A Low-Voltage Electronically Tunable MOSFET-C Voltage-Mode First-Order All-Pass Filter Design

This paper presents a simple electronically tunable voltage-mode first-order all-pass filter realization with MOSFET-C technique. In comparison to the classical MOSFET-C filter circuits that employ active elements including large number of transistors the proposed circuit is only composed of a single two n-channel MOSFET-based inverting voltage buffer, three passive components, and one NMOS-based voltage-controlled resistor, which is with advantage used to electronically control the pole frequency of the filter in range 103 kHz to 18.3 MHz. The proposed filter is also very suitable for low-voltage operation, since between its supply rails it uses only two MOSFETs. In the paper the effect of load is investigated. In addition, in order to suppress the effect of non-zero output resistance of the inverting voltage buffer, two compensation techniques are also introduced. The theoretical results are verified by SPICE simulations using PTM 90 nm level-7 CMOS process BSIM3v3 parameters, where +/- 0.45 V supply voltages are used. Moreover, the behavior of the proposed filter was also experimentally measured using readily available array transistors CD4007UB by Texas Instruments

Lossy/Lossless Floating/Grounded Inductance Simulation Using One DDCC

In this work, we present new topologies for realizing one lossless grounded inductor and two floating, one lossless and one lossy, inductors employing a single differential difference current conveyor (DDCC) and a minimum number of passive components, two resistors, and one grounded capacitor. The floating inductors are based on ordinary dual-output differential difference current conveyor (DO-DDCC) while the grounded lossless inductor is based one a modified dual-output differential difference current conveyor (MDO-DDCC). The proposed lossless floating inductor is obtained from the lossy one by employing a negative impedance converter (NIC). The non-ideality effects of the active element on the simulated inductors are investigated. To demonstrate the performance of the proposed grounded inductance simulator as an example, it is used to construct a parallel resonant circuit. SPICE simulation results are given to confirm the theoretical analysis

Novel Resistorless Mixed-Mode PID Controller with Improved Low-Frequency Performance

This paper introduces a new resistorless mixed-mode proportional-integral-derivative (PID) controller. It employs six simple transconductors and only two grounded capacitors. The proposed PID controller offers several advantageous features of resistorless configuration, use of grounded capacitors, independent electronic-tuning characteristic of its parameters, and mixed-mode operation such as current, transimpedance, transadmittance, and voltage modes. The parasitic element effects of the transconductors on the proposed controller are investigated and the improved low-frequency performance of the proposed controller is then discussed. As applications, the proposed controller is demonstrated on two closed-loop systems. The PSPICE simulations with TSMC 0.18µm CMOS process and ±0.9V supply voltage verify the theoretical analysis

Biquadratic Filter Applications Using a Fully-Differential Active-Only Integrator

A new class of active filters, real active-only filters is described and possible implementation issues of these filters are discussed. To remedy these issues, a fully-differential active-only integrator block built around current controlled current conveyors is presented. The integration frequency of the proposed circuit is adjustable over a wide frequency range. As an application, a real active-only filter based on the classical two-integrator loop topology is presented and designed. The feasibility of this filter in a 0.35µm CMOS process is verified through SPECTRE simulation program in the CADENCE design tool

Realization of Low-Voltage Modified CBTA and Design of Cascadable Current-Mode All-Pass Filter

In this paper, a low voltage modified current backward transconductance amplifier (MCBTA) and a novel first-order current-mode (CM) all-pass filter are presented. The MCBTA can operate with ±0.9 V supply voltage and the total power consumption of MCBTA is 1.27 mW. The presented all-pass filter employs single MCBTA, a grounded resistor and a grounded capacitor. The circuit possesses low input and high output impedances which make it ideal for current-mode systems. The presented all-pass filter circuit can be made electronically tunable due to the bias current of the MCBTA. Non-ideal study along with simulation results are given for validation purpose. Further, an nth-order cascadable all-pass filter is also presented. It uses n MCBTAs, n grounded resistors and n grounded capacitors. The performance of the proposed circuits is demonstrated by using PSPICE simulations based on the 0.18 µm TSMC level-7 CMOS technology parameters

DCCII-Based Novel Lossless Grounded Inductance Simulators With No Element Matching Constrains

In 1996, the differential current conveyor (DCCII) was introduced as a versatile active element with current differencing capability. Therefore, in this study, the usefulness of the DCCII is shown on six novel lossless grounded inductance simulator circuits. Proposed circuits simultaneously employ minimum number of elements, i.e. single DCCII, one capacitor, and two resistors. No passive element matching restriction is needed and all solutions are electronically tunable in case that one of resistors is replaced by MOSFET-based voltage-controlled resistor. The internal structure of the active element has been implemented using the TSMC 0.25 um SCN025 CMOS process BSIM3v3.1 parameters. Firstly, the performance of the selected inductor simulator is evaluated and subsequently verified in the design of 5th-order high-pass ladder and 2nd-order frequency filters. In addition, experimental results using commercially available AD844/ADs are given to verify the theoretical analysis and SPICE simulations

Supplementary Inductance Simulator Topologies Employing Single DXCCII

In this study, six grounded inductance simulator circuits are presented including additional useful features in comparison to previous dual-X current conveyor (DXCCII) based implementations. To demonstrate the performance and usefulness of the presented circuits, one of them is used to construct a fifth order Butterworth high-pass filter and a current-mode multifunction filter as application examples. Simulation results are given to confirm the theoretical analysis. The derived DXCCII and its applications are simulated using CMOS 0.35 μm technology

Insights into dynamic tuning of magnetic-resonant wireless power transfer receivers based on switch-mode gyrators

Magnetic-resonant wireless power transfer (WPT) has become a reliable contactless source of power for a wide range of applications. WPT spans different power levels ranging from low-power implantable devices up to high-power electric vehicles (EV) battery charging. The transmission range and efficiency of WPT have been reasonably enhanced by resonating the transmitter and receiver coils at a common frequency. Nevertheless, matching between resonance in the transmitter and receiver is quite cumbersome, particularly in single-transmitter multi-receiver systems. The resonance frequency in transmitter and receiver tank circuits has to be perfectly matched, otherwise power transfer capability is greatly degraded. This paper discusses the mistuning effect of parallel-compensated receivers, and thereof a novel dynamic frequency tuning method and related circuit topology and control is proposed and characterized in the system application. The proposed method is based on the concept of switch-mode gyrator emulating variable lossless inductors oriented to enable self-tunability in WPT receiversPeer ReviewedPostprint (published version

Reconfigurable of current-mode differentiator and integrator based-on current conveyor transconductance amplifiers

The reconfigurable of the differentiator and integrator based on current conveyor transconductance amplifiers (CCTAs) have been presented in this paper. The proposed configurations are provided with two CCTAs and grounded elements. The configurations can be operated in the differentiator and integrator by selecting external passive elements. The input and output currents have low and high impedances, respectively; therefore, the configurations can be cascaded without additional current buffer. The proposed configurations can be electronically tuned by external direct current (DC) bias currents, and it also has slight fluctuation with temperature. An application of universal filter is demonstrated to confirm the ability of the proposed configurations. The results of simulation with Pspice program are accordance with the theoretical analysis