Multi - mechanism coalescence design and matrix expression of logic action sequences of the over-turn nursing robot Part I: Functions and coalescence design

In order to effectively solve the problem in over-turn of a bedridden person with the assistance of external force, a double bed face- three embedded leave over-turn nursing robot with the flexible compensation was put forward, with the abstraction of the bedridden person as an organism. This robot, on the basis of concept gesture of the person in bed and the state of the robot supporting and proving the gesture with the actions and combination of the two bed faces, held the complete function of over-turn nursing with 7 states corresponding to 5 gestures of the bedridden person obeying the fundamental requirements of safety, rapidity, and comport. The design method of "PS-MM-KD" was proposed for multi-mechanism coalescent system with related specific tasks induced from the original problems with Systems Engineering. Mechanics and Mechanisms, then applied in the concrete sub-system design followed by analysis and verification of both the scheme and the sub-systems in the design, using the Kinematics and Dynamics, implementing the gears, chain wheel, slewing mechanism, screw nut and mortise and tenon joint type clutch mechanism design successfully. Based on those above, a "two-bed face/three-leaf embedded flexible compensation nursing robot" was designed adopting to all ages, people of various kinds of body geometry. PLC, sensor and logic algorithm were used to carry out the control and operation of 7 state-5 posture sequences for realization of the automation and intelligent over-turning in safety, comfort, and convenience

An interactive interface for nursing robots.

Physical Human-Robot Interaction (pHRI) is inevitable for a human user while working with assistive robots. There are various aspects of pHRI, such as choosing the interface, type of control schemes implemented and the modes of interaction. The research work presented in this thesis concentrates on a health-care assistive robot called Adaptive Robot Nursing Assistant (ARNA). An assistive robot in a health-care environment has to be able to perform routine tasks and be aware of the surrounding environment at the same time. In order to operate the robot, a teleoperation based interaction would be tedious for some patients as it would require a high level of concentration and can cause cognitive fatigue. It would also require a learning curve for the user in order to teleoperate the robot efficiently. The research work involves the development of a proposed Human-Machine Interface (HMI) framework which integrates the decision-making module, interaction module, and a tablet interface module. The HMI framework integrates a traded control based interaction which allows the robot to take decisions on planning and executing a task while the user only has to specify the task through a tablet interface. According to the preliminary experiments conducted as a part of this thesis, the traded control based approach allows a novice user to operate the robot with the same efficiency as an expert user. Past researchers have shown that during a conversation with a speech interface, a user would feel disengaged if the answers received from the interface are not in the context of the conversation. The research work in this thesis explores the different possibilities of implementing a speech interface that would be able to reply to any conversational queries from the user. A speech interface was developed by creating a semantic space out of Wikipedia database using Latent Semantic Analysis (LSA). This allowed the speech interface to have a wide knowledge-base and be able to maintain a conversation in the same context as intended by the user. This interface was developed as a web-service and was deployed on two different robots to exhibit its portability and the ease of implementation with any other robot. In the work presented, a tablet application was developed which integrates speech interface and an onscreen button interface to execute tasks through ARNA robot. This tablet interface application can access video feed and sensor data from robots, assist the user with decision making during pick and place operations, monitor the user health over time, and provide conversational dialogue during sitting sessions. In this thesis, we present the software and hardware framework that enable a patient sitter HMI, and together with experimental results with a small number of users that demonstrate that the concept is sound and scalable

Collaborative human-machine interfaces for mobile manipulators.

The use of mobile manipulators in service industries as both agents in physical Human Robot Interaction (pHRI) and for social interactions has been on the increase in recent times due to necessities like compensating for workforce shortages and enabling safer and more efficient operations amongst other reasons. Collaborative robots, or co-bots, are robots that are developed for use with human interaction through direct contact or close proximity in a shared space with the human users. The work presented in this dissertation focuses on the design, implementation and analysis of components for the next-generation collaborative human machine interfaces (CHMI) needed for mobile manipulator co-bots that can be used in various service industries. The particular components of these CHMI\u27s that are considered in this dissertation include: Robot Control: A Neuroadaptive Controller (NAC)-based admittance control strategy for pHRI applications with a co-bot. Robot state estimation: A novel methodology and placement strategy for using arrays of IMUs that can be embedded in robot skin for pose estimation in complex robot mechanisms. User perception of co-bot CHMI\u27s: Evaluation of human perceptions of usefulness and ease of use of a mobile manipulator co-bot in a nursing assistant application scenario. To facilitate advanced control for the Adaptive Robotic Nursing Assistant (ARNA) mobile manipulator co-bot that was designed and developed in our lab, we describe and evaluate an admittance control strategy that features a Neuroadaptive Controller (NAC). The NAC has been specifically formulated for pHRI applications such as patient walking. The controller continuously tunes weights of a neural network to cancel robot non-linearities, including drive train backlash, kinematic or dynamic coupling, variable patient pushing effort, or slope surfaces with unknown inclines. The advantage of our control strategy consists of Lyapunov stability guarantees during interaction, less need for parameter tuning and better performance across a variety of users and operating conditions. We conduct simulations and experiments with 10 users to confirm that the NAC outperforms a classic Proportional-Derivative (PD) joint controller in terms of resulting interaction jerk, user effort, and trajectory tracking error during patient walking. To tackle complex mechanisms of these next-gen robots wherein the use of encoder or other classic pose measuring device is not feasible, we present a study effects of design parameters on methods that use data from Inertial Measurement Units (IMU) in robot skins to provide robot state estimates. These parameters include number of sensors, their placement on the robot, as well as noise properties on the quality of robot pose estimation and its signal-to-noise Ratio (SNR). The results from that study facilitate the creation of robot skin, and in order to enable their use in complex robots, we propose a novel pose estimation method, the Generalized Common Mode Rejection (GCMR) algorithm, for estimation of joint angles in robot chains containing composite joints. The placement study and GCMR are demonstrated using both Gazebo simulation and experiments with a 3-DoF robotic arm containing 2 non-zero link lengths, 1 revolute joint and a 2-DoF composite joint. In addition to yielding insights on the predicted usage of co-bots, the design of control and sensing mechanisms in their CHMI benefits from evaluating the perception of the eventual users of these robots. With co-bots being only increasingly developed and used, there is a need for studies into these user perceptions using existing models that have been used in predicting usage of comparable technology. To this end, we use the Technology Acceptance Model (TAM) to evaluate the CHMI of the ARNA robot in a scenario via analysis of quantitative and questionnaire data collected during experiments with eventual uses. The results from the works conducted in this dissertation demonstrate insightful contributions to the realization of control and sensing systems that are part of CHMI\u27s for next generation co-bots

Occupational health and safety issues in human-robot collaboration: State of the art and open challenges

Human-Robot Collaboration (HRC) refers to the interaction of workers and robots in a shared workspace. Owing to the integration of the industrial automation strengths with the inimitable cognitive capabilities of humans, HRC is paramount to move towards advanced and sustainable production systems. Although the overall safety of collaborative robotics has increased over time, further research efforts are needed to allow humans to operate alongside robots, with awareness and trust. Numerous safety concerns are open, and either new or enhanced technical, procedural and organizational measures have to be investigated to design and implement inherently safe and ergonomic automation solutions, aligning the systems performance and the human safety. Therefore, a bibliometric analysis and a literature review are carried out in the present paper to provide a comprehensive overview of Occupational Health and Safety (OHS) issues in HRC. As a result, the most researched topics and application areas, and the possible future lines of research are identified. Reviewed articles stress the central role played by humans during collaboration, underlining the need to integrate the human factor in the hazard analysis and risk assessment. Human-centered design and cognitive engineering principles also require further investigations to increase the worker acceptance and trust during collaboration. Deepened studies are compulsory in the healthcare sector, to investigate the social and ethical implications of HRC. Whatever the application context is, the implementation of more and more advanced technologies is fundamental to overcome the current HRC safety concerns, designing low-risk HRC systems while ensuring the system productivity

Mobile Health in Remote Patient Monitoring for Chronic Diseases: Principles, Trends, and Challenges

Chronic diseases are becoming more widespread. Treatment and monitoring of these diseases require going to hospitals frequently, which increases the burdens of hospitals and patients. Presently, advancements in wearable sensors and communication protocol contribute to enriching the healthcare system in a way that will reshape healthcare services shortly. Remote patient monitoring (RPM) is the foremost of these advancements. RPM systems are based on the collection of patient vital signs extracted using invasive and noninvasive techniques, then sending them in real-time to physicians. These data may help physicians in taking the right decision at the right time. The main objective of this paper is to outline research directions on remote patient monitoring, explain the role of AI in building RPM systems, make an overview of the state of the art of RPM, its advantages, its challenges, and its probable future directions. For studying the literature, five databases have been chosen (i.e., science direct, IEEE-Explore, Springer, PubMed, and science.gov). We followed the (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) PRISMA, which is a standard methodology for systematic reviews and meta-analyses. A total of 56 articles are reviewed based on the combination of a set of selected search terms including RPM, data mining, clinical decision support system, electronic health record, cloud computing, internet of things, and wireless body area network. The result of this study approved the effectiveness of RPM in improving healthcare delivery, increase diagnosis speed, and reduce costs. To this end, we also present the chronic disease monitoring system as a case study to provide enhanced solutions for RPMsThis research work was partially supported by the Sejong University Research Faculty Program (20212023)S

A Survey on Human-aware Robot Navigation

Intelligent systems are increasingly part of our everyday lives and have been integrated seamlessly to the point where it is difficult to imagine a world without them. Physical manifestations of those systems on the other hand, in the form of embodied agents or robots, have so far been used only for specific applications and are often limited to functional roles (e.g. in the industry, entertainment and military fields). Given the current growth and innovation in the research communities concerned with the topics of robot navigation, human-robot-interaction and human activity recognition, it seems like this might soon change. Robots are increasingly easy to obtain and use and the acceptance of them in general is growing. However, the design of a socially compliant robot that can function as a companion needs to take various areas of research into account. This paper is concerned with the navigation aspect of a socially-compliant robot and provides a survey of existing solutions for the relevant areas of research as well as an outlook on possible future directions.Comment: Robotics and Autonomous Systems, 202

Improving Quality of Life: Home Care for Chronically Ill and Elderly People

In this chapter, we propose a system especially created for elderly or chronically ill people that are with special needs and poor familiarity with technology. The system combines home monitoring of physiological and emotional states through a set of wearable sensors, user-controlled (automated) home devices, and a central control for integration of the data, in order to provide a safe and friendly environment according to the limited capabilities of the users. The main objective is to create the easy, low-cost automation of a room or house to provide a friendly environment that enhances the psychological condition of immobilized users. In addition, the complete interaction of the components provides an overview of the physical and emotional state of the user, building a behavior pattern that can be supervised by the care giving staff. This approach allows the integration of physiological signals with the patient’s environmental and social context to obtain a complete framework of the emotional states