Joint Source and Relay Precoding Designs for MIMO Two-Way Relaying Based on MSE Criterion

Properly designed precoders can significantly improve the spectral efficiency of multiple-input multiple-output (MIMO) relay systems. In this paper, we investigate joint source and relay precoding design based on the mean-square-error (MSE) criterion in MIMO two-way relay systems, where two multi-antenna source nodes exchange information via a multi-antenna amplify-and-forward relay node. This problem is non-convex and its optimal solution remains unsolved. Aiming to find an efficient way to solve the problem, we first decouple the primal problem into three tractable sub-problems, and then propose an iterative precoding design algorithm based on alternating optimization. The solution to each sub-problem is optimal and unique, thus the convergence of the iterative algorithm is guaranteed. Secondly, we propose a structured precoding design to lower the computational complexity. The proposed precoding structure is able to parallelize the channels in the multiple access (MAC) phase and broadcast (BC) phase. It thus reduces the precoding design to a simple power allocation problem. Lastly, for the special case where only a single data stream is transmitted from each source node, we present a source-antenna-selection (SAS) based precoding design algorithm. This algorithm selects only one antenna for transmission from each source and thus requires lower signalling overhead. Comprehensive simulation is conducted to evaluate the effectiveness of all the proposed precoding designs.Comment: 32 pages, 10 figure

Code designs for MIMO broadcast channels

Recent information-theoretic results show the optimality of dirty-paper coding (DPC) in achieving the full capacity region of the Gaussian multiple-input multiple-output (MIMO) broadcast channel (BC). This paper presents a DPC based code design for BCs. We consider the case in which there is an individual rate/signal-to-interference-plus-noise ratio (SINR) constraint for each user. For a fixed transmitter power, we choose the linear transmit precoding matrix such that the SINRs at users are uniformly maximized, thus ensuring the best bit-error rate performance. We start with Cover's simplest two-user Gaussian BC and present a coding scheme that operates 1.44 dB from the boundary of the capacity region at the rate of one bit per real sample (b/s) for each user. We then extend the coding strategy to a two-user MIMO Gaussian BC with two transmit antennas at the base-station and develop the first limit-approaching code design using nested turbo codes for DPC. At the rate of 1 b/s for each user, our design operates 1.48 dB from the capacity region boundary. We also consider the performance of our scheme over a slow fading BC. For two transmit antennas, simulation results indicate a performance loss of only 1.4 dB, 1.64 dB and 1.99 dB from the theoretical limit in terms of the total transmission power for the two, three and four user case, respectively

Linear Precoding and Equalization for Network MIMO with Partial Cooperation

A cellular multiple-input multiple-output (MIMO) downlink system is studied in which each base station (BS) transmits to some of the users, so that each user receives its intended signal from a subset of the BSs. This scenario is referred to as network MIMO with partial cooperation, since only a subset of the BSs are able to coordinate their transmission towards any user. The focus of this paper is on the optimization of linear beamforming strategies at the BSs and at the users for network MIMO with partial cooperation. Individual power constraints at the BSs are enforced, along with constraints on the number of streams per user. It is first shown that the system is equivalent to a MIMO interference channel with generalized linear constraints (MIMO-IFC-GC). The problems of maximizing the sum-rate(SR) and minimizing the weighted sum mean square error (WSMSE) of the data estimates are non-convex, and suboptimal solutions with reasonable complexity need to be devised. Based on this, suboptimal techniques that aim at maximizing the sum-rate for the MIMO-IFC-GC are reviewed from recent literature and extended to the MIMO-IFC-GC where necessary. Novel designs that aim at minimizing the WSMSE are then proposed. Extensive numerical simulations are provided to compare the performance of the considered schemes for realistic cellular systems.Comment: 13 pages, 5 figures, published in IEEE Transactions on Vehicular Technology, June 201

Retrospective Interference Alignment for the MIMO Interference Broadcast Channel

The degrees of freedom (DoF) of the multiple-input multiple-output (MIMO) Interference Broadcast Channel (IBC) with 2 cells and 2 users per cell are investigated when only delayed channel state information is available at the transmitter side (delayed CSIT). Retrospective Interference Alignment has shown the benefits in terms of DoF of exploiting delayed CSIT for interference, broadcast and also for the IBC. However, previous works studying the IBC with delayed CSIT do not exploit the fact that the users of each cell are served by a common transmitter. This work presents a four-phase precoding strategy taking this into consideration. Assuming that transmitters and receivers are equipped with $M,N$ antennas, respectively, new DoF inner bounds are proposed, outperforming the existing ones for $\rho = \frac{M}{N} > 2.6413$.Comment: 1 copyright page + 5 paper pages + 3 appendix pages, Submitted to IEEE ISIT 201

Designing Multi-User MIMO for Energy Efficiency: When is Massive MIMO the Answer?

Assume that a multi-user multiple-input multiple-output (MIMO) communication system must be designed to cover a given area with maximal energy efficiency (bit/Joule). What are the optimal values for the number of antennas, active users, and transmit power? By using a new model that describes how these three parameters affect the total energy efficiency of the system, this work provides closed-form expressions for their optimal values and interactions. In sharp contrast to common belief, the transmit power is found to increase (not decrease) with the number of antennas. This implies that energy efficient systems can operate at high signal-to-noise ratio (SNR) regimes in which the use of interference-suppressing precoding schemes is essential. Numerical results show that the maximal energy efficiency is achieved by a massive MIMO setup wherein hundreds of antennas are deployed to serve relatively many users using interference-suppressing regularized zero-forcing precoding.Comment: Published at IEEE Wireless Communications and Networking Conference (WCNC 2014), 6 pages, 5 figures, 1 table. This version improves the visual presentation of Fig. 2 and corrects a typo in Lemma

Sum-Rate Maximization for Linearly Precoded Downlink Multiuser MISO Systems with Partial CSIT: A Rate-Splitting Approach

This paper considers the Sum-Rate (SR) maximization problem in downlink MU-MISO systems under imperfect Channel State Information at the Transmitter (CSIT). Contrary to existing works, we consider a rather unorthodox transmission scheme. In particular, the message intended to one of the users is split into two parts: a common part which can be recovered by all users, and a private part recovered by the corresponding user. On the other hand, the rest of users receive their information through private messages. This Rate-Splitting (RS) approach was shown to boost the achievable Degrees of Freedom (DoF) when CSIT errors decay with increased SNR. In this work, the RS strategy is married with linear precoder design and optimization techniques to achieve a maximized Ergodic SR (ESR) performance over the entire range of SNRs. Precoders are designed based on partial CSIT knowledge by solving a stochastic rate optimization problem using means of Sample Average Approximation (SAA) coupled with the Weighted Minimum Mean Square Error (WMMSE) approach. Numerical results show that in addition to the ESR gains, the benefits of RS also include relaxed CSIT quality requirements and enhanced achievable rate regions compared to conventional transmission with NoRS.Comment: accepted to IEEE Transactions on Communication