A Multi-layer Fpga Framework Supporting Autonomous Runtime Partial Reconfiguration

Partial reconfiguration is a unique capability provided by several Field Programmable Gate Array (FPGA) vendors recently, which involves altering part of the programmed design within an SRAM-based FPGA at run-time. In this dissertation, a Multilayer Runtime Reconfiguration Architecture (MRRA) is developed, evaluated, and refined for Autonomous Runtime Partial Reconfiguration of FPGA devices. Under the proposed MRRA paradigm, FPGA configurations can be manipulated at runtime using on-chip resources. Operations are partitioned into Logic, Translation, and Reconfiguration layers along with a standardized set of Application Programming Interfaces (APIs). At each level, resource details are encapsulated and managed for efficiency and portability during operation. An MRRA mapping theory is developed to link the general logic function and area allocation information to the device related physical configuration level data by using mathematical data structure and physical constraints. In certain scenarios, configuration bit stream data can be read and modified directly for fast operations, relying on the use of similar logic functions and common interconnection resources for communication. A corresponding logic control flow is also developed to make the entire process autonomous. Several prototype MRRA systems are developed on a Xilinx Virtex II Pro platform. The Virtex II Pro on-chip PowerPC core and block RAM are employed to manage control operations while multiple physical interfaces establish and supplement autonomous reconfiguration capabilities. Area, speed and power optimization techniques are developed based on the developed Xilinx prototype. Evaluations and analysis of these prototype and techniques are performed on a number of benchmark and hashing algorithm case studies. The results indicate that based on a variety of test benches, up to 70% reduction in the resource utilization, up to 50% improvement in power consumption, and up to 10 times increase in run-time performance are achieved using the developed architecture and approaches compared with Xilinx baseline reconfiguration flow. Finally, a Genetic Algorithm (GA) for a FPGA fault tolerance case study is evaluated as a ultimate high-level application running on this architecture. It demonstrated that this is a hardware and software infrastructure that enables an FPGA to dynamically reconfigure itself efficiently under the control of a soft microprocessor core that is instantiated within the FPGA fabric. Such a system contributes to the observed benefits of intelligent control, fast reconfiguration, and low overhead

A control and management architecture supporting autonomic NFV services

The proposed control, orchestration and management (COM) architecture is presented from a high-level point of view; it enables the dynamic provisioning of services such as network data connectivity or generic network slicing instances based on virtual network functions (VNF). The COM is based on Software Defined Networking (SDN) principles and is hierarchical, with a dedicated controller per technology domain. Along with the SDN control plane for the provisioning of connectivity, an ETSI NFV management and orchestration system is responsible for the instantiation of Network Services, understood in this context as interconnected VNFs. A key, novel component of the COM architecture is the monitoring and data analytics (MDA) system, able to collect monitoring data from the network, datacenters and applications which outputs can be used to proactively reconfigure resources thus adapting to future conditions, like load or degradations. To illustrate the COM architecture, a use case of a Content Delivery Network service taking advantage of the MDA ability to collect and deliver monitoring data is experimentally demonstrated.Peer ReviewedPostprint (author's final draft

Distributed collaborative knowledge management for optical network

Network automation has been long time envisioned. In fact, the Telecommunications Management Network (TMN), defined by the International Telecommunication Union (ITU), is a hierarchy of management layers (network element, network, service, and business management), where high-level operational goals propagate from upper to lower layers. The network management architecture has evolved with the development of the Software Defined Networking (SDN) concept that brings programmability to simplify configuration (it breaks down high-level service abstraction into lower-level device abstractions), orchestrates operation, and automatically reacts to changes or events. Besides, the development and deployment of solutions based on Artificial Intelligence (AI) and Machine Learning (ML) for making decisions (control loop) based on the collected monitoring data enables network automation, which targets at reducing operational costs. AI/ML approaches usually require large datasets for training purposes, which are difficult to obtain. The lack of data can be compensated with a collective self-learning approach. In this thesis, we go beyond the aforementioned traditional control loop to achieve an efficient knowledge management (KM) process that enhances network intelligence while bringing down complexity. In this PhD thesis, we propose a general architecture to support KM process based on four main pillars, which enable creating, sharing, assimilating and using knowledge. Next, two alternative strategies based on model inaccuracies and combining model are proposed. To highlight the capacity of KM to adapt to different applications, two use cases are considered to implement KM in a purely centralized and distributed optical network architecture. Along with them, various policies are considered for evaluating KM in data- and model- based strategies. The results target to minimize the amount of data that need to be shared and reduce the convergence error. We apply KM to multilayer networks and propose the PILOT methodology for modeling connectivity services in a sandbox domain. PILOT uses active probes deployed in Central Offices (COs) to obtain real measurements that are used to tune a simulation scenario reproducing the real deployment with high accuracy. A simulator is eventually used to generate large amounts of realistic synthetic data for ML training and validation. We apply KM process also to a more complex network system that consists of several domains, where intra-domain controllers assist a broker plane in estimating accurate inter-domain delay. In addition, the broker identifies and corrects intra-domain model inaccuracies, as well as it computes an accurate compound model. Such models can be used for quality of service (QoS) and accurate end-to-end delay estimations. Finally, we investigate the application on KM in the context of Intent-based Networking (IBN). Knowledge in terms of traffic model and/or traffic perturbation is transferred among agents in a hierarchical architecture. This architecture can support autonomous network operation, like capacity management.La automatización de la red se ha concebido desde hace mucho tiempo. De hecho, la red de gestión de telecomunicaciones (TMN), definida por la Unión Internacional de Telecomunicaciones (ITU), es una jerarquía de capas de gestión (elemento de red, red, servicio y gestión de negocio), donde los objetivos operativos de alto nivel se propagan desde las capas superiores a las inferiores. La arquitectura de gestión de red ha evolucionado con el desarrollo del concepto de redes definidas por software (SDN) que brinda capacidad de programación para simplificar la configuración (descompone la abstracción de servicios de alto nivel en abstracciones de dispositivos de nivel inferior), organiza la operación y reacciona automáticamente a los cambios o eventos. Además, el desarrollo y despliegue de soluciones basadas en inteligencia artificial (IA) y aprendizaje automático (ML) para la toma de decisiones (bucle de control) en base a los datos de monitorización recopilados permite la automatización de la red, que tiene como objetivo reducir costes operativos. AI/ML generalmente requieren un gran conjunto de datos para entrenamiento, los cuales son difíciles de obtener. La falta de datos se puede compensar con un enfoque de autoaprendizaje colectivo. En esta tesis, vamos más allá del bucle de control tradicional antes mencionado para lograr un proceso eficiente de gestión del conocimiento (KM) que mejora la inteligencia de la red al tiempo que reduce la complejidad. En esta tesis doctoral, proponemos una arquitectura general para apoyar el proceso de KM basada en cuatro pilares principales que permiten crear, compartir, asimilar y utilizar el conocimiento. A continuación, se proponen dos estrategias alternativas basadas en inexactitudes del modelo y modelo de combinación. Para resaltar la capacidad de KM para adaptarse a diferentes aplicaciones, se consideran dos casos de uso para implementar KM en una arquitectura de red óptica puramente centralizada y distribuida. Junto a ellos, se consideran diversas políticas para evaluar KM en estrategias basadas en datos y modelos. Los resultados apuntan a minimizar la cantidad de datos que deben compartirse y reducir el error de convergencia. Aplicamos KM a redes multicapa y proponemos la metodología PILOT para modelar servicios de conectividad en un entorno aislado. PILOT utiliza sondas activas desplegadas en centrales de telecomunicación (CO) para obtener medidas reales que se utilizan para ajustar un escenario de simulación que reproducen un despliegue real con alta precisión. Un simulador se utiliza finalmente para generar grandes cantidades de datos sintéticos realistas para el entrenamiento y la validación de ML. Aplicamos el proceso de KM también a un sistema de red más complejo que consta de varios dominios, donde los controladores intra-dominio ayudan a un plano de bróker a estimar el retardo entre dominios de forma precisa. Además, el bróker identifica y corrige las inexactitudes de los modelos intra-dominio, así como también calcula un modelo compuesto preciso. Estos modelos se pueden utilizar para estimar la calidad de servicio (QoS) y el retardo extremo a extremo de forma precisa. Finalmente, investigamos la aplicación en KM en el contexto de red basada en intención (IBN). El conocimiento en términos de modelo de tráfico y/o perturbación del tráfico se transfiere entre agentes en una arquitectura jerárquica. Esta arquitectura puede soportar el funcionamiento autónomo de la red, como la gestión de la capacidad.Postprint (published version

An Adaptive Modular Redundancy Technique to Self-regulate Availability, Area, and Energy Consumption in Mission-critical Applications

As reconfigurable devices\u27 capacities and the complexity of applications that use them increase, the need for self-reliance of deployed systems becomes increasingly prominent. A Sustainable Modular Adaptive Redundancy Technique (SMART) composed of a dual-layered organic system is proposed, analyzed, implemented, and experimentally evaluated. SMART relies upon a variety of self-regulating properties to control availability, energy consumption, and area used, in dynamically-changing environments that require high degree of adaptation. The hardware layer is implemented on a Xilinx Virtex-4 Field Programmable Gate Array (FPGA) to provide self-repair using a novel approach called a Reconfigurable Adaptive Redundancy System (RARS). The software layer supervises the organic activities within the FPGA and extends the self-healing capabilities through application-independent, intrinsic, evolutionary repair techniques to leverage the benefits of dynamic Partial Reconfiguration (PR). A SMART prototype is evaluated using a Sobel edge detection application. This prototype is shown to provide sustainability for stressful occurrences of transient and permanent fault injection procedures while still reducing energy consumption and area requirements. An Organic Genetic Algorithm (OGA) technique is shown capable of consistently repairing hard faults while maintaining correct edge detector outputs, by exploiting spatial redundancy in the reconfigurable hardware. A Monte Carlo driven Continuous Markov Time Chains (CTMC) simulation is conducted to compare SMART\u27s availability to industry-standard Triple Modular Technique (TMR) techniques. Based on nine use cases, parameterized with realistic fault and repair rates acquired from publically available sources, the results indicate that availability is significantly enhanced by the adoption of fast repair techniques targeting aging-related hard-faults. Under harsh environments, SMART is shown to improve system availability from 36.02% with lengthy repair techniques to 98.84% with fast ones. This value increases to five nines (99.9998%) under relatively more favorable conditions. Lastly, SMART is compared to twenty eight standard TMR benchmarks that are generated by the widely-accepted BL-TMR tools. Results show that in seven out of nine use cases, SMART is the recommended technique, with power savings ranging from 22% to 29%, and area savings ranging from 17% to 24%, while still maintaining the same level of availability

Autonomously Reconfigurable Artificial Neural Network on a Chip

Artificial neural network (ANN), an established bio-inspired computing paradigm, has proved very effective in a variety of real-world problems and particularly useful for various emerging biomedical applications using specialized ANN hardware. Unfortunately, these ANN-based systems are increasingly vulnerable to both transient and permanent faults due to unrelenting advances in CMOS technology scaling, which sometimes can be catastrophic. The considerable resource and energy consumption and the lack of dynamic adaptability make conventional fault-tolerant techniques unsuitable for future portable medical solutions. Inspired by the self-healing and self-recovery mechanisms of human nervous system, this research seeks to address reliability issues of ANN-based hardware by proposing an Autonomously Reconfigurable Artificial Neural Network (ARANN) architectural framework. Leveraging the homogeneous structural characteristics of neural networks, ARANN is capable of adapting its structures and operations, both algorithmically and microarchitecturally, to react to unexpected neuron failures. Specifically, we propose three key techniques --- Distributed ANN, Decoupled Virtual-to-Physical Neuron Mapping, and Dual-Layer Synchronization --- to achieve cost-effective structural adaptation and ensure accurate system recovery. Moreover, an ARANN-enabled self-optimizing workflow is presented to adaptively explore a "Pareto-optimal" neural network structure for a given application, on the fly. Implemented and demonstrated on a Virtex-5 FPGA, ARANN can cover and adapt 93% chip area (neurons) with less than 1% chip overhead and O(n) reconfiguration latency. A detailed performance analysis has been completed based on various recovery scenarios

Towards cognitive in-operation network planning

Next-generation internet services such as live TV and video on demand require high bandwidth and ultra-low latency. The ever-increasing volume, dynamicity and stringent requirements of these services’ demands are generating new challenges to nowadays telecom networks. To decrease expenses, service-layer content providers are delivering their content near the end users, thus allowing a low latency and tailored content delivery. As a consequence of this, unseen metro and even core traffic dynamicity is arising with changes in the volume and direction of the traffic along the day. A tremendous effort to efficiently manage networks is currently ongoing towards the realisation of 5G networks. This translates in looking for network architectures supporting dynamic resource allocation, fulfilling strict service requirements and minimising the total cost of ownership (TCO). In this regard, in-operation network planning was recently proven to successfully support various network reconfiguration use cases in prospective scenarios. Nevertheless, additional research to extend in-operation planning capabilities from typical reactive optimization schemes to proactive and predictive schemes based on the analysis of network monitoring data is required. A hot topic raising increasing attention is cognitive networking, where an elevated knowledge about the network could be obtained as a result of introducing data analytics in the telecom operator’s infrastructure. By using predictive knowledge about the network traffic, in-operation network planning mechanisms could be enhanced to efficiently adapt the network by means of future traffic prediction, thus achieving cognitive in-operation network planning. In this thesis, we focus on studying mechanisms to enable cognitive in-operation network planning in core networks. In particular, we focus on dynamically reconfiguring virtual network topologies (VNT) at the MPLS layer, covering a number of detailed objectives. First, we start studying mechanisms to allow network traffic flow modelling, from monitoring and data transformation to the estimation of predictive traffic model based on this data. By means of these traffic models, then we tackle a cognitive approach to periodically adapt the core VNT to current and future traffic, using predicted traffic matrices based on origin-destination (OD) predictive models. This optimization approach, named VENTURE, is efficiently solved using dedicated heuristic algorithms and its feasibility is demonstrated in an experimental in-operation network planning environment. Finally, we extend VENTURE to consider core flows dynamicity as a result of metro flows re-routing, which represents a meaningful dynamic traffic scenario. This extension, which entails enhancements to coordinate metro and core network controllers with the aim of allowing fast adaption of core OD traffic models, is evaluated and validated in terms of traffic models accuracy and experimental feasibility.Els serveis d’internet de nova generació tals com la televisió en viu o el vídeo sota demanda requereixen d’un gran ample de banda i d’ultra-baixa latència. L’increment continu del volum, dinamicitat i requeriments d’aquests serveis està generant nous reptes pels teleoperadors de xarxa. Per reduir costs, els proveïdors de contingut estan disposant aquests més a prop dels usuaris finals, aconseguint així una entrega de contingut feta a mida. Conseqüentment, estem presenciant una dinamicitat mai vista en el tràfic de xarxes de metro amb canvis en la direcció i el volum del tràfic al llarg del dia. Actualment, s’està duent a terme un gran esforç cap a la realització de xarxes 5G. Aquest esforç es tradueix en cercar noves arquitectures de xarxa que suportin l’assignació dinàmica de recursos, complint requeriments de servei estrictes i minimitzant el cost total de la propietat. En aquest sentit, recentment s’ha demostrat com l’aplicació de “in-operation network planning” permet exitosament suportar diversos casos d’ús de reconfiguració de xarxa en escenaris prospectius. No obstant, és necessari dur a terme més recerca per tal d’estendre “in-operation network planning” des d’un esquema reactiu d’optimització cap a un nou esquema proactiu basat en l’analítica de dades provinents del monitoritzat de la xarxa. El concepte de xarxes cognitives es també troba al centre d’atenció, on un elevat coneixement de la xarxa s’obtindria com a resultat d’introduir analítica de dades en la infraestructura del teleoperador. Mitjançant un coneixement predictiu sobre el tràfic de xarxa, els mecanismes de in-operation network planning es podrien millorar per adaptar la xarxa eficientment basant-se en predicció de tràfic, assolint així el que anomenem com a “cognitive in-operation network Planning”. En aquesta tesi ens centrem en l’estudi de mecanismes que permetin establir “el cognitive in-operation network Planning” en xarxes de core. En particular, ens centrem en reconfigurar dinàmicament topologies de xarxa virtual (VNT) a la capa MPLS, cobrint una sèrie d’objectius detallats. Primer comencem estudiant mecanismes pel modelat de fluxos de tràfic de xarxa, des del seu monitoritzat i transformació fins a l’estimació de models predictius de tràfic. Posteriorment, i mitjançant aquests models predictius, tractem un esquema cognitiu per adaptar periòdicament la VNT utilitzant matrius de tràfic basades en predicció de parells origen-destí (OD). Aquesta optimització, anomenada VENTURE, és resolta eficientment fent servir heurístiques dedicades i és posteriorment avaluada sota escenaris de tràfic de xarxa dinàmics. A continuació, estenem VENTURE considerant la dinamicitat dels fluxos de tràfic de xarxes de metro, el qual representa un escenari rellevant de dinamicitat de tràfic. Aquesta extensió involucra millores per coordinar els operadors de metro i core amb l’objectiu d’aconseguir una ràpida adaptació de models de tràfic OD. Finalment, proposem dues arquitectures de xarxa necessàries per aplicar els mecanismes anteriors en entorns experimentals, emprant protocols estat-de-l’art com són OpenFlow i IPFIX. La metodologia emprada per avaluar el treball anterior consisteix en una primera avaluació numèrica fent servir un simulador de xarxes íntegrament dissenyat i desenvolupat per a aquesta tesi. Després d’aquesta validació basada en simulació, la factibilitat experimental de les arquitectures de xarxa proposades és avaluada en un entorn de proves distribuït

Towards cognitive in-operation network planning

Next-generation internet services such as live TV and video on demand require high bandwidth and ultra-low latency. The ever-increasing volume, dynamicity and stringent requirements of these services’ demands are generating new challenges to nowadays telecom networks. To decrease expenses, service-layer content providers are delivering their content near the end users, thus allowing a low latency and tailored content delivery. As a consequence of this, unseen metro and even core traffic dynamicity is arising with changes in the volume and direction of the traffic along the day. A tremendous effort to efficiently manage networks is currently ongoing towards the realisation of 5G networks. This translates in looking for network architectures supporting dynamic resource allocation, fulfilling strict service requirements and minimising the total cost of ownership (TCO). In this regard, in-operation network planning was recently proven to successfully support various network reconfiguration use cases in prospective scenarios. Nevertheless, additional research to extend in-operation planning capabilities from typical reactive optimization schemes to proactive and predictive schemes based on the analysis of network monitoring data is required. A hot topic raising increasing attention is cognitive networking, where an elevated knowledge about the network could be obtained as a result of introducing data analytics in the telecom operator’s infrastructure. By using predictive knowledge about the network traffic, in-operation network planning mechanisms could be enhanced to efficiently adapt the network by means of future traffic prediction, thus achieving cognitive in-operation network planning. In this thesis, we focus on studying mechanisms to enable cognitive in-operation network planning in core networks. In particular, we focus on dynamically reconfiguring virtual network topologies (VNT) at the MPLS layer, covering a number of detailed objectives. First, we start studying mechanisms to allow network traffic flow modelling, from monitoring and data transformation to the estimation of predictive traffic model based on this data. By means of these traffic models, then we tackle a cognitive approach to periodically adapt the core VNT to current and future traffic, using predicted traffic matrices based on origin-destination (OD) predictive models. This optimization approach, named VENTURE, is efficiently solved using dedicated heuristic algorithms and its feasibility is demonstrated in an experimental in-operation network planning environment. Finally, we extend VENTURE to consider core flows dynamicity as a result of metro flows re-routing, which represents a meaningful dynamic traffic scenario. This extension, which entails enhancements to coordinate metro and core network controllers with the aim of allowing fast adaption of core OD traffic models, is evaluated and validated in terms of traffic models accuracy and experimental feasibility.Els serveis d’internet de nova generació tals com la televisió en viu o el vídeo sota demanda requereixen d’un gran ample de banda i d’ultra-baixa latència. L’increment continu del volum, dinamicitat i requeriments d’aquests serveis està generant nous reptes pels teleoperadors de xarxa. Per reduir costs, els proveïdors de contingut estan disposant aquests més a prop dels usuaris finals, aconseguint així una entrega de contingut feta a mida. Conseqüentment, estem presenciant una dinamicitat mai vista en el tràfic de xarxes de metro amb canvis en la direcció i el volum del tràfic al llarg del dia. Actualment, s’està duent a terme un gran esforç cap a la realització de xarxes 5G. Aquest esforç es tradueix en cercar noves arquitectures de xarxa que suportin l’assignació dinàmica de recursos, complint requeriments de servei estrictes i minimitzant el cost total de la propietat. En aquest sentit, recentment s’ha demostrat com l’aplicació de “in-operation network planning” permet exitosament suportar diversos casos d’ús de reconfiguració de xarxa en escenaris prospectius. No obstant, és necessari dur a terme més recerca per tal d’estendre “in-operation network planning” des d’un esquema reactiu d’optimització cap a un nou esquema proactiu basat en l’analítica de dades provinents del monitoritzat de la xarxa. El concepte de xarxes cognitives es també troba al centre d’atenció, on un elevat coneixement de la xarxa s’obtindria com a resultat d’introduir analítica de dades en la infraestructura del teleoperador. Mitjançant un coneixement predictiu sobre el tràfic de xarxa, els mecanismes de in-operation network planning es podrien millorar per adaptar la xarxa eficientment basant-se en predicció de tràfic, assolint així el que anomenem com a “cognitive in-operation network Planning”. En aquesta tesi ens centrem en l’estudi de mecanismes que permetin establir “el cognitive in-operation network Planning” en xarxes de core. En particular, ens centrem en reconfigurar dinàmicament topologies de xarxa virtual (VNT) a la capa MPLS, cobrint una sèrie d’objectius detallats. Primer comencem estudiant mecanismes pel modelat de fluxos de tràfic de xarxa, des del seu monitoritzat i transformació fins a l’estimació de models predictius de tràfic. Posteriorment, i mitjançant aquests models predictius, tractem un esquema cognitiu per adaptar periòdicament la VNT utilitzant matrius de tràfic basades en predicció de parells origen-destí (OD). Aquesta optimització, anomenada VENTURE, és resolta eficientment fent servir heurístiques dedicades i és posteriorment avaluada sota escenaris de tràfic de xarxa dinàmics. A continuació, estenem VENTURE considerant la dinamicitat dels fluxos de tràfic de xarxes de metro, el qual representa un escenari rellevant de dinamicitat de tràfic. Aquesta extensió involucra millores per coordinar els operadors de metro i core amb l’objectiu d’aconseguir una ràpida adaptació de models de tràfic OD. Finalment, proposem dues arquitectures de xarxa necessàries per aplicar els mecanismes anteriors en entorns experimentals, emprant protocols estat-de-l’art com són OpenFlow i IPFIX. La metodologia emprada per avaluar el treball anterior consisteix en una primera avaluació numèrica fent servir un simulador de xarxes íntegrament dissenyat i desenvolupat per a aquesta tesi. Després d’aquesta validació basada en simulació, la factibilitat experimental de les arquitectures de xarxa proposades és avaluada en un entorn de proves distribuït.Postprint (published version

Autonomous and reliable operation of multilayer optical networks

This Ph.D. thesis focuses on the reliable autonomous operation of multilayer optical networks. The first objective focuses on the reliability of the optical network and proposes methods for health analysis related to Quality of Transmission (QoT) degradation. Such degradation is produced by soft-failures in optical devices and fibers in core and metro segments of the operators’ transport networks. Here, we compare estimated and measured QoT in the optical transponder by using a QoT tool based on GNPy. We show that the changes in the values of input parameters of the QoT model representing optical devices can explain the deviations and degradation in performance of such devices. We use reverse engineering to estimate the value of those parameters that explain the observed QoT. We show by simulation a large anticipation in soft-failure detection, localization and identification of degradation before affecting the network. Finally, for validating our approach, we experimentally observe the high accuracy in the estimation of the modeling parameters. The second objective focuses on multilayer optical networks, where lightpaths are used to connect packet nodes thus creating virtual links (vLink). Specifically, we study how lightpaths can be managed to provide enough capacity to the packet layer without detrimental effects in their Quality of Service (QoS), like added delays or packet losses, and at the same time minimize energy consumption. Such management must be as autonomous as possible to minimize human intervention. We study the autonomous operation of optical connections based on digital subcarrier multiplexing (DSCM). We propose several solutions for the autonomous operation of DSCM systems. In particular, the combination of two modules running in the optical node and in the optical transponder activate and deactivate subcarriers to adapt the capacity of the optical connection to the upper layer packet traffic. The module running in the optical node is part of our Intent-based Networking (IBN) solution and implements prediction to anticipate traffic changes. Our comprehensive study demonstrates the feasibility of DSCM autonomous operation and shows large cost savings in terms of energy consumption. In addition, our study provides a guideline to help vendors and operators to adopt the proposed solutions. The final objective targets at automating packet layer connections (PkC). Automating the capacity required by PkCs can bring further cost reduction to network operators, as it can limit the resources used at the optical layer. However, such automation requires careful design to avoid any QoS degradation, which would impact Service Level Agreement (SLA) in the case that the packet flow is related to some customer connection. We study autonomous packet flow capacity management. We apply RL techniques and propose a management lifecycle consisting of three different phases: 1) a self-tuned threshold-based approach for setting up the connection until enough data is collected, which enables understanding the traffic characteristics; 2) RL operation based on models pre-trained with generic traffic profiles; and 3) RL operation based on models trained with the observed traffic. We show that RL algorithms provide poor performance until they learn optimal policies, as well as when the traffic characteristics change over time. The proposed lifecycle provides remarkable performance from the starting of the connection and it shows the robustness while facing changes in traffic. The contribution is twofold: 1) and on the one hand, we propose a solution based on RL, which shows superior performance with respect to the solution based on prediction; and 2) because vLinks support packet connections, coordination between the intents of both layers is proposed. In this case, the actions taken by the individual PkCs are used by the vLink intent. The results show noticeable performance compared to independent vLink operation.Esta tesis doctoral se centra en la operación autónoma y confiable de redes ópticas multicapa. El primer objetivo se centra en la fiabilidad de la red óptica y propone métodos para el análisis del estado relacionados con la degradación de la calidad de la transmisión (QoT). Dicha degradación se produce por fallos en dispositivos ópticos y fibras en las redes de transporte de los operadores que no causan el corte de la señal. Comparamos el QoT estimado y medido en el transpondedor óptico mediante el uso de una herramienta de QoT basada en GNPy. Mostramos que los cambios en los valores de los parámetros de entrada del modelo QoT que representan los dispositivos ópticos pueden explicar las desviaciones y la degradación en el rendimiento de dichos dispositivos. Usamos ingeniería inversa para estimar el valor de aquellos parámetros que explican el QoT observado. Mostramos, mediante simulación, una gran anticipación en la detección, localización e identificación de fallas leves antes de afectar la red. Finalmente, validamos nuestro método de forma experimental y comprobamos la alta precisión en la estimación de los parámetros de los modelos. El segundo objetivo se centra en las redes ópticas multicapa, donde se utilizan conexiones ópticas (lightpaths) para conectar nodos de paquetes creando así enlaces virtuales (vLink). Específicamente, estudiamos cómo se pueden gestionar los lightpaths para proporcionar suficiente capacidad a la capa de paquetes sin efectos perjudiciales en su calidad de servicio (QoS), como retrasos adicionales o pérdidas de paquetes, y al mismo tiempo minimizar el consumo de energía. Estudiamos el funcionamiento autónomo de conexiones ópticas basadas en multiplexación de subportadoras digitales (DSCM) y proponemos soluciones para su funcionamiento autónomo. En particular, la combinación de dos módulos que se ejecutan en el nodo óptico y en el transpondedor óptico activan y desactivan subportadoras para adaptar la capacidad de la conexión óptica al tráfico de paquetes. El módulo que se ejecuta en el nodo óptico implementa la predicción para anticipar los cambios de tráfico. Nuestro estudio demuestra la viabilidad de la operación autónoma de DSCM y muestra un gran ahorro de consumo de energía. El objetivo final es la automatización de conexiones de capa de paquete (PkC). La automatización de la capacidad requerida por las PkC puede generar una mayor reducción de costes, ya que puede limitar los recursos utilizados en la capa óptica. Sin embargo, dicha automatización requiere un diseño cuidadoso para evitar cualquier degradación de QoS, lo que afectaría acuerdos de nivel de servicio (SLA) en el caso de que el flujo de paquetes esté relacionado con alguna conexión del cliente. Estudiamos la gestión autónoma de la capacidad del flujo de paquetes. Aplicamos RL y proponemos un ciclo de vida de gestión con tres fases: 1) un enfoque basado en umbrales auto ajustados para configurar la conexión hasta que se recopilen suficientes datos, lo que permite comprender las características del tráfico; 2) operación RL basada en modelos pre-entrenados con perfiles de tráfico genéricos; y 3) operación de RL en base a modelos entrenados con el tránsito observado. Mostramos que los algoritmos de RL ofrecen un desempeño deficiente hasta que aprenden las políticas óptimas, así cuando las características del tráfico cambian con el tiempo. El ciclo de vida propuesto proporciona un rendimiento notable desde el inicio de la conexión y muestra la robustez frente a cambios en el tráfico. La contribución es doble: 1) proponemos una solución basada en RL que muestra un rendimiento superior que la solución basada en predicción; y 2) debido a que los vLinks admiten conexiones de paquetes, se propone la coordinación entre las intenciones de ambas capas. En este caso, la intención de vLink utiliza las acciones realizadas por los PkC individuales. Los resultados muestran un rendimiento notable en comparación con la operación independiente de vLink.Postprint (published version

Autonomous Recovery Of Reconfigurable Logic Devices Using Priority Escalation Of Slack

Field Programmable Gate Array (FPGA) devices offer a suitable platform for survivable hardware architectures in mission-critical systems. In this dissertation, active dynamic redundancy-based fault-handling techniques are proposed which exploit the dynamic partial reconfiguration capability of SRAM-based FPGAs. Self-adaptation is realized by employing reconfiguration in detection, diagnosis, and recovery phases. To extend these concepts to semiconductor aging and process variation in the deep submicron era, resilient adaptable processing systems are sought to maintain quality and throughput requirements despite the vulnerabilities of the underlying computational devices. A new approach to autonomous fault-handling which addresses these goals is developed using only a uniplex hardware arrangement. It operates by observing a health metric to achieve Fault Demotion using Recon- figurable Slack (FaDReS). Here an autonomous fault isolation scheme is employed which neither requires test vectors nor suspends the computational throughput, but instead observes the value of a health metric based on runtime input. The deterministic flow of the fault isolation scheme guarantees success in a bounded number of reconfigurations of the FPGA fabric. FaDReS is then extended to the Priority Using Resource Escalation (PURE) online redundancy scheme which considers fault-isolation latency and throughput trade-offs under a dynamic spare arrangement. While deep-submicron designs introduce new challenges, use of adaptive techniques are seen to provide several promising avenues for improving resilience. The scheme developed is demonstrated by hardware design of various signal processing circuits and their implementation on a Xilinx Virtex-4 FPGA device. These include a Discrete Cosine Transform (DCT) core, Motion Estimation (ME) engine, Finite Impulse Response (FIR) Filter, Support Vector Machine (SVM), and Advanced Encryption Standard (AES) blocks in addition to MCNC benchmark circuits. A iii significant reduction in power consumption is achieved ranging from 83% for low motion-activity scenes to 12.5% for high motion activity video scenes in a novel ME engine configuration. For a typical benchmark video sequence, PURE is shown to maintain a PSNR baseline near 32dB. The diagnosability, reconfiguration latency, and resource overhead of each approach is analyzed. Compared to previous alternatives, PURE maintains a PSNR within a difference of 4.02dB to 6.67dB from the fault-free baseline by escalating healthy resources to higher-priority signal processing functions. The results indicate the benefits of priority-aware resiliency over conventional redundancy approaches in terms of fault-recovery, power consumption, and resource-area requirements. Together, these provide a broad range of strategies to achieve autonomous recovery of reconfigurable logic devices under a variety of constraints, operating conditions, and optimization criteria