A multiple-bus, active backplane architecture for multiprocessor systems

This research investigates several problems associated with current multiprocessor interconnection networks, focusing primarily on general-purpose, shared-memory configurations. The project deals with all aspects of the interconnection, from the architectural level to the physical backplane. A bus-based architecture is presented as an alternative to the limitations of current schemes. This dissertation will focus on the physical layer implementation;For increased reliability, performance and scalability, a multiple-bus architecture is proposed. Each bus uses a word-serial approach to keep the total number of bus signals manageable. A source-synchronous transfer protocol allows data to be streamed at a high rate, thus increasing the pin-efficiency of the bus. The control acquisition scheme combines collision detection and priority arbitration to minimize bus access time without requiring additional signal lines. Cache coherence, message passing, and synchronization primitives are provided within the bus protocol to support multiple-processor systems;To reduce the capacitive loading on the bus, an active backplane is employed. This moves the transceiver and bus interface unit from the plug-in module down to the backplane. In addition to increasing the characteristic impedance of the bus, it also reduces the end-to-end propagation delay. Another advantage of moving the bus transceivers to the backplane is the uniform load presented to the bus, regardless of whether a slot is populated;Due to the reduction in drive current required, a custom CMOS transceiver, suitable for VLSI implementation, is used. It incorporates the collision detection circuitry required for the control acquisition scheme. Initial transceiver prototypes have been designed and fabricated in 2-[mu]m CMOS. These have been successfully tested at transfer rates in excess of 50MHz

A logical layer protocol for ActiveBus architecture

This research investigates several problems associated with current multiprocessor interconnection networks, focusing primarily on general-purpose, shared-memory configurations. The project deals with all aspects of the interconnection, from the architectural level to the physical backplane. A multiple-bus based architecture is presented as an alternative to the limitations of current schemes. This dissertation will focus on the logical layer specification;The ActiveBus--a multiple, active bus--interconnection is proposed. Multiple buses increase the bandwidth as well as reliability of the interconnection while the active backplane shows a reduced and uniform capacitive load;A logical layer protocol was designed for each bus to work independently, to achieve fault tolerance. Each bus uses a word-serial approach to keep the total number of bus signal lines manageable. A dual clocking scheme is proposed. The faster clock is used for data transfer. The other clock, refered to as sync clock, is used for arbitration and handshaking;Absence of discontinuities on the bus coupled with a source-synchronous transfer protocol allows data to be streamed at a high rate, thus increasing the pin-efficiency of the bus. The data transmission rate is limited only by clock skew. In addition, the ActiveBus interface unit and the source synchronous protocol move the synchronization penalty from the shared bus to the private buffer in the unit;The protocol uses a new arbitration scheme, termed Previous Priority First. This hybrid control acquisition scheme combines collision detection and priority arbitration to minimize bus access time without requiring additional signal lines. Collision detection provides a quick access in an unsaturated system while priority arbitration guarantees the deterministic election of the master in a saturated system. The scheme also incorporates a fairness mode to minimize starvation and bus access delay in the system;The cache coherence scheme supports both copy-back and write-through policies to reduce the overhead. MOESI protocol with snoopy caches, being the most general, is followed. Message passing and synchronization primitives are provided within the bus protocol to support multiple processor systems. These primitives attempt to minimize the traffic generated by the spin locks or the memory hot spots

On-chip interconnect schemes for reconfigurable system-on-chip

On-chip communication architectures can have a great influence on the speed and area of System-on-Chip designs, and this influence is expected to be even more pronounced on reconfigurable System-on-Chip (rSoC) designs. To date, little research has been conducted on the performance implications of different on-chip communication architectures for rSoC designs. This paper motivates the need for such research and analyses current and proposed interconnect technologies for rSoC design. The paper also describes work in progress on implementation of a simple serial bus and a packet-switched network, as well as a methodology for quantitatively evaluating the performance of these interconnection structures in comparison to conventional buses

RAID-2: Design and implementation of a large scale disk array controller

We describe the implementation of a large scale disk array controller and subsystem incorporating over 100 high performance 3.5 inch disk drives. It is designed to provide 40 MB/s sustained performance and 40 GB capacity in three 19 inch racks. The array controller forms an integral part of a file server that attaches to a Gb/s local area network. The controller implements a high bandwidth interconnect between an interleaved memory, an XOR calculation engine, the network interface (HIPPI), and the disk interfaces (SCSI). The system is now functionally operational, and we are tuning its performance. We review the design decisions, history, and lessons learned from this three year university implementation effort to construct a truly large scale system assembly

Wishbone bus Architecture - A Survey and Comparison

The performance of an on-chip interconnection architecture used for communication between IP cores depends on the efficiency of its bus architecture. Any bus architecture having advantages of faster bus clock speed, extra data transfer cycle, improved bus width and throughput is highly desirable for a low cost, reduced time-to-market and efficient System-on-Chip (SoC). This paper presents a survey of WISHBONE bus architecture and its comparison with three other on-chip bus architectures viz. Advanced Micro controller Bus Architecture (AMBA) by ARM, CoreConnect by IBM and Avalon by Altera. The WISHBONE Bus Architecture by Silicore Corporation appears to be gaining an upper edge over the other three bus architecture types because of its special performance parameters like the use of flexible arbitration scheme and additional data transfer cycle (Read-Modify-Write cycle). Moreover, its IP Cores are available free for use requiring neither any registration nor any agreement or license.Comment: 18 page

A Study of Multiprocessor Systems using the Picoblaze 8-bit Microcontroller Implemented on Field Programmable Gate Arrays

As Field Programmable Gate Arrays (FPGAs) are becoming more capable of implementing complex logic circuits, designers are increasingly choosing them over traditional microprocessor-based systems for implementing digital controllers and digital signal processing applications. Indeed, as FPGAs are being built using state-of-the-art deep submicron CMOS processes, the increased amount of logic and memory resources allows such FPGA-based implementations to compete in terms of speed, complexity, and power dissipation with most custom-built chips, but at a fraction of the development costs. The modern FPGA is now capable of implementing multiple instances of configurable processors that are completely specified by a high-level descriptor language. Such arrays of soft processor cores have opened up new design possibilities that include complex embedded systems applications that were previously implemented by custom multiprocessor chips. As the FPGA-based multiprocessor system is completely configurable by the user, it can be optimized for speed and power dissipation to fit a given application. The goal of this thesis is to investigate design methods for implementing an array of soft processor cores using the Xilinx FPGA-based 8-bit microcontroller known as PicoBlaze. While development tools exist for the larger 32-bit processor from Xilinx known as MicroBlaze, no such resources are currently available for the PicoBlaze microcontroller. PicoBlaze benefits in applications that requires only less data bits (less than 8 bits). For example, consider the gene sequencing or DNA sequencing in which the processing requires only 2 to 5 bits. In such an application, PicoBlaze can be a simple processor to produce the results. Also, the PicoBlaze unit offers a finer level of granularity and hence consumes fewer resources than the larger 32-bit MicroBlaze processor. Hence, the former will find applications in embedded systems requiring a complex design to be partitioned over several processors but where only an 8-bit datapath is required

Master of Science

thesisIntegrated circuits often consist of multiple processing elements that are regularly tiled across the two-dimensional surface of a die. This work presents the design and integration of high speed relative timed routers for asynchronous network-on-chip. It researches NoC's efficiency through simplicity by directly translating simple T-router, source-routing, single-flit packet to higher radix routers. This work is intended to study performance and power trade-offs adding higher radix routers, 3D topologies, Virtual Channels, Accurate NoC modeling, and Transmission line communication links. Routers with and without virtual channels are designed and integrated to arrayed communication networks. Furthermore, the work investigates 3D networks with diffusive RC wires and transmission lines on long wrap interconnects

Doctor of Philosophy

dissertationPortable electronic devices will be limited to available energy of existing battery chemistries for the foreseeable future. However, system-on-chips (SoCs) used in these devices are under a demand to offer more functionality and increased battery life. A difficult problem in SoC design is providing energy-efficient communication between its components while maintaining the required performance. This dissertation introduces a novel energy-efficient network-on-chip (NoC) communication architecture. A NoC is used within complex SoCs due it its superior performance, energy usage, modularity, and scalability over traditional bus and point-to-point methods of connecting SoC components. This is the first academic research that combines asynchronous NoC circuits, a focus on energy-efficient design, and a software framework to customize a NoC for a particular SoC. Its key contribution is demonstrating that a simple, asynchronous NoC concept is a good match for low-power devices, and is a fruitful area for additional investigation. The proposed NoC is energy-efficient in several ways: simple switch and arbitration logic, low port radix, latch-based router buffering, a topology with the minimum number of 3-port routers, and the asynchronous advantages of zero dynamic power consumption while idle and the lack of a clock tree. The tool framework developed for this work uses novel methods to optimize the topology and router oorplan based on simulated annealing and force-directed movement. It studies link pipelining techniques that yield improved throughput in an energy-efficient manner. A simulator is automatically generated for each customized NoC, and its traffic generators use a self-similar message distribution, as opposed to Poisson, to better match application behavior. Compared to a conventional synchronous NoC, this design is superior by achieving comparable message latency with half the energy

Exploring Adaptive Implementation of On-Chip Networks

As technology geometries have shrunk to the deep submicron regime, the communication delay and power consumption of global interconnections in high performance Multi- Processor Systems-on-Chip (MPSoCs) are becoming a major bottleneck. The Network-on- Chip (NoC) architecture paradigm, based on a modular packet-switched mechanism, can address many of the on-chip communication issues such as performance limitations of long interconnects and integration of large number of Processing Elements (PEs) on a chip. The choice of routing protocol and NoC structure can have a significant impact on performance and power consumption in on-chip networks. In addition, building a high performance, area and energy efficient on-chip network for multicore architectures requires a novel on-chip router allowing a larger network to be integrated on a single die with reduced power consumption. On top of that, network interfaces are employed to decouple computation resources from communication resources, to provide the synchronization between them, and to achieve backward compatibility with existing IP cores. Three adaptive routing algorithms are presented as a part of this thesis. The first presented routing protocol is a congestion-aware adaptive routing algorithm for 2D mesh NoCs which does not support multicast (one-to-many) traffic while the other two protocols are adaptive routing models supporting both unicast (one-to-one) and multicast traffic. A streamlined on-chip router architecture is also presented for avoiding congested areas in 2D mesh NoCs via employing efficient input and output selection. The output selection utilizes an adaptive routing algorithm based on the congestion condition of neighboring routers while the input selection allows packets to be serviced from each input port according to its congestion level. Moreover, in order to increase memory parallelism and bring compatibility with existing IP cores in network-based multiprocessor architectures, adaptive network interface architectures are presented to use multiple SDRAMs which can be accessed simultaneously. In addition, a smart memory controller is integrated in the adaptive network interface to improve the memory utilization and reduce both memory and network latencies. Three Dimensional Integrated Circuits (3D ICs) have been emerging as a viable candidate to achieve better performance and package density as compared to traditional 2D ICs. In addition, combining the benefits of 3D IC and NoC schemes provides a significant performance gain for 3D architectures. In recent years, inter-layer communication across multiple stacked layers (vertical channel) has attracted a lot of interest. In this thesis, a novel adaptive pipeline bus structure is proposed for inter-layer communication to improve the performance by reducing the delay and complexity of traditional bus arbitration. In addition, two mesh-based topologies for 3D architectures are also introduced to mitigate the inter-layer footprint and power dissipation on each layer with a small performance penalty.Siirretty Doriast