A parallel algorithm for switch-level timing simulation on a hypercube multiprocessor

The parallel approach to speeding up simulation is studied, specifically the simulation of digital LSI MOS circuitry on the Intel iPSC/2 hypercube. The simulation algorithm is based on RSIM, an event driven switch-level simulator that incorporates a linear transistor model for simulating digital MOS circuits. Parallel processing techniques based on the concepts of Virtual Time and rollback are utilized so that portions of the circuit may be simulated on separate processors, in parallel for as large an increase in speed as possible. A partitioning algorithm is also developed in order to subdivide the circuit for parallel processing

Survey of partitioning techniques in silicon compilation

In the silicon compilation design process, partitioning is usually the first problem to be investigated because partitioning algorithms form the backbone of many algorithms including: system synthesis, processor synthesis, floorplanning, and placement. In this survey, several partitioning techniques will be examined. In addition, this paper will review the partitioning algorithms used by synthesis systems at different design levels

On testing VLSI chips for the big Viterbi decoder

A general technique that can be used in testing very large scale integrated (VLSI) chips for the Big Viterbi Decoder (BVD) system is described. The test technique is divided into functional testing and fault-coverage testing. The purpose of functional testing is to verify that the design works functionally. Functional test vectors are converted from outputs of software simulations which simulate the BVD functionally. Fault-coverage testing is used to detect and, in some cases, to locate faulty components caused by bad fabrication. This type of testing is useful in screening out bad chips. Finally, design for testability, which is included in the BVD VLSI chip design, is described in considerable detail. Both the observability and controllability of a VLSI chip are greatly enhanced by including the design for the testability feature

Low Power Processor Architectures and Contemporary Techniques for Power Optimization – A Review

The technological evolution has increased the number of transistors for a given die area significantly and increased the switching speed from few MHz to GHz range. Such inversely proportional decline in size and boost in performance consequently demands shrinking of supply voltage and effective power dissipation in chips with millions of transistors. This has triggered substantial amount of research in power reduction techniques into almost every aspect of the chip and particularly the processor cores contained in the chip. This paper presents an overview of techniques for achieving the power efficiency mainly at the processor core level but also visits related domains such as buses and memories. There are various processor parameters and features such as supply voltage, clock frequency, cache and pipelining which can be optimized to reduce the power consumption of the processor. This paper discusses various ways in which these parameters can be optimized. Also, emerging power efficient processor architectures are overviewed and research activities are discussed which should help reader identify how these factors in a processor contribute to power consumption. Some of these concepts have been already established whereas others are still active research areas. © 2009 ACADEMY PUBLISHER

Interconnect research influenced

This article shows that Rent's rule can be viewed as a fundamental law of nature with respect to electronic circuits. As there are many interpretations of the rule, this article will shed some light on the core of Rent's rule and the research that has been built on it

Performance Comparison of Static CMOS and Domino Logic Style in VLSI Design: A Review

Of late, there is a steep rise in the usage of handheld gadgets and high speed applications. VLSI designers often choose static CMOS logic style for low power applications. This logic style provides low power dissipation and is free from signal noise integrity issues. However, designs based on this logic style often are slow and cannot be used in high performance circuits. On the other hand designs based on Domino logic style yield high performance and occupy less area. Yet, they have more power dissipation compared to their static CMOS counterparts. As a practice, designers during circuit synthesis, mix more than one logic style judiciously to obtain the advantages of each logic style. Carefully designing a mixed static Domino CMOS circuit can tap the advantages of both static and Domino logic styles overcoming their own short comings

A new partitioning approach for layout synthesis from register-transfer netlists

Most of the IC today are described and documented using heiarchical netlists. In addition to gates, latches, and flip-flops, these netlists include sliceable register-transfer components such as registers, counters, adders, ALUs, shifters, register files, and multiplexers. Usually, these components are decomposed into basic gates, latches, and flip-flops, and are laid out using standard cells. The standard cell architecture requires excessive routing area, and does not exploit the bit-sliced nature of register-transfer components. In this paper, we present a new sliced-layout architecture to alleviate the preceding problems. We also describe partitioning algorithms that are used to generate the floorplan for this layout architecture. The partitioning algorithms not only select the best suited layout style for each component, but also consider critical paths, I/O pin locations, and connections between blocks. This approach improves the overall area utilization and minimizes the total wire length