New Trends in the Control of Grid-Connected Photovoltaic Systems for the Provision of Ancillary Services

Copyright: © 2022 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https:// creativecommons.org/licenses/by/ 4.0/).The gradual displacement of conventional generation from the energy mix to give way to renewable energy sources represents a paradigm shift in the operation of future power systems: on the one hand, renewable technologies are, in general, volatile and difficult to predict; and on the other hand, they are usually connected to the grid through electronic power converters. This decoupling due to power converters means that renewable generators lack the natural response that conventional generation has to the imbalances between demand and generation that occur during the regular operation of power systems. Renewable generators must, therefore, provide a series of complementary services for the correct operation of power systems in addition to producing the necessary amount of energy. This paper presents an overview of existing methods in the literature that allow photovoltaic generators to participate in the provision of ancillary services, focusing on solutions based on power curtailment by modifying the traditional maximum power point tracking algorithm

Power Ramp-Rate Control via power regulation for storageless grid-connected photovoltaic systems

Photovoltaic Power Ramp-Rate Control (PRRC) constitutes a key ancillary service for future power systems. Although its implementation through the installation of storage systems or irradiance sensors has been widely investigated, fewer studies have explored the power curtailment approach. The latter lacks efficiency, as it voluntarily produces power discharges, yet it is a cost-effective solution in terms of capital expenditures. This paper proposes a novel storageless and sensorless photovoltaic PRRC for grid-connected applications in which the photovoltaic power, rather than the voltage, is the controlled magnitude. The aforementioned contribution makes the effective tracking of the power ramp-rate limit possible compared to the existing methods in the literature. The method is assisted by a real-time curve-fitting algorithm that estimates the Maximum Power Point while operating suboptimally. Thus, no direct temperature or irradiance measurement systems are needed. The validation of the proposed PRRC strategy has been tested by simulation and compared to another approach available in the literature, considering real-field highly variable irradiance data. Experimental validation of the proposed strategy has been performed in real time via Controller Hardware-in-the-Loop.Agencia Estatal de Investigación PID2019-108966RB-I0

Power Management Strategies for Islanded Microgrids

The focus of this thesis is on developing power management strategies for islanded microgrids, at the primary and the secondary hierarchal control layers. At the Primary Control Layer, the main objective of the proposed strategies is to achieve decentralized power management of Photovoltaic (PV) and battery storage in islanded microgrids. In contrast to the common approach of controlling the PV unit as a current source, in the proposed strategies, the PV unit is controlled as a voltage source that follows a multi-segment adaptive power/frequency characteristic curve. The strategies are implemented locally at the units using multi-loop controllers without relying on a central management system and communications, as most of the existing algorithms do. At the Secondary Control Layer, strategies are developed to improve reactive power sharing in islanded microgrids. The proposed controllers are shown to still outperform conventional droop technique during communication failures. In addition, the reactive power sharing accuracy based on the proposed strategy is immune to the time delay in the communication channel. The sensitivity of the tuned controller parameters to changes in the system operating point is also explored. The net control action of the proposed controllers is demonstrated to have a negligible effect on the microgrid bus voltage. The proposed strategies are validated using experimental results from a 4.0 kVA prototype microgrid

Control and Energy Management of Standalone Interconnected AC Microgrids

This thesis considered microgrids as local area distribution mini-power grids formed by distributed generation sources, energy storage systems and loads. They are reliable and can operate at different voltages and frequencies to meet the requirements of the load. Microgrids have limited renewable energy source (RES) capacity, which can only supply a limited load and increasing the load beyond a specifically designed limit can lead to stability issues. Irrespective of its limited capacity, there has been an increased widespread deployment of renewable energy-based microgrids worldwide orchestrated by the 2015 Paris Agreement and the war in Ukraine and as a solution to meet the global demand for energy in electricity deficit zones aimed to achieve universal access to affordable, reliable, and sustainable energy. Fast forward to the future, flooded singly operated microgrids face the problem of more curtailing of RES and load shedding. Multiple microgrids can be interconnected to mitigate the limitations of single microgrids and improve supply reliability, enhance power supply availability, stability, reserve capacity, reduce investment in new generating capacity and control flexibility. As a result, this thesis proposes a new structure and control technique for interconnecting multiple standalone AC microgrids to a common alternating current (AC) bus using a back-to-back power electronic converter and a traditional transformer. Each microgrid considered in this thesis comprises a renewable energy source (RES), battery, auxiliary unit, and load. The battery maintains the AC bus voltage and frequency and balances the difference in power generated by the RES and that consumed by the load. Each microgrid battery’s charge/discharge is maintained within the safest operating limit to maximise the RES power utilisation. The back-to-back converters are used to decouple the connecting standalone microgrid frequencies and facilitate power exchange between microgrids. The transformer is used to transmit electric power over long distances efficiently. The control technique for all the connecting bidirectional back-to-back converters is developed to manage the bidirectional power flow between each microgrid and other microgrids in the network and to balance the energy in the global bus of the interconnected microgrid with no communication. The control strategy uses a frequency signalling mechanism to limit the power demand of individual global converters and adjusts its droop coefficients accordingly and in proportion to deviation in frequency. The global droop controllers of the global connecting converters receive information about the status of the frequencies of individual microgrids using a low bandwidth communication link to enhance network power flow. MATLAB/Simulink results validate the performance of the proposed structure and control strategy. A decentralised control scheme is further proposed for the standalone interconnected AC microgrid structure. This thesis presented a high-level global droop controller that exchanges power between the interconnected microgrids. Renewable power curtailment and auxiliary power supplement mechanisms are designed based on the bus frequency signalling technique to achieve balance and continuity of supply. In case of power shortage in one microgrid, priority will first be given to power import from other microgrids. A power supplement is used if the power imported is insufficient to control the battery state of charge (SOC). Similarly, in case of a power surplus, priority will be given to power export, and if this is not enough, power from RES will be curtailed. Performance evaluation shows that the proposed controller maximises renewable power utilisation and minimises auxiliary power usage while providing better load support. The performance validation of the proposed structure and control strategy has been tested using MATLAB/Simulink. Furthermore, this thesis investigated a centralised control and energy management of multiple interconnected standalone AC microgrids using the Nelder-Mead simplex algorithm (Fminsearch optimisation toolbox in MATLAB) based on the new proposed model. The main objective is to minimise the total cost of energy from the auxiliary unit produced from gas. The results obtained are compared with those obtained from an unoptimised system. The performance evaluation investigation results are compared with the unoptimised results to determine the percentage optimal performance of the system. The comparison outcome shows that the proposed optimisation method minimises the total auxiliary energy cost by about 9% compared with the results of the unoptimised benchmark

Flexible active power control for PV‐ESS systems:A review

The penetration of solar energy in the modern power system is still increasing with a fast growth rate after long development due to reduced environmental impact and ever-decreasing photovoltaic panel cost. Meanwhile, distribution networks have to deal with a huge amount and frequent fluctuations of power due to the intermittent nature of solar energy, which influences the grid stability and could cause a voltage rise in the low-voltage grid. In order to reduce these fluctuations and ensure a stable and reliable power supply, energy storage systems are introduced, as they can absorb or release energy on demand, which provides more control flexibility for PV systems. At present, storage technologies are still under development and integrated in renewable applications, especially in smart grids, where lowering the cost and enhancing the reliability are the main tasks. This study reviews and discusses several active power control strategies for hybrid PV and energy storage systems that deliver ancillary services for grid support. The technological advancements and developments of energy storage systems in grid-tied PV applications are also reviewed