Toward a unified PNT, Part 1: Complexity and context: Key challenges of multisensor positioning

The next generation of navigation and positioning systems must provide greater accuracy and reliability in a range of challenging environments to meet the needs of a variety of mission-critical applications. No single navigation technology is robust enough to meet these requirements on its own, so a multisensor solution is required. Known environmental features, such as signs, buildings, terrain height variation, and magnetic anomalies, may or may not be available for positioning. The system could be stationary, carried by a pedestrian, or on any type of land, sea, or air vehicle. Furthermore, for many applications, the environment and host behavior are subject to change. A multi-sensor solution is thus required. The expert knowledge problem is compounded by the fact that different modules in an integrated navigation system are often supplied by different organizations, who may be reluctant to share necessary design information if this is considered to be intellectual property that must be protected

Featureless visual processing for SLAM in changing outdoor environments

Vision-based SLAM is mostly a solved problem providing clear, sharp images can be obtained. However, in outdoor environments a number of factors such as rough terrain, high speeds and hardware limitations can result in these conditions not being met. High speed transit on rough terrain can lead to image blur and under/over exposure, problems that cannot easily be dealt with using low cost hardware. Furthermore, recently there has been a growth in interest in lifelong autonomy for robots, which brings with it the challenge in outdoor environments of dealing with a moving sun and lack of constant artificial lighting. In this paper, we present a lightweight approach to visual localization and visual odometry that addresses the challenges posed by perceptual change and low cost cameras. The approach combines low resolution imagery with the SLAM algorithm, RatSLAM. We test the system using a cheap consumer camera mounted on a small vehicle in a mixed urban and vegetated environment, at times ranging from dawn to dusk and in conditions ranging from sunny weather to rain. We first show that the system is able to provide reliable mapping and recall over the course of the day and incrementally incorporate new visual scenes from different times into an existing map. We then restrict the system to only learning visual scenes at one time of day, and show that the system is still able to localize and map at other times of day. The results demonstrate the viability of the approach in situations where image quality is poor and environmental or hardware factors preclude the use of visual features

Achieving genuinely dynamic road user charging : issues with a GNSS-based approach

Peer reviewedPostprin

New ITS applications for metropolitan areas based on Floating Car Data

The paper describes a couple of FCD based vehicular traffic applications and services. This new method is especially beneficial for regions with a poor traffic monitoring infrastructure because the necessary monetary effort to establish such a system is very small in comparison to conventional systems and it is flexible and easily adaptable to other regions. Particularly, emerging markets like China with a fast-changing road network and a high penetration of lat-est information technologies on one side but with serious foreseeable traffic related problems on the other side can surely profit from this approach. The new data collection and analysing methods result in better performance of the services enhance the scope of the services and hopefully enlarge user acceptance. All of the proposed solutions are prototypes and not all of them have been extensively tested up to now. Certainly, specific data processing methods need further research, some refinements and calibrations. Additionally, some applications still suffer from insufficient data penetration. Nevertheless, the approach is very general and it is very likely that FCD availability will sharply increase in near future and will enhance the quality of services

3D Visual Perception for Self-Driving Cars using a Multi-Camera System: Calibration, Mapping, Localization, and Obstacle Detection

Cameras are a crucial exteroceptive sensor for self-driving cars as they are low-cost and small, provide appearance information about the environment, and work in various weather conditions. They can be used for multiple purposes such as visual navigation and obstacle detection. We can use a surround multi-camera system to cover the full 360-degree field-of-view around the car. In this way, we avoid blind spots which can otherwise lead to accidents. To minimize the number of cameras needed for surround perception, we utilize fisheye cameras. Consequently, standard vision pipelines for 3D mapping, visual localization, obstacle detection, etc. need to be adapted to take full advantage of the availability of multiple cameras rather than treat each camera individually. In addition, processing of fisheye images has to be supported. In this paper, we describe the camera calibration and subsequent processing pipeline for multi-fisheye-camera systems developed as part of the V-Charge project. This project seeks to enable automated valet parking for self-driving cars. Our pipeline is able to precisely calibrate multi-camera systems, build sparse 3D maps for visual navigation, visually localize the car with respect to these maps, generate accurate dense maps, as well as detect obstacles based on real-time depth map extraction

A Force-Directed Approach for Offline GPS Trajectory Map Matching

We present a novel algorithm to match GPS trajectories onto maps offline (in batch mode) using techniques borrowed from the field of force-directed graph drawing. We consider a simulated physical system where each GPS trajectory is attracted or repelled by the underlying road network via electrical-like forces. We let the system evolve under the action of these physical forces such that individual trajectories are attracted towards candidate roads to obtain a map matching path. Our approach has several advantages compared to traditional, routing-based, algorithms for map matching, including the ability to account for noise and to avoid large detours due to outliers in the data whilst taking into account the underlying topological restrictions (such as one-way roads). Our empirical evaluation using real GPS traces shows that our method produces better map matching results compared to alternative offline map matching algorithms on average, especially for routes in dense, urban areas.Comment: 10 pages, 12 figures, accepted version of article submitted to ACM SIGSPATIAL 2018, Seattle, US

FLAT2D: Fast localization from approximate transformation into 2D

Many autonomous vehicles require precise localization into a prior map in order to support planning and to leverage semantic information within those maps (e.g. that the right lane is a turn-only lane.) A popular approach in automotive systems is to use infrared intensity maps of the ground surface to localize, making them susceptible to failures when the surface is obscured by snow or when the road is repainted. An emerging alternative is to localize based on the 3D structure around the vehicle; these methods are robust to these types of changes, but the maps are costly both in terms of storage and the computational cost of matching. In this paper, we propose a fast method for localizing based on 3D structure around the vehicle using a 2D representation. This representation retains many of the advantages of "full" matching in 3D, but comes with dramatically lower space and computational requirements. We also introduce a variation of Graph-SLAM tailored to support localization, allowing us to make use of graph-based error-recovery techniques in our localization estimate. Finally, we present real-world localization results for both an indoor mobile robotic platform and an autonomous golf cart, demonstrating that autonomous vehicles do not need full 3D matching to accurately localize in the environment