Optimization of the interoperability and dynamic spectrum management in mobile communications systems beyond 3G

The future wireless ecosystem will heterogeneously integrate a number of overlapped Radio Access Technologies (RATs) through a common platform. A major challenge arising from the heterogeneous network is the Radio Resource Management (RRM) strategy. A Common RRM (CRRM) module is needed in order to provide a step toward network convergence. This work aims at implementing HSDPA and IEEE 802.11e CRRM evaluation tools. Innovative enhancements to IEEE 802.11e have been pursued on the application of cross-layer signaling to improve Quality of Service (QoS) delivery, and provide more efficient usage of radio resources by adapting such parameters as arbitrary interframe spacing, a differentiated backoff procedure and transmission opportunities, as well as acknowledgment policies (where the most advised block size was found to be 12). Besides, the proposed cross-layer algorithm dynamically changes the size of the Arbitration Interframe Space (AIFS) and the Contention Window (CW) duration according to a periodically obtained fairness measure based on the Signal to Interference-plus-Noise Ratio (SINR) and transmission time, a delay constraint and the collision rate of a given machine. The throughput was increased in 2 Mb/s for all the values of the load that have been tested whilst satisfying more users than with the original standard. For the ad hoc mode an analytical model was proposed that allows for investigating collision free communications in a distributed environment. The addition of extra frequency spectrum bands and an integrated CRRM that enables spectrum aggregation was also addressed. RAT selection algorithms allow for determining the gains obtained by using WiFi as a backup network for HSDPA. The proposed RAT selection algorithm is based on the load of each system, without the need for a complex management system. Simulation results show that, in such scenario, for high system loads, exploiting localization while applying load suitability optimization based algorithm, can provide a marginal gain of up to 450 kb/s in the goodput. HSDPA was also studied in the context of cognitive radio, by considering two co-located BSs operating at different frequencies (in the 2 and 5 GHz bands) in the same cell. The system automatically chooses the frequency to serve each user with an optimal General Multi-Band Scheduling (GMBS) algorithm. It was shown that enabling the access to a secondary band, by using the proposed Integrated CRRM (iCRRM), an almost constant gain near 30 % was obtained in the throughput with the proposed optimal solution, compared to a system where users are first allocated in one of the two bands and later not able to handover between the bands. In this context, future cognitive radio scenarios where IEEE 802.11e ad hoc modes will be essential for giving access to the mobile users have been proposed

Final report on the evaluation of RRM/CRRM algorithms

Deliverable public del projecte EVERESTThis deliverable provides a definition and a complete evaluation of the RRM/CRRM algorithms selected in D11 and D15, and evolved and refined on an iterative process. The evaluation will be carried out by means of simulations using the simulators provided at D07, and D14.Preprin

Application priority framework for fixed mobile converged communication networks

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.The current prospects in wired and wireless access networks, it is becoming increasingly important to address potential convergence in order to offer integrated broadband services. These systems will need to offer higher data transmission capacities and long battery life, which is the catalyst for an everincreasing variety of air interface technologies targeting local area to wide area connectivity. Current integrated industrial networks do not offer application aware context delivery and enhanced services for optimised networks. Application aware services provide value-added functionality to business applications by capturing, integrating, and consolidating intelligence about users and their endpoint devices from various points in the network. This thesis mainly intends to resolve the issues related to ubiquitous application aware service, fair allocation of radio access, reduced energy consumption and improved capacity. A technique that measures and evaluates the data rate demand to reduce application response time and queuing delay for multi radio interfaces is proposed. The technique overcomes the challenges of network integration, requiring no user intervention, saving battery life and selecting the radio access connection for the application requested by the end user. This study is split in two parts. The first contribution identifies some constraints of the services towards the application layer in terms of e.g. data rate and signal strength. The objectives are achieved by application controlled handover (ACH) mechanism in order to maintain acceptable data rate for real-time application services. It also looks into the impact of the radio link on the application and identifies elements and parameters like wireless link quality and handover that will influence the application type. It also identifies some enhanced traditional mechanisms such as distance controlled multihop and mesh topology required in order to support energy efficient multimedia applications. The second contribution unfolds an intelligent application priority assignment mechanism (IAPAM) for medical applications using wireless sensor networks. IAPAM proposes and evaluates a technique based on prioritising multiple virtual queues for the critical nature of medical data to improve instant transmission. Various mobility patterns (directed, controlled and random waypoint) has been investigated and compared by simulating IAPAM enabled mobile BWSN. The following topics have been studied, modelled, simulated and discussed in this thesis: 1. Application Controlled Handover (ACH) for multi radios over fibre 2. Power Controlled Scheme for mesh multi radios over fibre using ACH 3. IAPAM for Biomedical Wireless Sensor Networks (BWSN) and impact of mobility over IAPAM enabled BWSN. Extensive simulation studies are performed to analyze and to evaluate the proposed techniques. Simulation results demonstrate significant improvements in multi radios over fibre performance in terms of application response delay and power consumption by upto 75% and 15 % respectively, reduction in traffic loss by upto 53% and reduction in delay for real time application by more than 25% in some cases

Quality of service differentiation for multimedia delivery in wireless LANs

Delivering multimedia content to heterogeneous devices over a variable networking environment while maintaining high quality levels involves many technical challenges. The research reported in this thesis presents a solution for Quality of Service (QoS)-based service differentiation when delivering multimedia content over the wireless LANs. This thesis has three major contributions outlined below: 1. A Model-based Bandwidth Estimation algorithm (MBE), which estimates the available bandwidth based on novel TCP and UDP throughput models over IEEE 802.11 WLANs. MBE has been modelled, implemented, and tested through simulations and real life testing. In comparison with other bandwidth estimation techniques, MBE shows better performance in terms of error rate, overhead, and loss. 2. An intelligent Prioritized Adaptive Scheme (iPAS), which provides QoS service differentiation for multimedia delivery in wireless networks. iPAS assigns dynamic priorities to various streams and determines their bandwidth share by employing a probabilistic approach-which makes use of stereotypes. The total bandwidth to be allocated is estimated using MBE. The priority level of individual stream is variable and dependent on stream-related characteristics and delivery QoS parameters. iPAS can be deployed seamlessly over the original IEEE 802.11 protocols and can be included in the IEEE 802.21 framework in order to optimize the control signal communication. iPAS has been modelled, implemented, and evaluated via simulations. The results demonstrate that iPAS achieves better performance than the equal channel access mechanism over IEEE 802.11 DCF and a service differentiation scheme on top of IEEE 802.11e EDCA, in terms of fairness, throughput, delay, loss, and estimated PSNR. Additionally, both objective and subjective video quality assessment have been performed using a prototype system. 3. A QoS-based Downlink/Uplink Fairness Scheme, which uses the stereotypes-based structure to balance the QoS parameters (i.e. throughput, delay, and loss) between downlink and uplink VoIP traffic. The proposed scheme has been modelled and tested through simulations. The results show that, in comparison with other downlink/uplink fairness-oriented solutions, the proposed scheme performs better in terms of VoIP capacity and fairness level between downlink and uplink traffic

Adaptive scheduling in cellular access, wireless mesh and IP networks

Networking scenarios in the future will be complex and will include fixed networks and hybrid Fourth Generation (4G) networks, consisting of both infrastructure-based and infrastructureless, wireless parts. In such scenarios, adaptive provisioning and management of network resources becomes of critical importance. Adaptive mechanisms are desirable since they enable a self-configurable network that is able to adjust itself to varying traffic and channel conditions. The operation of adaptive mechanisms is heavily based on measurements. The aim of this thesis is to investigate how measurement based, adaptive packet scheduling algorithms can be utilized in different networking environments. The first part of this thesis is a proposal for a new delay-based scheduling algorithm, known as Delay-Bounded Hybrid Proportional Delay (DBHPD), for delay adaptive provisioning in DiffServ-based fixed IP networks. This DBHPD algorithm is thoroughly evaluated by ns2-simulations and measurements in a FreeBSD prototype router network. It is shown that DBHPD results in considerably more controllable differentiation than basic static bandwidth sharing algorithms. The prototype router measurements also prove that a DBHPD algorithm can be easily implemented in practice, causing less processing overheads than a well known CBQ algorithm. The second part of this thesis discusses specific scheduling requirements set by hybrid 4G networking scenarios. Firstly, methods for joint scheduling and transmit beamforming in 3.9G or 4G networks are described and quantitatively analyzed using statistical methods. The analysis reveals that the combined gain of channel-adaptive scheduling and transmit beamforming is substantial and that an On-off strategy can achieve the performance of an ideal Max SNR strategy if the feedback threshold is optimized. Finally, a novel cross-layer energy-adaptive scheduling and queue management framework EAED (Energy Aware Early Detection), for preserving delay bounds and minimizing energy consumption in WLAN mesh networks, is proposed and evaluated with simulations. The simulations show that our scheme can save considerable amounts of transmission energy without violating application level QoS requirements when traffic load and distances are reasonable

AN ADAPTIVE INFORMATION DISSEMINATION MODEL FOR VANET COMMUNICATION

Vehicular ad hoc networks (VANETs) have been envisioned to be useful in road safety and many commercial applications. The growing trend to provide communication among the vehicles on the road has provided the opportunities for developing a variety of applications for VANET. The unique characteristics of VANET bring about new research challenges

A real-time packet scheduling system for a 6LoWPAN industrial application

Nowadays, the industrial Wireless Sensor Networks (WSN) are crucial for the monitoring and control of the modern smart factory floor that is relying on them for critical applications and tasks that were performed by wired systems in the past. For this reason, it is required that the transmission mechanisms of wireless sensor networks are efficient and robust and that they guarantee realtime responses with low data losses. Furthermore, it is required that they utilize common networking standards, such as the Internet Protocol (IP), that provides interoperability with already existing infrastructures and offers widely tested security and transmission control protocols. The theoretical part of this document focuses on the description of the current panorama of the industrial WSN, its applications, design challenges and standardizations. It describes the 6LoWPAN standard and the wireless transmission technology that it uses for its lower layers, the IEEE 802.15.4 protocol. Later, it describes the principles behind the wireless scheduling, a state-of-the-art in the IEEE 802.15.4 scheduled channel access and the features of the most used operating systems for WSN. The practical part presents the real-time packet scheduling system for a 6LoWPAN industrial application proposed by this thesis work that adapts the HSDPA scheduling mechanisms to the IEEE 802.15.4 beacon-enabled mode. The system implemented manages the channel access by allocating Guaranteed Time Slots to sensor nodes according to the priority given by three scheduling algorithms that can be selected according to the traffic condition of the network. The system proposed was programmed using Contiki OS. It is based on the eSONIA 6LoWPAN firmware developed for the European Research Project and it was deployed on the FAST WSN for testing. The results, discussion and conclusions are documented at the final sections of this part

Mechanisms for QoE optimisation of video traffic: a review paper

Transmission of video traffic over the Internet has grown exponentially in the past few years with no sign of waning. This increasing demand for video services has changed user expectation of quality. Various mechanisms have been proposed to optimise the Quality of Experience (QoE) of end users’ video. Studying these approaches are necessary for new methods to be proposed or combination of existing ones to be tailored. We discuss challenges facing the optimisation of QoE for video traffic in this paper. It surveys and classifies these mechanisms based on their functions. The limitation of each of them is identified and future directions are highlighted

Lightweight mobile and wireless systems: technologies, architectures, and services

1Department of Information and Communication Systems Engineering (ICSE), University of the Aegean, 81100 Mytilene, Greece 2Department of Information Engineering and Computer Science (DISI), University of Trento, 38123 Trento, Italy 3Department of Informatics, Alexander Technological Educational Institute of Thessaloniki, Thessaloniki, 574 00 Macedonia, Greece 4Centre Tecnologic de Telecomunicacions de Catalunya (CTTC), 08860 Barcelona, Spain 5North Carolina State University (NCSU), Raleigh, NC 27695, US