HERO: Heterogeneous Embedded Research Platform for Exploring RISC-V Manycore Accelerators on FPGA

Heterogeneous embedded systems on chip (HESoCs) co-integrate a standard host processor with programmable manycore accelerators (PMCAs) to combine general-purpose computing with domain-specific, efficient processing capabilities. While leading companies successfully advance their HESoC products, research lags behind due to the challenges of building a prototyping platform that unites an industry-standard host processor with an open research PMCA architecture. In this work we introduce HERO, an FPGA-based research platform that combines a PMCA composed of clusters of RISC-V cores, implemented as soft cores on an FPGA fabric, with a hard ARM Cortex-A multicore host processor. The PMCA architecture mapped on the FPGA is silicon-proven, scalable, configurable, and fully modifiable. HERO includes a complete software stack that consists of a heterogeneous cross-compilation toolchain with support for OpenMP accelerator programming, a Linux driver, and runtime libraries for both host and PMCA. HERO is designed to facilitate rapid exploration on all software and hardware layers: run-time behavior can be accurately analyzed by tracing events, and modifications can be validated through fully automated hard ware and software builds and executed tests. We demonstrate the usefulness of HERO by means of case studies from our research

dReDBox: Materializing a full-stack rack-scale system prototype of a next-generation disaggregated datacenter

Current datacenters are based on server machines, whose mainboard and hardware components form the baseline, monolithic building block that the rest of the system software, middleware and application stack are built upon. This leads to the following limitations: (a) resource proportionality of a multi-tray system is bounded by the basic building block (mainboard), (b) resource allocation to processes or virtual machines (VMs) is bounded by the available resources within the boundary of the mainboard, leading to spare resource fragmentation and inefficiencies, and (c) upgrades must be applied to each and every server even when only a specific component needs to be upgraded. The dRedBox project (Disaggregated Recursive Datacentre-in-a-Box) addresses the above limitations, and proposes the next generation, low-power, across form-factor datacenters, departing from the paradigm of the mainboard-as-a-unit and enabling the creation of function-block-as-a-unit. Hardware-level disaggregation and software-defined wiring of resources is supported by a full-fledged Type-1 hypervisor that can execute commodity virtual machines, which communicate over a low-latency and high-throughput software-defined optical network. To evaluate its novel approach, dRedBox will demonstrate application execution in the domains of network functions virtualization, infrastructure analytics, and real-time video surveillance.This work has been supported in part by EU H2020 ICTproject dRedBox, contract #687632.Peer ReviewedPostprint (author's final draft

Software-Defined Radio Demonstrators: An Example and Future Trends

Software-defined radio requires the combination of software-based signal processing and the enabling hardware components. In this paper, we present an overview of the criteria for such platforms and the current state of development and future trends in this area. This paper will also provide details of a high-performance flexible radio platform called the maynooth adaptable radio system (MARS) that was developed to explore the use of software-defined radio concepts in the provision of infrastructure elements in a telecommunications application, such as mobile phone basestations or multimedia broadcasters

TANGO: Transparent heterogeneous hardware Architecture deployment for eNergy Gain in Operation

The paper is concerned with the issue of how software systems actually use Heterogeneous Parallel Architectures (HPAs), with the goal of optimizing power consumption on these resources. It argues the need for novel methods and tools to support software developers aiming to optimise power consumption resulting from designing, developing, deploying and running software on HPAs, while maintaining other quality aspects of software to adequate and agreed levels. To do so, a reference architecture to support energy efficiency at application construction, deployment, and operation is discussed, as well as its implementation and evaluation plans.Comment: Part of the Program Transformation for Programmability in Heterogeneous Architectures (PROHA) workshop, Barcelona, Spain, 12th March 2016, 7 pages, LaTeX, 3 PNG figure

Multi-Tenant Cloud FPGA: A Survey on Security

With the exponentially increasing demand for performance and scalability in cloud applications and systems, data center architectures evolved to integrate heterogeneous computing fabrics that leverage CPUs, GPUs, and FPGAs. FPGAs differ from traditional processing platforms such as CPUs and GPUs in that they are reconfigurable at run-time, providing increased and customized performance, flexibility, and acceleration. FPGAs can perform large-scale search optimization, acceleration, and signal processing tasks compared with power, latency, and processing speed. Many public cloud provider giants, including Amazon, Huawei, Microsoft, Alibaba, etc., have already started integrating FPGA-based cloud acceleration services. While FPGAs in cloud applications enable customized acceleration with low power consumption, it also incurs new security challenges that still need to be reviewed. Allowing cloud users to reconfigure the hardware design after deployment could open the backdoors for malicious attackers, potentially putting the cloud platform at risk. Considering security risks, public cloud providers still don't offer multi-tenant FPGA services. This paper analyzes the security concerns of multi-tenant cloud FPGAs, gives a thorough description of the security problems associated with them, and discusses upcoming future challenges in this field of study

Software Defined Radio Platform for Cognitive Radio: Design and Hierarchical Management

ISBN 978-953-307-274-6Cognitive radio (CR) and/or Software Defined Radio (SDR) inherently require multiband and multi-standard wireless circuit. A SDR is a communications device whose functionality is defined in software. Defining the radio behaviour in software removes the need for hardware alterations during a technology upgrade. A promised open architecture platform for SDR is proposed in this chapter. The platform consists of reconfigurable and reprogrammable hardware platform which provide different standards with a common platform, the SDR software framework which control and manage the whole systems, and the protocol processing software modules which is built on reusable protocol libraries. The main idea here is to have a very flexible platform that enables us to test the validity of the following design approaches: FPGA dynamic partial reconfiguration techniques, parameterization design approach using common operators, hierarchical distributed reconfiguration management

Build framework and runtime abstraction for partial reconfiguration on FPGA SoCs

Growth in edge computing has increased the requirement for edge systems to process larger volumes of real-time data, such as with image processing and machine learning; which are increasingly demanding of computing resources. Offloading tasks to the cloud provides some relief but is network dependant, high latency and expensive. Alternative architectures such as GPUs provide higher performance acceleration for this type of data processing but trade processing performance for an increase in power consumption. Another option is the Field Programmable Gate Array; a flexible matrix of logic that can be configured by a designer to provide a highly optimised computation path for incoming data. There are drawbacks; the FPGA design process is complex, the domain is dissimilar to software and the tools require bespoke expertise. A designer must manage the hardware to software paradigm introduced when tightly-coupled with general purpose processor. Advanced features, such as the ability to partially reconfigure (PR) specific regions of the FPGA, further increase this complexity. This thesis presents theory and demonstration of custom frameworks and tools for increasing abstraction and simplifying control over PR applications. We present mechanisms for networked PR; a mechanism for bypassing the traditional software networking stack to trigger PR with reduced latency and increased determinism. We developed a build framework for automating the end-to-end PR design process for Linux based systems as well as an abstracted runtime for managing the resulting applications. Finally, we take expand on this work and present a high level abstraction for PR on cyber physical systems, with a demonstration using the Robot Operating System. This work is released as open source contributions, designed to enable future PR research

Exploiting Hardware Abstraction for Parallel Programming Framework: Platform and Multitasking

With the help of the parallelism provided by the fine-grained architecture, hardware accelerators on Field Programmable Gate Arrays (FPGAs) can significantly improve the performance of many applications. However, designers are required to have excellent hardware programming skills and unique optimization techniques to explore the potential of FPGA resources fully. Intermediate frameworks above hardware circuits are proposed to improve either performance or productivity by leveraging parallel programming models beyond the multi-core era. In this work, we propose the PolyPC (Polymorphic Parallel Computing) framework, which targets enhancing productivity without losing performance. It helps designers develop parallelized applications and implement them on FPGAs. The PolyPC framework implements a custom hardware platform, on which programs written in an OpenCL-like programming model can launch. Additionally, the PolyPC framework extends vendor-provided tools to provide a complete development environment including intermediate software framework, and automatic system builders. Designers\u27 programs can be either synthesized as hardware processing elements (PEs) or compiled to executable files running on software PEs. Benefiting from nontrivial features of re-loadable PEs, and independent group-level schedulers, the multitasking is enabled for both software and hardware PEs to improve the efficiency of utilizing hardware resources. The PolyPC framework is evaluated regarding performance, area efficiency, and multitasking. The results show a maximum 66 times speedup over a dual-core ARM processor and 1043 times speedup over a high-performance MicroBlaze with 125 times of area efficiency. It delivers a significant improvement in response time to high-priority tasks with the priority-aware scheduling. Overheads of multitasking are evaluated to analyze trade-offs. With the help of the design flow, the OpenCL application programs are converted into executables through the front-end source-to-source transformation and back-end synthesis/compilation to run on PEs, and the framework is generated from users\u27 specifications

A Task-Graph Execution Manager for Reconfigurable Multi-tasking Systems

Reconfigurable hardware can be used to build multi tasking systems that dynamically adapt themselves to the requirements of the running applications. This is especially useful in embedded systems, since the available resources are very limited and the reconfigurable hardware can be reused for different applications. In these systems computations are frequently represented as task graphs that are executed taking into account their internal dependencies and the task schedule. The management of the task graph execution is critical for the system performance. In this regard, we have developed two dif erent versions, a software module and a hardware architecture, of a generic task-graph execution manager for reconfigurable multi-tasking systems. The second version reduces the run-time management overheads by almost two orders of magnitude. Hence it is especially suitable for systems with exigent timing constraints. Both versions include specific support to optimize the reconfiguration process