Energy Efficient Protocols for Delay Tolerant Networks

The delay tolerant networks (DTNs) is characterized by frequent disconnections and long delays of links among devices due to mobility, sparse deployment of devices, attacks, and noise, etc. Considerable research efforts have been devoted recently to DTNs enabling communications between network entities with intermittent connectivity. Unfortunately, mobile devices have limited energy capacity, and the fundamental problem is that traditional power-saving mechanisms are designed assuming well connected networks. Due to much larger inter-contact durations than contact durations, devices spend most of their life time in the neighbor discovery, and centralized power-saving strategies are difficult. Consequently, mobile devices consume a significant amount of energy in the neighbor discovery, rather than in infrequent data transfers. Therefore, distributed energy efficient neighbor discovery protocols for DTNs are essential to minimize the degradation of network connectivity and maximize the benefits from mobility. In this thesis, we develop sleep scheduling protocols in the medium access control (MAC) layer that are adaptive and distributed under different clock synchronization conditions: synchronous, asynchronous, and semi-asynchronous. In addition, we propose a distributed clock synchronization protocol to mitigate the clock synchronization problem in DTNs. Our research accomplishments are briefly outlined as follows: Firstly, we design an adaptive exponential beacon (AEB) protocol. By exploiting the trend of contact availability, beacon periods are independently adjusted by each device and optimized using the distribution of contact durations. The AEB protocol significantly reduces energy consumption while maintaining comparable packet delivery delay and delivery ratio. Secondly, we design two asynchronous clock based sleep scheduling (ACDS) protocols. Based on the fact that global clock synchronization is difficult to achieve in general, predetermined patterns of sleep schedules are constructed using hierarchical arrangements of cyclic difference sets such that devices independently selecting different duty cycle lengths are still guaranteed to have overlapping awake intervals with other devices within the communication range. Thirdly, we design a distributed semi-asynchronous sleep scheduling (DSA) protocol. Although the synchronization error is unavoidable, some level of clock accuracy may be possible for many practical scenarios. The sleep schedules are constructed to guarantee contacts among devices having loosely synchronized clocks, and parameters are optimized using the distribution of synchronization error. We also define conditions for which the proposed semi-asynchronous protocol outperforms existing asynchronous sleep scheduling protocols. Lastly, we design a distributed clock synchronization (DCS) protocol. The proposed protocol considers asynchronous and long delayed connections when exchanging relative clock information among nodes. As a result, smaller synchronization error achieved by the proposed protocol allows more accurate timing information and renders neighbor discovery more energy efficient. The designed protocols improve the lifetime of mobile devices in DTNs by means of energy efficient neighbor discoveries that reduce the energy waste caused by idle listening problems

Algorithms for Energy Efficiency in Wireless Sensor Networks

The recent advances in microsensor and semiconductor technology have opened a new field within computer science: the networking of small-sized sensors which are capable of sensing, processing, and communicating. Such wireless sensor networks offer new applications in the areas of habitat and environment monitoring, disaster control and operation, military and intelligence control, object tracking, video surveillance, traffic control, as well as in health care and home automation. It is likely that the deployed sensors will be battery-powered, which will limit the energy capacity significantly. Thus, energy efficiency becomes one of the main challenges that need to be taken into account, and the design of energy-efficient algorithms is a major contribution of this thesis. As the wireless communication in the network is one of the main energy consumers, we first consider in detail the characteristics of wireless communication. By using the embedded sensor board (ESB) platform recently developed by the Free University of Berlin, we analyze the means of forward error correction and propose an appropriate resync mechanism, which improves the communication between two ESB nodes substantially. Afterwards, we focus on the forwarding of data packets through the network. We present the algorithms energy-efficient forwarding (EEF), lifetime-efficient forwarding (LEF), and energy-efficient aggregation forwarding (EEAF). While EEF is designed to maximize the number of data bytes delivered per energy unit, LEF additionally takes into account the residual energy of forwarding nodes. In so doing, LEF further prolongs the lifetime of the network. Energy savings due to data aggregation and in-network processing are exploited by EEAF. Besides single-link forwarding, in which data packets are sent to only one forwarding node, we also study the impact of multi-link forwarding, which exploits the broadcast characteristics of the wireless medium by sending packets to several (potential) forwarding nodes. By actively selecting a forwarder among all nodes that received a packet successfully, retransmissions can often be avoided. In the majority of cases, multi-link forwarding is thus more efficient and able to save energy. In the last part of this thesis, we present a topology and energy control algorithm (TECA) to turn off the nodes' radio transceivers completely in order to avoid idle listening. By means of TECA, a connected backbone of active nodes is established, while all other nodes may sleep and save energy by turning off their radios. All algorithms presented in this thesis have been fully analyzed, simulated, and implemented on the ESB platform. They are suitable for several applications scenarios and can easily be adapted even to other wireless sensor platforms

Mobile Ad Hoc Networks

Guiding readers through the basics of these rapidly emerging networks to more advanced concepts and future expectations, Mobile Ad hoc Networks: Current Status and Future Trends identifies and examines the most pressing research issues in Mobile Ad hoc Networks (MANETs). Containing the contributions of leading researchers, industry professionals, and academics, this forward-looking reference provides an authoritative perspective of the state of the art in MANETs. The book includes surveys of recent publications that investigate key areas of interest such as limited resources and the mobility of mobile nodes. It considers routing, multicast, energy, security, channel assignment, and ensuring quality of service. Also suitable as a text for graduate students, the book is organized into three sections: Fundamentals of MANET Modeling and Simulation—Describes how MANETs operate and perform through simulations and models Communication Protocols of MANETs—Presents cutting-edge research on key issues, including MAC layer issues and routing in high mobility Future Networks Inspired By MANETs—Tackles open research issues and emerging trends Illustrating the role MANETs are likely to play in future networks, this book supplies the foundation and insight you will need to make your own contributions to the field. It includes coverage of routing protocols, modeling and simulations tools, intelligent optimization techniques to multicriteria routing, security issues in FHAMIPv6, connecting moving smart objects to the Internet, underwater sensor networks, wireless mesh network architecture and protocols, adaptive routing provision using Bayesian inference, and adaptive flow control in transport layer using genetic algorithms

Quality of service aware data dissemination in vehicular Ad Hoc networks

Des systèmes de transport intelligents (STI) seront éventuellement fournis dans un proche avenir pour la sécurité et le confort des personnes lors de leurs déplacements sur les routes. Les réseaux ad-hoc véhiculaires (VANETs) représentent l'élément clé des STI. Les VANETs sont formés par des véhicules qui communiquent entre eux et avec l'infrastructure. En effet, les véhicules pourront échanger des messages qui comprennent, par exemple, des informations sur la circulation routière, les situations d'urgence et les divertissements. En particulier, les messages d'urgence sont diffusés par des véhicules en cas d'urgence (p.ex. un accident de voiture); afin de permettre aux conducteurs de réagir à temps (p.ex., ralentir), les messages d'urgence doivent être diffusés de manière fiable dans un délai très court. Dans les VANETs, il existe plusieurs facteurs, tels que le canal à pertes, les terminaux cachés, les interférences et la bande passante limitée, qui compliquent énormément la satisfaction des exigences de fiabilité et de délai des messages d'urgence. Dans cette thèse, en guise de première contribution, nous proposons un schéma de diffusion efficace à plusieurs sauts, appelé Dynamic Partitioning Scheme (DPS), pour diffuser les messages d'urgence. DPS calcule les tailles de partitions dynamiques et le calendrier de transmission pour chaque partition; à l'intérieur de la zone arrière de l'expéditeur, les partitions sont calculées de sorte qu'en moyenne chaque partition contient au moins un seul véhicule; l'objectif est de s'assurer que seul un véhicule dans la partition la plus éloignée (de l'expéditeur) est utilisé pour diffuser le message, jusqu'au saut suivant; ceci donne lieu à un délai d'un saut plus court. DPS assure une diffusion rapide des messages d'urgence. En outre, un nouveau mécanisme d'établissement de liaison, qui utilise des tonalités occupées, est proposé pour résoudre le problème du problème de terminal caché. Dans les VANETs, la Multidiffusion, c'est-à-dire la transmission d'un message d'une source à un nombre limité de véhicules connus en tant que destinations, est très importante. Par rapport à la diffusion unique, avec Multidiffusion, la source peut simultanément prendre en charge plusieurs destinations, via une arborescence de multidiffusion, ce qui permet d'économiser de la bande passante et de réduire la congestion du réseau. Cependant, puisque les VANETs ont une topologie dynamique, le maintien de la connectivité de l'arbre de multidiffusion est un problème majeur. Comme deuxième contribution, nous proposons deux approches pour modéliser l'utilisation totale de bande passante d'une arborescence de multidiffusion: (i) la première approche considère le nombre de segments de route impliqués dans l'arbre de multidiffusion et (ii) la seconde approche considère le nombre d'intersections relais dans l'arbre de multidiffusion. Une heuristique est proposée pour chaque approche. Pour assurer la qualité de service de l'arbre de multidiffusion, des procédures efficaces sont proposées pour le suivi des destinations et la surveillance de la qualité de service des segments de route. Comme troisième contribution, nous étudions le problème de la congestion causée par le routage du trafic de données dans les VANETs. Nous proposons (1) une approche de routage basée sur l’infonuagique qui, contrairement aux approches existantes, prend en compte les chemins de routage existants qui relaient déjà les données dans les VANETs. Les nouvelles demandes de routage sont traitées de sorte qu'aucun segment de route ne soit surchargé par plusieurs chemins de routage croisés. Au lieu d'acheminer les données en utilisant des chemins de routage sur un nombre limité de segments de route, notre approche équilibre la charge des données en utilisant des chemins de routage sur l'ensemble des tronçons routiers urbains, dans le but d'empêcher, dans la mesure du possible, les congestions locales dans les VANETs; et (2) une approche basée sur le réseau défini par logiciel (SDN) pour surveiller la connectivité VANET en temps réel et les délais de transmission sur chaque segment de route. Les données de surveillance sont utilisées en entrée de l'approche de routage.Intelligent Transportation Systems (ITS) will be eventually provided in the near future for both safety and comfort of people during their travel on the roads. Vehicular ad-hoc Networks (VANETs), represent the key component of ITS. VANETs consist of vehicles that communicate with each other and with the infrastructure. Indeed, vehicles will be able to exchange messages that include, for example, information about road traffic, emergency situations, and entertainment. Particularly, emergency messages are broadcasted by vehicles in case of an emergency (e.g., car accident); in order to allow drivers to react in time (e.g., slow down), emergency messages must be reliably disseminated with very short delay. In VANETs, there are several factors, such as lossy channel, hidden terminals, interferences and scarce bandwidth, which make satisfying reliability and delay requirements of emergency messages very challenging. In this thesis, as the first contribution, we propose a reliable time-efficient and multi-hop broadcasting scheme, called Dynamic Partitioning Scheme (DPS), to disseminate emergency messages. DPS computes dynamic partition sizes and the transmission schedule for each partition; inside the back area of the sender, the partitions are computed such that in average each partition contains at least a single vehicle; the objective is to ensure that only a vehicle in the farthest partition (from the sender) is used to disseminate the message, to next hop, resulting in shorter one hop delay. DPS ensures fast dissemination of emergency messages. Moreover, a new handshaking mechanism, that uses busy tones, is proposed to solve the problem of hidden terminal problem. In VANETs, Multicasting, i.e. delivering a message from a source to a limited known number of vehicles as destinations, is very important. Compared to Unicasting, with Multicasting, the source can simultaneously support multiple destinations, via a multicast tree, saving bandwidth and reducing overall communication congestion. However, since VANETs have a dynamic topology, maintaining the connectivity of the multicast tree is a major issue. As the second contribution, we propose two approaches to model total bandwidth usage of a multicast tree: (i) the first approach considers the number of road segments involved in the multicast tree and (ii) the second approach considers the number of relaying intersections involved in the multicast tree. A heuristic is proposed for each approach. To ensure QoS of the multicasting tree, efficient procedures are proposed for tracking destinations and monitoring QoS of road segments. As the third contribution, we study the problem of network congestion in routing data traffic in VANETs. We propose (1) a Cloud-based routing approach that, in opposition to existing approaches, takes into account existing routing paths which are already relaying data in VANETs. New routing requests are processed such that no road segment gets overloaded by multiple crossing routing paths. Instead of routing over a limited set of road segments, our approach balances the load of communication paths over the whole urban road segments, with the objective to prevent, whenever possible, local congestions in VANETs; and (2) a Software Defined Networking (SDN) based approach to monitor real-time VANETs connectivity and transmission delays on each road segment. The monitoring data is used as input to the routing approach

Mobile Ad Hoc Networks

Guiding readers through the basics of these rapidly emerging networks to more advanced concepts and future expectations, Mobile Ad hoc Networks: Current Status and Future Trends identifies and examines the most pressing research issues in Mobile Ad hoc Networks (MANETs). Containing the contributions of leading researchers, industry professionals, and academics, this forward-looking reference provides an authoritative perspective of the state of the art in MANETs. The book includes surveys of recent publications that investigate key areas of interest such as limited resources and the mobility of mobile nodes. It considers routing, multicast, energy, security, channel assignment, and ensuring quality of service. Also suitable as a text for graduate students, the book is organized into three sections: Fundamentals of MANET Modeling and Simulation—Describes how MANETs operate and perform through simulations and models Communication Protocols of MANETs—Presents cutting-edge research on key issues, including MAC layer issues and routing in high mobility Future Networks Inspired By MANETs—Tackles open research issues and emerging trends Illustrating the role MANETs are likely to play in future networks, this book supplies the foundation and insight you will need to make your own contributions to the field. It includes coverage of routing protocols, modeling and simulations tools, intelligent optimization techniques to multicriteria routing, security issues in FHAMIPv6, connecting moving smart objects to the Internet, underwater sensor networks, wireless mesh network architecture and protocols, adaptive routing provision using Bayesian inference, and adaptive flow control in transport layer using genetic algorithms

Contribution to the improvement of the performance of wireless mesh networks providing real time services

Nowadays, people expectations for ubiquitous connectivity is continuously growing. Cities are now moving towards the smart city paradigm. Electricity companies aims to become part of smart grids. Internet is no longer exclusive for humans, we now assume the Internet of everything. We consider that Wireless Mesh Networks (WMNs) have a set of valuable features that will make it an important part of such environments. WMNs can also be use in less favored areas thanks to their low-cost deployment. This is socially relevant since it facilitates the digital divide reduction and could help to improve the population quality of life. Research and industry have been working these years in open or proprietary mesh solutions. Standardization efforts and real deployments establish a solid starting point.We expect that WMNs will be a supporting part for an unlimited number of new applications from a variety of fields: community networking, intelligent transportation systems, health systems, public safety, disaster management, advanced metering, etc. For all these cases, the growing needs of users for real-time and multimedia information is currently evident. On this basis, this thesis proposes a set of contributions to improve the performance of an application service of such type and to promote the better use of two critical resources (memory and energy) of WMNs.For the offered service, this work focuses on a Video on Demand (VoD) system. One of the requirements of this system is the high capacity support. This is mainly achieved by distributing the video contents among various distribution points which in turn consist of several video servers. Each client request that arrives to such video server cluster must be handled by a specific server in a way that the load is balanced. For such task, this thesis proposes a mechanism to appropriately select a specific video server such that the transfer time at the cluster could be minimized.On the other hand, mesh routers that creates the mesh backbone are equipped with multiple interfaces from different technologies and channel types. An important resource is the amount of memory intended for buffers. The quality of service perceived by the users are largely affected by the size of such buffers. This is because important network performance parameters such as packet loss probability, delay, and channel utilization are highly affected by the buffer sizes. An efficient use of memory for buffering, in addition to facilitate the mesh devices scalability, also prevents the problems associated with excessively large buffers. Most of the current works associate the buffer sizing problem with the dynamics of TCP congestion control mechanism. Since this work focuses on real time services, in which the use of TCP is unfeasible, this thesis proposes a dynamic buffer sizing mechanism mainly dedicated for such real time flows. The approach is based on the maximum entropy principle and allows that each device be able to dynamically self-configure its buffers to achieve more efficient memory utilization. The proper performance of the proposal has been extensively evaluated in wired and wireless interfaces. Classical infrastructure-based wireless and multi-hop mesh interfaces have been considered. Finally, when the WMN is built by the interconnection of user hand-helds, energy is a limited and scarce resource, and therefore any approach to optimize its use is valuable. For this case, this thesis proposes a topology control mechanism based on centrality metrics. The main idea is that, instead of having all the devices executing routing functionalities, just a subset of nodes are selected for this task. We evaluate different centralities, form both centralized and distributed perspectives. In addition to the common random mobility models we include the analysis of the proposal with a socially-aware mobility model that generates networks with a community structure.Actualmente las expectativas de las personas de una conectividad ubicua están creciendo. Las ciudades están trabajando para alcanzar el paradigma de ciudades inteligentes. Internet ha dejado de ser exclusivo de las personas y ahora se asume el Internet de todo. Las redes inalámbricas de malla (WMNs) poseen un valioso conjunto de características que las harán parte importante de tales entornos. Las WMNs pueden utilizarse en zonas menos favorecidas debido a su despliegue económico. Esto es socialmente relevante ya que facilita la reducción de la brecha digital y puede ayudar a mejorar la calidad de vida de la población. Los esfuerzos de estandarización y los despliegues de redes reales establecen un punto de partida sólido.Se espera entonces, que las WMNs den soporte a un número importante de nuevas aplicaciones y servicios, de una variedad de campos: redes comunitarias, sistemas de transporte inteligente, sistemas de salud y seguridad, operaciones de rescate y de emergencia, etc. En todos estos casos, es evidente la necesidad de disponer de información multimedia y en tiempo real. En base a estos precedentes, esta tesis propone un conjunto de contribuciones para mejorar el funcionamiento de un servicio de este tipo y promover un uso eficiente de dos recursos críticos (memoria y energía) de las WMNs.Para el servicio ofrecido, este trabajo se centra en un sistema de video bajo demanda. Uno de los requisitos de estos sistemas es el de soportar capacidades elevadas. Esto se consigue principalmente distribuyendo los contenidos de video entre diferentes puntos de distribución, los cuales a su vez están formados por varios servidores. Cada solicitud de un cliente que llega a dicho conjunto de servidores debe ser manejada por un servidor específico, de tal forma que la carga sea balanceada. Para esta tarea, esta tesis propone un mecanismo que selecciona apropiadamente un servidor de tal manera que el tiempo de transferencia del sistema sea minimizado.Por su parte, los enrutadores de malla que crean la red troncal están equipados con múltiples interfaces de diferentes tecnologías y tipos de canal. Un recurso muy importante para éstos es la memoria destinada a sus colas. La calidad de servicio percibida por los usuarios está altamente influenciada por el tamaño de las colas. Esto porque parámetros importantes del rendimiento de la red como la probabilidad de pérdida de paquetes, el retardo, y la utilización del canal se ven afectados por dicho tamaño. Un uso eficiente de tal memoria, a más de facilitar la escalabilidad de los equipos, también evita los problemas asociados a colas muy largas. La mayoría de los trabajos actuales asocian el problema de dimensionamiento de las colas con la dinámica del mecanismo de control de congestión de TCP. Debido a que este trabajo se enfoca en servicios en tiempo real, en los cuales no es factible usar TCP, esta tesis propone un mecanismo de dimensionamiento dinámico de colas dedicado principalmente a flujos en tiempo real. La propuesta está basada en el principio de máxima entropía y permite que los dispositivos sean capaces de auto-configurar sus colas y así lograr un uso más eficiente de la memoria. Finalmente, cuando la WMN se construye a través de la interconexión de los dispositivos portátiles, la energía es un recurso limitado y escaso, y cualquier propuesta para optimizar su uso es muy valorada. Para esto, esta tesis propone un mecanismo de control de topología basado en métricas de centralidad. La idea principal es que en lugar de que todos los dispositivos realicen funciones de enrutamiento, solo un subconjunto de nodos es seleccionado para esta tarea. Se evalúan diferentes métricas, desde una perspectiva centralizada y otra distribuida. A más de los modelos aleatorios clásicos de movilidad, se incluye el análisis de la propuesta con modelos de movilidad basados en información social que toman en cuenta el comportamiento humano y generan redes con una clara estructura de comunidade

Mobile Ad-Hoc Networks

Being infrastructure-less and without central administration control, wireless ad-hoc networking is playing a more and more important role in extending the coverage of traditional wireless infrastructure (cellular networks, wireless LAN, etc). This book includes state-of the-art techniques and solutions for wireless ad-hoc networks. It focuses on the following topics in ad-hoc networks: vehicular ad-hoc networks, security and caching, TCP in ad-hoc networks and emerging applications. It is targeted to provide network engineers and researchers with design guidelines for large scale wireless ad hoc networks

System support for client-server based interactive applications in ad hoc networks

With the emergence of wireless communications and mobile computing. new ways for people to interact with each other and their surrounding environment are emerging. Mobile devices, such as Personal Digital Assistants (PDAs) with wireless communication interfaces are able to communicate directly with each other if they are "close enough". If such devices are also able to act as message relays (routers), then a very powerful facility in the form of a mobile ad hoc network can be made available to applications. Although present day PDAs have sufficient networking and processing capabilities to support interesting interactive applications, as yet, there is hardly any software available for constructing and maintaining ad hoc networks and not many practical interactive applications have been built and tested. Rather, much of the research work is still at simulation and modelling stage. Thus it is difficult at this stage to decide what system support (middleware) for interactive applications a PDA should contain. This work is a step in the direction of remedying the situation by considering a class of applications where interactions between users can be supported by one of the nodes in the ad hoc network acting as a server. The thesis presents the design, implementation and evaluation of three such applications on PDAs, and based on that experience, describes what system support (middleware) for such applications is required. These applications are: Auction, Bingo game and Chatting that work over ad hoc networks. The work presented here can be used as a basis for deciding how the current generation of PDA operating systems can be extended for supporting ad hoc networking and what additional services are required for interactive applications.EThOS - Electronic Theses Online ServiceGBUnited Kingdo

Intelligent Circuits and Systems

ICICS-2020 is the third conference initiated by the School of Electronics and Electrical Engineering at Lovely Professional University that explored recent innovations of researchers working for the development of smart and green technologies in the fields of Energy, Electronics, Communications, Computers, and Control. ICICS provides innovators to identify new opportunities for the social and economic benefits of society.　 This conference bridges the gap between academics and R&D institutions, social visionaries, and experts from all strata of society to present their ongoing research activities and foster research relations between them. It provides opportunities for the exchange of new ideas, applications, and experiences in the field of smart technologies and finding global partners for future collaboration. The ICICS-2020 was conducted in two broad categories, Intelligent Circuits & Intelligent Systems and Emerging Technologies in Electrical Engineering