4,013 research outputs found
Autonomous 3D Exploration of Large Structures Using an UAV Equipped with a 2D LIDAR
This paper addressed the challenge of exploring large, unknown, and unstructured
industrial environments with an unmanned aerial vehicle (UAV). The resulting system combined
well-known components and techniques with a new manoeuvre to use a low-cost 2D laser to measure
a 3D structure. Our approach combined frontier-based exploration, the Lazy Theta* path planner, and
a flyby sampling manoeuvre to create a 3D map of large scenarios. One of the novelties of our system
is that all the algorithms relied on the multi-resolution of the octomap for the world representation.
We used a Hardware-in-the-Loop (HitL) simulation environment to collect accurate measurements
of the capability of the open-source system to run online and on-board the UAV in real-time. Our
approach is compared to different reference heuristics under this simulation environment showing
better performance in regards to the amount of explored space. With the proposed approach, the UAV
is able to explore 93% of the search space under 30 min, generating a path without repetition that
adjusts to the occupied space covering indoor locations, irregular structures, and suspended obstaclesUnión Europea Marie Sklodowska-Curie 64215Unión Europea MULTIDRONE (H2020-ICT-731667)Uniión Europea HYFLIERS (H2020-ICT-779411
Path planning and collision avoidance for autonomous surface vehicles I: a review
Autonomous surface vehicles are gaining increasing attention worldwide due to the potential benefits of improving safety and efficiency. This has raised the interest in developing methods for path planning that can reduce the risk of collisions, groundings, and stranding accidents at sea, as well as costs and time expenditure. In this paper, we review guidance, and more specifically, path planning algorithms of autonomous surface vehicles and their classification. In particular, we highlight vessel autonomy, regulatory framework, guidance, navigation and control components, advances in the industry, and previous reviews in the field. In addition, we analyse the terminology used in the literature and attempt to clarify ambiguities in commonly used terms related to path planning. Finally, we summarise and discuss our findings and highlight the potential need for new regulations for autonomous surface vehicles
A Consolidated Review of Path Planning and Optimization Techniques: Technical Perspectives and Future Directions
In this paper, a review on the three most important communication techniques (ground, aerial, and underwater vehicles) has been presented that throws light on trajectory planning, its optimization, and various issues in a summarized way. This kind of extensive research is not often seen in the literature, so an effort has been made for readers interested in path planning to fill the gap. Moreover, optimization techniques suitable for implementing ground, aerial, and underwater vehicles are also a part of this review. This paper covers the numerical, bio-inspired techniques and their hybridization with each other for each of the dimensions mentioned. The paper provides a consolidated platform, where plenty of available research on-ground autonomous vehicle and their trajectory optimization with the extension for aerial and underwater vehicles are documented
A COLLISION AVOIDANCE SYSTEM FOR AUTONOMOUS UNDERWATER VEHICLES
The work in this thesis is concerned with the development of a novel and practical collision
avoidance system for autonomous underwater vehicles (AUVs). Synergistically,
advanced stochastic motion planning methods, dynamics quantisation approaches,
multivariable tracking controller designs, sonar data processing and workspace representation,
are combined to enhance significantly the survivability of modern AUVs.
The recent proliferation of autonomous AUV deployments for various missions such
as seafloor surveying, scientific data gathering and mine hunting has demanded a substantial
increase in vehicle autonomy. One matching requirement of such missions is
to allow all the AUV to navigate safely in a dynamic and unstructured environment.
Therefore, it is vital that a robust and effective collision avoidance system should be
forthcoming in order to preserve the structural integrity of the vehicle whilst simultaneously
increasing its autonomy.
This thesis not only provides a holistic framework but also an arsenal of computational
techniques in the design of a collision avoidance system for AUVs. The
design of an obstacle avoidance system is first addressed. The core paradigm is the
application of the Rapidly-exploring Random Tree (RRT) algorithm and the newly
developed version for use as a motion planning tool. Later, this technique is merged
with the Manoeuvre Automaton (MA) representation to address the inherent disadvantages
of the RRT. A novel multi-node version which can also address time varying
final state is suggested. Clearly, the reference trajectory generated by the aforementioned
embedded planner must be tracked. Hence, the feasibility of employing the
linear quadratic regulator (LQG) and the nonlinear kinematic based state-dependent
Ricatti equation (SDRE) controller as trajectory trackers are explored.
The obstacle detection module, which comprises of sonar processing and workspace
representation submodules, is developed and tested on actual sonar data acquired
in a sea-trial via a prototype forward looking sonar (AT500). The sonar processing
techniques applied are fundamentally derived from the image processing perspective.
Likewise, a novel occupancy grid using nonlinear function is proposed for the
workspace representation of the AUV. Results are presented that demonstrate the
ability of an AUV to navigate a complex environment.
To the author's knowledge, it is the first time the above newly developed methodologies
have been applied to an A UV collision avoidance system, and, therefore, it is
considered that the work constitutes a contribution of knowledge in this area of work.J&S MARINE LT
- …