Orchestration and Scheduling of Resources in Softwarized Networks

The Fifth Generation (5G) era is touted as the next generation of mobile networks that will unleash new services and network capabilities, opening up a whole new line of businesses recognized by a top-notch Quality of Service (QoS) and Quality of Experience (QoE) empowered by many recent advancements in network softwarization and providing an innovative on-demand service provisioning on a shared underlying network infrastructure. 5G networks will support the immerse explosion of the Internet of Things (IoT) incurring an expected growth of billions of connected IoT devices by 2020, providing a wide range of services spanning from low-cost sensor-based metering services to low-latency communication services touching health, education and automotive sectors among others. Mobile operators are striving to find a cost effective network solution that will enable them to continuously and automatically upgrade their networks based on their ever growing customers demands in the quest of fulfilling the new rising opportunities of offering novel services empowered by the many emerging IoT devices. Thus, departing from the shortfalls of legacy hardware (i.e., high cost, difficult management and update, etc.) and learning from the different advantages of virtualization technologies which enabled the sharing of computing resources in a cloud environment, mobile operators started to leverage the idea of network softwarization through several emerging technologies. Network Function Virtualization (NFV) promises an ultimate Capital Expenditures (CAPEX) reduction and high flexibility in resource provisioning and service delivery through replacing hardware equipment by software. Software Defined Network (SDN) offers network and mobile operators programmable traffic management and delivery. These technologies will enable the launch of Multi-Access Edge Computing (MEC) paradigm that promises to complete the 5G networks requirements in providing low-latency services by bringing the computing resources to the edge of the network, in close vicinity of the users, hence, assisting the limited capabilities of their IoT devices in delivering their needed services. By leveraging network softwarization, these technologies will initiate a tremendous re-design of current networks that will be transformed to self-managed, software-based networks exploiting multiple benefits ranging from flexibility, programmability, automation, elasticity among others. This dissertation attempts to elaborate and address key challenges related to enabling the re-design of current networks to support a smooth integration of the NFV and MEC technologies. This thesis provides a profound understanding and novel contributions in resource and service provisioning and scheduling towards enabling efficient resource and network utilization of the underlying infrastructure by leveraging several optimization and game theoretic techniques. In particular, we first, investigate the interplay existing between network function mapping, traffic routing and Network Service (NS) scheduling in NFV-based networks and present a Column Generation (CG) decomposition method to solve the problem with considerable runtime improvement over mathematical-based formulations. Given the increasing interest in providing low-latency services and the correlation existing between this objective and the goal of network operators in maximizing their network admissibility through efficiently utilizing their network resources, we revisit the latter problem and tackle it under different assumptions and objectives. Given its complexity, we present a novel game theoretic approach that is able to provide a bounded solution of the problem. Further, we extend our work to the network edge where we promote network elasticity and alleviate virtualization technologies by addressing the problem of task offloading and scheduling along with the IoT application resource allocation problem. Given the complexity of the problem, we propose a Logic-Based Benders (LBBD) decomposition method to efficiently solve it to optimality

NFV orchestration in edge and fog scenarios

Mención Internacional en el título de doctorLas infraestructuras de red actuales soportan una variedad diversa de servicios como video bajo demanda, video conferencias, redes sociales, sistemas de educación, o servicios de almacenamiento de fotografías. Gran parte de la población mundial ha comenzado a utilizar estos servicios, y los utilizan diariamente. Proveedores de Cloud y operadores de infraestructuras de red albergan el tráfico de red generado por estos servicios, y sus tareas de gestión no solo implican realizar el enrutamiento del tráfico, sino también el procesado del tráfico de servicios de red. Tradicionalmente, el procesado del tráfico ha sido realizado mediante aplicaciones/ programas desplegados en servidores que estaban dedicados en exclusiva a tareas concretas como la inspección de paquetes. Sin embargo, en los últimos anos los servicios de red se han virtualizado y esto ha dado lugar al paradigma de virtualización de funciones de red (Network Function Virtualization (NFV) siguiendo las siglas en ingles), en el que las funciones de red de un servicio se ejecutan en contenedores o máquinas virtuales desacopladas de la infraestructura hardware. Como resultado, el procesado de tráfico se ha ido haciendo más flexible gracias al laxo acople del software y hardware, y a la posibilidad de compartir funciones de red típicas, como firewalls, entre los distintos servicios de red. NFV facilita la automatización de operaciones de red, ya que tareas como el escalado, o la migración son típicamente llevadas a cabo mediante un conjunto de comandos previamente definidos por la tecnología de virtualización pertinente, bien mediante contenedores o máquinas virtuales. De todos modos, sigue siendo necesario decidir el en rutamiento y procesado del tráfico de cada servicio de red. En otras palabras, que servidores tienen que encargarse del procesado del tráfico, y que enlaces de la red tienen que utilizarse para que las peticiones de los usuarios lleguen a los servidores finales, es decir, el conocido como embedding problem. Bajo el paraguas del paradigma NFV, a este problema se le conoce en inglés como Virtual Network Embedding (VNE), y esta tesis utiliza el termino “NFV orchestration algorithm” para referirse a los algoritmos que resuelven este problema. El problema del VNE es NP-hard, lo cual significa que que es imposible encontrar una solución optima en un tiempo polinómico, independientemente del tamaño de la red. Como consecuencia, la comunidad investigadora y de telecomunicaciones utilizan heurísticos que encuentran soluciones de manera más rápida que productos para la resolución de problemas de optimización. Tradicionalmente, los “NFV orchestration algorithms” han intentado minimizar los costes de despliegue derivados de las soluciones asociadas. Por ejemplo, estos algoritmos intentan no consumir el ancho de banda de la red, y usar rutas cortas para no utilizar tantos recursos. Además, una tendencia reciente ha llevado a la comunidad investigadora a utilizar algoritmos que minimizan el consumo energético de los servicios desplegados, bien mediante la elección de dispositivos con un consumo energético más eficiente, o mediante el apagado de dispositivos de red en desuso. Típicamente, las restricciones de los problemas de VNE se han resumido en un conjunto de restricciones asociadas al uso de recursos y consumo energético, y las soluciones se diferenciaban por la función objetivo utilizada. Pero eso era antes de la 5a generación de redes móviles (5G) se considerase en el problema de VNE. Con la aparición del 5G, nuevos servicios de red y casos de uso entraron en escena. Los estándares hablaban de comunicaciones ultra rápidas y fiables (Ultra-Reliable and Low Latency Communications (URLLC) usando las siglas en inglés) con latencias por debajo de unos pocos milisegundos y fiabilidades del 99.999%, una banda ancha mejorada (enhanced Mobile Broadband (eMBB) usando las siglas en inglés) con notorios incrementos en el flujo de datos, e incluso la consideración de comunicaciones masivas entre maquinas (Massive Machine-Type Communications (mMTC) usando las siglas en inglés) entre dispositivos IoT. Es más, paradigmas como edge y fog computing se incorporaron a la tecnología 5G, e introducían la idea de tener dispositivos de computo más cercanos al usuario final. Como resultado, el problema del VNE tenía que incorporar los nuevos requisitos como restricciones a tener en cuenta, y toda solución debía satisfacer bajas latencias, alta fiabilidad, y mayores tasas de transmisión. Esta tesis estudia el problema des VNE, y propone algunos heurísticos que lidian con las restricciones asociadas a servicios 5G en escenarios edge y fog, es decir, las soluciones propuestas se encargan de asignar funciones virtuales de red a servidores, y deciden el enrutamiento del trafico en las infraestructuras 5G con dispositivos edge y fog. Para evaluar el rendimiento de las soluciones propuestas, esta tesis estudia en primer lugar la generación de grafos que representan redes 5G. Los mecanismos propuestos para la generación de grafos sirven para representar distintos escenarios 5G. En particular, escenarios de federación en los que varios dominios comparten recursos entre ellos. Los grafos generados también representan servidores en el edge, así como dispositivos fog con una batería limitada. Además, estos grafos tienen en cuenta los requisitos de estándares, y la demanda que se espera en las redes 5G. La generación de grafos propuesta sirve para representar escenarios federación en los que varios dominios comparten recursos entre ellos, y redes 5G con servidores edge, así como dispositivos fog estáticos o móviles con una batería limitada. Los grafos generados para infraestructuras 5G tienen en cuenta los requisitos de estándares, y la demanda de red que se espera en las redes 5G. Además, los grafos son diferentes en función de la densidad de población, y el área de estudio, es decir, si es una zona industrial, una autopista, o una zona urbana. Tras detallar la generación de grafos que representan redes 5G, esta tesis propone algoritmos de orquestación NFV para resolver con el problema del VNE. Primero, se centra en escenarios federados en los que los servicios de red se tienen que asignar no solo a la infraestructura de un dominio, sino a los recursos compartidos en la federación de dominios. Dos problemas diferentes han sido estudiados, uno es el problema del VNE propiamente dicho sobre una infraestructura federada, y el otro es la delegación de servicios de red. Es decir, si un servicio de red se debe desplegar localmente en un dominio, o en los recursos compartidos por la federación de dominios; a sabiendas de que el último caso supone el pago de cuotas por parte del dominio local a cambio del despliegue del servicio de red. En segundo lugar, esta tesis propone OKpi, un algoritmo de orquestación NFV para conseguir la calidad de servicio de las distintas slices de las redes 5G. Conceptualmente, el slicing consiste en partir la red de modo que cada servicio de red sea tratado de modo diferente dependiendo del trozo al que pertenezca. Por ejemplo, una slice de eHealth reservara los recursos de red necesarios para conseguir bajas latencias en servicios como operaciones quirúrgicas realizadas de manera remota. Cada trozo (slice) está destinado a unos servicios específicos con unos requisitos muy concretos, como alta fiabilidad, restricciones de localización, o latencias de un milisegundo. OKpi es un algoritmo de orquestación NFV que consigue satisfacer los requisitos de servicios de red en los distintos trozos, o slices de la red. Tras presentar OKpi, la tesis resuelve el problema del VNE en redes 5G con dispositivos fog estáticos y móviles. El algoritmo de orquestación NFV presentado tiene en cuenta las limitaciones de recursos de computo de los dispositivos fog, además de los problemas de falta de cobertura derivados de la movilidad de los dispositivos. Para concluir, esta tesis estudia el escalado de servicios vehiculares Vehicle-to-Network (V2N), que requieren de bajas latencias para servicios como la prevención de choques, avisos de posibles riesgos, y conducción remota. Para estos servicios, los atascos y congestiones en la carretera pueden causar el incumplimiento de los requisitos de latencia. Por tanto, es necesario anticiparse a esas circunstancias usando técnicas de series temporales que permiten saber el tráfico inminente en los siguientes minutos u horas, para así poder escalar el servicio V2N adecuadamente.Current network infrastructures handle a diverse range of network services such as video on demand services, video-conferences, social networks, educational systems, or photo storage services. These services have been embraced by a significant amount of the world population, and are used on a daily basis. Cloud providers and Network operators’ infrastructures accommodate the traffic rates that the aforementioned services generate, and their management tasks do not only involve the traffic steering, but also the processing of the network services’ traffic. Traditionally, the traffic processing has been assessed via applications/programs deployed on servers that were exclusively dedicated to a specific task as packet inspection. However, in recent years network services have stated to be virtualized and this has led to the Network Function Virtualization (Network Function Virtualization (NFV)) paradigm, in which the network functions of a service run on containers or virtual machines that are decoupled from the hardware infrastructure. As a result, the traffic processing has become more flexible because of the loose coupling between software and hardware, and the possibility of sharing common network functions, as firewalls, across multiple network services. NFV eases the automation of network operations, since scaling and migrations tasks are typically performed by a set of commands predefined by the virtualization technology, either containers or virtual machines. However, it is still necessary to decide the traffic steering and processing of every network service. In other words, which servers will hold the traffic processing, and which are the network links to be traversed so the users’ requests reach the final servers, i.e., the network embedding problem. Under the umbrella of NFV, this problem is known as Virtual Network Embedding (VNE), and this thesis refers as “NFV orchestration algorithms” to those algorithms solving such a problem. The VNE problem is a NP-hard, meaning that it is impossible to find optimal solutions in polynomial time, no matter the network size. As a consequence, the research and telecommunications community rely on heuristics that find solutions quicker than a commodity optimization solver. Traditionally, NFV orchestration algorithms have tried to minimize the deployment costs derived from their solutions. For example, they try to not exhaust the network bandwidth, and use short paths to use less network resources. Additionally, a recent tendency led the research community towards algorithms that minimize the energy consumption of the deployed services, either by selecting more energy efficient devices or by turning off those network devices that remained unused. VNE problem constraints were typically summarized in a set of resources/energy constraints, and the solutions differed on which objectives functions were aimed for. But that was before 5th generation of mobile networks (5G) were considered in the VNE problem. With the appearance of 5G, new network services and use cases started to emerge. The standards talked about Ultra Reliable Low Latency Communication (Ultra-Reliable and Low Latency Communications (URLLC)) with latencies below few milliseconds and 99.999% reliability, an enhanced mobile broadband (enhanced Mobile Broadband (eMBB)) with significant data rate increases, and even the consideration of massive machine-type communications (Massive Machine-Type Communications (mMTC)) among Internet of Things (IoT) devices. Moreover, paradigms such as edge and fog computing blended with the 5G technology to introduce the idea of having computing devices closer to the end users. As a result, the VNE problem had to incorporate the new requirements as constraints to be taken into account, and every solution should either satisfy low latencies, high reliability, or larger data rates. This thesis studies the VNE problem, and proposes some heuristics tackling the constraints related to 5G services in Edge and fog scenarios, that is, the proposed solutions assess the assignment of Virtual Network Functions to resources, and the traffic steering across 5G infrastructures that have Edge and Fog devices. To evaluate the performance of the proposed solutions, the thesis studies first the generation of graphs that represent 5G networks. The proposed mechanisms to generate graphs serve to represent diverse 5G scenarios. In particular federation scenarios in which several domains share resources among themselves. The generated graphs also represent edge servers, so as fog devices with limited battery capacity. Additionally, these graphs take into account the standard requirements, and the expected demand for 5G networks. Moreover, the graphs differ depending on the density of population, and the area of study, i.e., whether it is an industrial area, a highway, or an urban area. After detailing the generation of graphs representing the 5G networks, this thesis proposes several NFV orchestration algorithms to tackle the VNE problem. First, it focuses on federation scenarios in which network services should be assigned not only to a single domain infrastructure, but also to the shared resources of the federation of domains. Two different problems are studied, one being the VNE itself over a federated infrastructure, and the other the delegation of network services. That is, whether a network service should be deployed in a local domain, or in the pool of resources of the federation domain; knowing that the latter charges the local domain for hosting the network service. Second, the thesis proposes OKpi, a NFV orchestration algorithm to meet 5G network slices quality of service. Conceptually, network slicing consists in splitting the network so network services are treated differently based on the slice they belong to. For example, an eHealth network slice will allocate the network resources necessary to meet low latencies for network services such as remote surgery. Each network slice is devoted to specific services with very concrete requirements, as high reliability, location constraints, or 1ms latencies. OKpi is a NFV orchestration algorithm that meets the network service requirements among different slices. It is based on a multi-constrained shortest path heuristic, and its solutions satisfy latency, reliability, and location constraints. After presenting OKpi, the thesis tackles the VNE problem in 5G networks with static/moving fog devices. The presented NFV orchestration algorithm takes into account the limited computing resources of fog devices, as well as the out-of-coverage problems derived from the devices’ mobility. To conclude, this thesis studies the scaling of Vehicle-to-Network (V2N) services, which require low latencies for network services as collision avoidance, hazard warning, and remote driving. For these services, the presence of traffic jams, or high vehicular traffic congestion lead to the violation of latency requirements. Hence, it is necessary to anticipate to such circumstances by using time-series techniques that allow to derive the incoming vehicular traffic flow in the next minutes or hours, so as to scale the V2N service accordingly.The 5G Exchange (5GEx) project (2015-2018) was an EU-funded project (H2020-ICT-2014-2 grant agreement 671636). The 5G-TRANSFORMER project (2017-2019) is an EU-funded project (H2020-ICT-2016-2 grant agreement 761536). The 5G-CORAL project (2017-2019) is an EU-Taiwan project (H2020-ICT-2016-2 grant agreement 761586).Programa de Doctorado en Ingeniería Telemática por la Universidad Carlos III de MadridPresidente: Ioannis Stavrakakis.- Secretario: Pablo Serrano Yáñez-Mingot.- Vocal: Paul Horatiu Patra

Provisioning Ultra-Low Latency Services in Softwarized Network for the Tactile Internet

The Internet has made several giant leaps over the years, from a fixed to a mobile Internet, then to the Internet of Things, and now to a Tactile Internet. The Tactile Internet is envisioned to deliver real-time control and physical tactile experiences remotely in addition to conventional audiovisual data to enable immersive human-to-machine interaction and allow skill-set delivery over networks. To realize the Tactile Internet, two key performance requirements, namely ultra-low latency and ultra-high reliability need to be achieved. However, currently deployed networks are far from meeting these stringent requirements and cannot efficiently cope with dynamic service arrivals/departures and the significant growth of traffic demands. To fulfill these requirements, a softwarized network enabled by network function virtualization (NFV) and software-defined network (SDN) technologies is introduced as a new promising concept of a future network due to its flexibility, agility, scalability and cost efficiency. Despite these benefits, provisioning Tactile Internet network services (NSs) in an NFV-based infrastructure remains a challenge, as network resources must be allocated for virtual network function (VNF) deployment and traffic routing in such a way that the stringent requirements are met, and network operator’s objectives are optimized. This problem is also well-known, as NFV resource allocation (NFV-RA) and can be further divided into three stages: (i) VNF composition, (ii) VNF embedding/placement and (iii) VNF scheduling. This thesis addresses challenges on NFV-RA for Tactile Internet NSs, especially ultra-low latency NSs. We first conduct a survey on architectural and algorithmic solutions proposed so far for the Tactile Internet. Second, we propose a joint VNF composition and embedding algorithm to efficiently determine the number of VNF instances to form a VNF forward graph (VNF-FG) and their embedding locations to serve ultra-low latency NSs, as in some cases, multiple instances of each VNF type with proper embedding may be needed to guarantee the stringent latency requirements. The proposed algorithm relies on a Tabu search method to solve the problem with a reasonable time. Third, we introduce real-time VNF embedding algorithms to efficiently support ultra-low latency NSs that require fast service provisioning. By assuming that a VNF-FG is given, our proposed algorithms aim to minimize the cost while meeting the stringent latency requirement. Finally, we focus on a joint VNF embedding and scheduling problem, assuming that ultra-low latency NSs can arrive in the network any time and have specific service deadlines. Moreover, VNF instances once deployed can be shared by multiple NSs. With these assumptions, we aim to optimally determine whether to schedule NSs on already deployed VNFs or to deploy new VNFs and schedule them on newly deployed VNFs to maximize profits while guaranteeing the stringent service deadlines. Two efficient heuristics are introduced to solve this problem with a feasible time

Towards edge robotics: the progress from cloud-based robotic systems to intelligent and context-aware robotic services

Current robotic systems handle a different range of applications such as video surveillance, delivery of goods, cleaning, material handling, assembly, painting, or pick and place services. These systems have been embraced not only by the general population but also by the vertical industries to help them in performing daily activities. Traditionally, the robotic systems have been deployed in standalone robots that were exclusively dedicated to performing a specific task such as cleaning the floor in indoor environments. In recent years, cloud providers started to offer their infrastructures to robotic systems for offloading some of the robot’s functions. This ultimate form of the distributed robotic system was first introduced 10 years ago as cloud robotics and nowadays a lot of robotic solutions are appearing in this form. As a result, standalone robots became software-enhanced objects with increased reconfigurability as well as decreased complexity and cost. Moreover, by offloading the heavy processing from the robot to the cloud, it is easier to share services and information from various robots or agents to achieve better cooperation and coordination. Cloud robotics is suitable for human-scale responsive and delay-tolerant robotic functionalities (e.g., monitoring, predictive maintenance). However, there is a whole set of real-time robotic applications (e.g., remote control, motion planning, autonomous navigation) that can not be executed with cloud robotics solutions, mainly because cloud facilities traditionally reside far away from the robots. While the cloud providers can ensure certain performance in their infrastructure, very little can be ensured in the network between the robots and the cloud, especially in the last hop where wireless radio access networks are involved. Over the last years advances in edge computing, fog computing, 5G NR, network slicing, Network Function Virtualization (NFV), and network orchestration are stimulating the interest of the industrial sector to satisfy the stringent and real-time requirements of their applications. Robotic systems are a key piece in the industrial digital transformation and their benefits are very well studied in the literature. However, designing and implementing a robotic system that integrates all the emerging technologies and meets the connectivity requirements (e.g., latency, reliability) is an ambitious task. This thesis studies the integration of modern Information andCommunication Technologies (ICTs) in robotic systems and proposes some robotic enhancements that tackle the real-time constraints of robotic services. To evaluate the performance of the proposed enhancements, this thesis departs from the design and prototype implementation of an edge native robotic system that embodies the concepts of edge computing, fog computing, orchestration, and virtualization. The proposed edge robotics system serves to represent two exemplary robotic applications. In particular, autonomous navigation of mobile robots and remote-control of robot manipulator where the end-to-end robotic system is distributed between the robots and the edge server. The open-source prototype implementation of the designed edge native robotic system resulted in the creation of two real-world testbeds that are used in this thesis as a baseline scenario for the evaluation of new innovative solutions in robotic systems. After detailing the design and prototype implementation of the end-to-end edge native robotic system, this thesis proposes several enhancements that can be offered to robotic systems by adapting the concept of edge computing via the Multi-Access Edge Computing (MEC) framework. First, it proposes exemplary network context-aware enhancements in which the real-time information about robot connectivity and location can be used to dynamically adapt the end-to-end system behavior to the actual status of the communication (e.g., radio channel). Three different exemplary context-aware enhancements are proposed that aim to optimize the end-to-end edge native robotic system. Later, the thesis studies the capability of the edge native robotic system to offer potential savings by means of computation offloading for robot manipulators in different deployment configurations. Further, the impact of different wireless channels (e.g., 5G, 4G andWi-Fi) to support the data exchange between a robot manipulator and its remote controller are assessed. In the following part of the thesis, the focus is set on how orchestration solutions can support mobile robot systems to make high quality decisions. The application of OKpi as an orchestration algorithm and DLT-based federation are studied to meet the KPIs that autonomously controlledmobile robots have in order to provide uninterrupted connectivity over the radio access network. The elaborated solutions present high compatibility with the designed edge robotics system where the robot driving range is extended without any interruption of the end-to-end edge robotics service. While the DLT-based federation extends the robot driving range by deploying access point extension on top of external domain infrastructure, OKpi selects the most suitable access point and computing resource in the cloud-to-thing continuum in order to fulfill the latency requirements of autonomously controlled mobile robots. To conclude the thesis the focus is set on how robotic systems can improve their performance by leveraging Artificial Intelligence (AI) and Machine Learning (ML) algorithms to generate smart decisions. To do so, the edge native robotic system is presented as a true embodiment of a Cyber-Physical System (CPS) in Industry 4.0, showing the mission of AI in such concept. It presents the key enabling technologies of the edge robotic system such as edge, fog, and 5G, where the physical processes are integrated with computing and network domains. The role of AI in each technology domain is identified by analyzing a set of AI agents at the application and infrastructure level. In the last part of the thesis, the movement prediction is selected to study the feasibility of applying a forecast-based recovery mechanism for real-time remote control of robotic manipulators (FoReCo) that uses ML to infer lost commands caused by interference in the wireless channel. The obtained results are showcasing the its potential in simulation and real-world experimentation.Programa de Doctorado en Ingeniería Telemática por la Universidad Carlos III de MadridPresidente: Karl Holger.- Secretario: Joerg Widmer.- Vocal: Claudio Cicconett

Conception des chaînes logistiques multicritères avec prise en compte des incertitudes

Les modèles de conception des chaînes logistiques sont devenus de plus en plus complexes, à cause de l'environnement économique incertain et l'introduction de nouveaux critères de décision tels que : l'aspect environnemental, l'aspect social, l'aspect législatif, l'aspect économique, la satisfaction du client et la prise en compte des risques. Répondre aux changements qui touchent les chaînes logistiques exige de composer avec des incertitudes et des informations incomplètes. Configurer des chaînes logistiques multicritères avec prise en compte des incertitudes peut garantir la continuité des activités de l'entreprise.L'objectif principal de cette thèse est la conception de chaînes logistiques multicritères qui résistent aux changements et l'instabilité des marchés. Le manuscrit de cette thèse s'articule autour de sept principaux chapitres:1 - introduction.2 - Etat de l'art sur la conception des chaînes logistiques.3 -Conception des chaînes logistiques multicritères en mesure de répondre aux nouveauxcritères économiques, sociaux, environnementaux et législatifs.4 - Conception des chaînes logistiques multi-objectifs.5 - Développement d'une heuristique de résolution des problèmes de conception deschaînes logistiques de taille réelle.6 - Conception des chaînes logistiques avec prise en compte des incertitudes.7 - Conclusions et perspectives.This thesis contributes to the debate on how uncertainty and concepts of sustainable development can be put into modern supply chain network and focuses on issues associated with the design of multi-criteria supply chain network under uncertainty. First, we study the literature review , which is a review of the current state of the art of Supply Chain Network Design approaches and resolution methods. Second, we propose a new methodology for multi-criteria Supply Chain Network Design (SCND) as well as its application to real Supply Chain Network (SCN), in order to satisfy the customers demand and respect the environmental, social, legislative, and economical requirements. The methodology consists of two different steps. In the first step, we use Geographic Information System (GIS) and Analytic Hierarchy Process (AHP) to buildthe model. Then, in the second step, we establish the optimal supply chain network using Mixed Integer Linear Programming model (MILP). Third, we extend the MILP to a multi-objective optimization model that captures a compromisebetween the total cost and the environment influence. We use Goal Programming approach seeking to reach the goals placed by Decision Maker. After that, we develop a novel heuristic solution method based on decomposition technique, to solve large scale supply chain network design problems that we failed to solve using exact methods. The heuristic method is tested on real case instances and numerical comparisons show that our heuristic yield high quality solutions in very limited CPU time. Finally, again, we extend the MILP model presented before where we assume that the costumer demands are uncertain. We use two-stage stochastic programming approach to model the supply chain network under demand uncertainty. Then, we address uncertainty in all SC parameters: opening costs, production costs, storage costs and customers demands. We use possibilistic linear programming approach to model the problem and we validate both approaches in a large application case.ARRAS-Bib.electronique (620419901) / SudocSudocFranceF

Machine Learning-based Orchestration Solutions for Future Slicing-Enabled Mobile Networks

The fifth generation mobile networks (5G) will incorporate novel technologies such as network programmability and virtualization enabled by Software-Defined Networking (SDN) and Network Function Virtualization (NFV) paradigms, which have recently attracted major interest from both academic and industrial stakeholders. Building on these concepts, Network Slicing raised as the main driver of a novel business model where mobile operators may open, i.e., “slice”, their infrastructure to new business players and offer independent, isolated and self-contained sets of network functions and physical/virtual resources tailored to specific services requirements. While Network Slicing has the potential to increase the revenue sources of service providers, it involves a number of technical challenges that must be carefully addressed. End-to-end (E2E) network slices encompass time and spectrum resources in the radio access network (RAN), transport resources on the fronthauling/backhauling links, and computing and storage resources at core and edge data centers. Additionally, the vertical service requirements’ heterogeneity (e.g., high throughput, low latency, high reliability) exacerbates the need for novel orchestration solutions able to manage end-to-end network slice resources across different domains, while satisfying stringent service level agreements and specific traffic requirements. An end-to-end network slicing orchestration solution shall i) admit network slice requests such that the overall system revenues are maximized, ii) provide the required resources across different network domains to fulfill the Service Level Agreements (SLAs) iii) dynamically adapt the resource allocation based on the real-time traffic load, endusers’ mobility and instantaneous wireless channel statistics. Certainly, a mobile network represents a fast-changing scenario characterized by complex spatio-temporal relationship connecting end-users’ traffic demand with social activities and economy. Legacy models that aim at providing dynamic resource allocation based on traditional traffic demand forecasting techniques fail to capture these important aspects. To close this gap, machine learning-aided solutions are quickly arising as promising technologies to sustain, in a scalable manner, the set of operations required by the network slicing context. How to implement such resource allocation schemes among slices, while trying to make the most efficient use of the networking resources composing the mobile infrastructure, are key problems underlying the network slicing paradigm, which will be addressed in this thesis

Global supply chains of high value low volume products

Imperial Users onl

Distributed resource distribution and offloading for resource-agnostic microservices in industrial IoT

Due to increase in real-time mobile applications and Industrial Internet-of-Things (IIoT) devices, the edge computing paradigm provides a systematic and eccentric platform for real-time Internet-of-Things applications. Though the paradigm provides an effective infrastructure, however the resource requirements of IIoT devices change radically with time, which is described as a resource-agnostic property. Therefore, the estimation of resource requirements of IIoT devices is a critical and resilient assignment. In addition, it requires an extensive amount of resources to process the data traffic flows and microservice offloading. Hence, we present RAISE, a novel resource-agnostic microservice offloading scheme for mobile IIoT devices. RAISE efficiently estimates the resource-agnostic nature of IIoT devices to maximize their resource utilization in the network. Based on the estimated resource requirement, we propose a resource-agnostic microservice offloading scheme to maximize the success rate. Extensive experiments show that RAISE provides better performance in terms of network throughput and Quality-of-Service (QoS) than the other existing methods, SDTO and DTOS, in terms of cost and reliability

Fuelling the zero-emissions road freight of the future: routing of mobile fuellers

The future of zero-emissions road freight is closely tied to the sufficient availability of new and clean fuel options such as electricity and Hydrogen. In goods distribution using Electric Commercial Vehicles (ECVs) and Hydrogen Fuel Cell Vehicles (HFCVs) a major challenge in the transition period would pertain to their limited autonomy and scarce and unevenly distributed refuelling stations. One viable solution to facilitate and speed up the adoption of ECVs/HFCVs by logistics, however, is to get the fuel to the point where it is needed (instead of diverting the route of delivery vehicles to refuelling stations) using "Mobile Fuellers (MFs)". These are mobile battery swapping/recharging vans or mobile Hydrogen fuellers that can travel to a running ECV/HFCV to provide the fuel they require to complete their delivery routes at a rendezvous time and space. In this presentation, new vehicle routing models will be presented for a third party company that provides MF services. In the proposed problem variant, the MF provider company receives routing plans of multiple customer companies and has to design routes for a fleet of capacitated MFs that have to synchronise their routes with the running vehicles to deliver the required amount of fuel on-the-fly. This presentation will discuss and compare several mathematical models based on different business models and collaborative logistics scenarios