1,378 research outputs found
Building Blocks for Adaptive Modular Sensing Systems
This thesis contributes towards the development of systems and strategies by which sensor and actuator components can be combined to produce flexible and robust sensor systems for a given application. A set of intelligent modular blocks (building blocks) have been created from which composite sensors (made up of multiple sensor and actuator components) can be rapidly reconfigured for the construction of Adaptive Modular Sensing Systems. The composite systems are expected to prove useful in several application domains including industrial control, inspection systems, mobile robotics, monitoring and data acquisition. The intelligent building blocks, referred to as transducer interface modules, contain embedded knowledge about their capabilities and how they can interact with other modules. These modules encapsulate a general purpose modular hardware architecture that provides an interface between the sensors, the actuators, and the communication medium. The geometry of each transducer interface module is a cube. A connector mechanism implemented on each face of the module enables physical connection of the modules. Each module provides a core functionality and can be connected to other modules to form more capable composite sensors. Once the modules are combined, the capabilities (e.g., range, resolution, sample rate, etc.) and functionality (e.g., temperature measurement) of the composite sensor is determined and communicated to other sensors in the enviornment. For maximum flexibility, a distributed software architecture is executed on the blocks to enable automatic acquisition of configuration-specific algorithms. This logical algorithm imparts a collective identity to the composite group, and processes data based on the capabilities and functionalities of the transducers present in the system. A knowledge representation scheme allows each module in the composite group to store and communicate its functionality and capabilities to other connected modules in the system
Application of advanced technology to space automation
Automated operations in space provide the key to optimized mission design and data acquisition at minimum cost for the future. The results of this study strongly accentuate this statement and should provide further incentive for immediate development of specific automtion technology as defined herein. Essential automation technology requirements were identified for future programs. The study was undertaken to address the future role of automation in the space program, the potential benefits to be derived, and the technology efforts that should be directed toward obtaining these benefits
Wireless distributed intelligence in personal applications
Tietokoneet ovat historian kuluessa kehittyneet keskustietokoneista hajautettujen, langattomasti toimivien järjestelmien suuntaan. Elektroniikalla toteutetut automaattiset toiminnot ympärillämme lisääntyvät kiihtyvällä vauhdilla. Tällaiset sovellukset lisääntyvät tulevaisuudessa, mutta siihen soveltuva tekniikka on vielä kehityksen alla ja vaadittavia ominaisuuksia ei aina löydy. Nykyiset lyhyen kantaman langattoman tekniikan standardit ovat tarkoitettu lähinnä teollisuuden ja multimedian käyttöön, siksi ne ovat vain osittain soveltuvia uudenlaisiin ympäristöälykkäisiin käyttötarkoituksiin.
Ympäristöälykkäät sovellukset palvelevat enimmäkseen jokapäiväistä elämäämme, kuten turvallisuutta, kulunvalvontaa ja elämyspalveluita. Ympäristöälykkäitä ratkaisuja tarvitaan myös hajautetussa automaatiossa ja kohteiden automaattisessa seurannassa.
Tutkimuksen aikana Seinäjoen ammattikorkeakoulussa on tutkittu lyhyen kantaman langatonta tekniikkaa: suunniteltu ja kehitetty pienivirtaisia radionappeja, niitten ohjelmointiympäristöä sekä langattoman verkon synkronointia, tiedonkeruuta ja reititystä. Lisäksi on simuloitu eri reititystapoja, sisäpaikannusta ja kaivinkoneen kalibrointia soveltaen mm. neurolaskentaa. Tekniikkaa on testattu myös käytännön sovelluksissa.
Ympäristöälykkäät sovellusalueet ovat ehkä nopeimmin kasvava lähitulevaisuuden ala tietotekniikassa. Tutkitulla tekniikalla on runsaasti uusia haasteita ihmisten hyvinvointia, terveyttä ja turvallisuutta lisäävissä sovelluksissa, kuten myös teollisuuden uusissa sovelluksissa, esimerkiksi älykkäässä energiansiirtoverkossa.The development of computing is moving from mainframe computers to distributed intelligence with wireless features. The automated functions around us, in the form of small electronic devices, are increasing and the pace is continuously accelerating. The number of these applications will increase in the future, but suitable features needed are lacking and suitable technology development is still ongoing. The existing wireless short-range standards are mostly suitable for use in industry and in multimedia applications, but they are only partly suitable for the new network feature demands of the ambient intelligence applications.
The ambient intelligent applications will serve us in our daily lives: security, access control and exercise services. Ambient intelligence is also adopted by industry in distributed amorphous automation, in access monitoring and the control of machines and devices.
During this research, at Seinäjoki University of Applied Sciences, we have researched, designed and developed short-range wireless technology: low-power radio buttons with a programming environment for them as well as synchronization, data collecting and routing features for the wireless network. We have simulated different routing methods, indoor positioning and excavator calibration using for example neurocomputing. In addition, we have tested the technology in practical applications.
The ambient intelligent applications are perhaps the area growing the most in information technology in the future. There will be many new challenges to face to increase welfare, health, security, as well as industrial applications (for example, at factories and in smart grids) in the future.fi=vertaisarvioitu|en=peerReviewed
Platform-based design, test and fast verification flow for mixed-signal systems on chip
This research is providing methodologies to enhance the design phase from architectural space exploration and system study to verification of the whole mixed-signal system. At the beginning of the work, some innovative digital IPs have been designed to develop efficient signal conditioning for sensor systems on-chip that has been included in commercial products. After this phase, the main focus has been addressed to the creation of a re-usable and versatile test of the device after the tape-out which is close to become one of the major cost factor for ICs companies, strongly linking it to model’s test-benches to avoid re-design phases and multi-environment scenarios, producing a very effective approach to a single, fast and reliable multi-level verification environment. All these works generated different publications in scientific literature.
The compound scenario concerning the development of sensor systems is presented in Chapter 1, together with an overview of the related market with a particular focus on the latest MEMS and MOEMS technology devices, and their applications in various segments.
Chapter 2 introduces the state of the art for sensor interfaces: the generic sensor interface concept (based on sharing the same electronics among similar applications achieving cost saving at the expense of area and performance loss) versus the Platform Based Design methodology, which overcomes the drawbacks of the classic solution by keeping the generality at the highest design layers and customizing the platform for a target sensor achieving optimized performances. An evolution of Platform Based Design achieved by implementation into silicon of the ISIF (Intelligent Sensor InterFace) platform is therefore presented. ISIF is a highly configurable mixed-signal chip which allows designers to perform an effective design space exploration and to evaluate directly on silicon the system performances avoiding the critical and time consuming analysis required by standard platform based approach.
In chapter 3 we describe the design of a smart sensor interface for conditioning next generation MOEMS. The adoption of a new, high performance and high integrated technology allow us to integrate not only a versatile platform but also a powerful ARM processor and various IPs providing the possibility to use the platform not only as a conditioning platform but also as a processing unit for the application. In this chapter a description of the various blocks is given, with a particular emphasis on the IP developed in order to grant the highest grade of flexibility with the minimum area occupation.
The architectural space evaluation and the application prototyping with ISIF has enabled an effective, rapid and low risk development of a new high performance platform achieving a flexible sensor system for MEMS and MOEMS monitoring and conditioning. The platform has been design to cover very challenging test-benches, like a laser-based projector device. In this way the platform will not only be able to effectively handle the sensor but also all the system that can be built around it, reducing the needed for further electronics and resulting in an efficient test bench for the algorithm developed to drive the system.
The high costs in ASIC development are mainly related to re-design phases because of missing complete top-level tests. Analog and digital parts design flows are separately verified. Starting from these considerations, in the last chapter a complete test environment for complex mixed-signal chips is presented. A semi-automatic VHDL-AMS flow to provide totally matching top-level is described and then, an evolution for fast self-checking test development for both model and real chip verification is proposed. By the introduction of a Python interface, the designer can easily perform interactive tests to cover all the features verification (e.g. calibration and trimming) into the design phase and check them all with the same environment on the real chip after the tape-out. This strategy has been tested on a consumer 3D-gyro for consumer application, in collaboration with SensorDynamics AG
Recommended from our members
A service orientated architecture and wireless sensor network approach applied to the measurement and visualisation of a micro injection moulding process. Design, development and testing of an ESB based micro injection moulding platform using Google Gadgets and business processes for the integration of disparate hardware systems on the factory shop floor
Factory shop floors of the future will see a significant increase in interconnected devices for monitoring and control. However, if a Service Orientated Architecture (SOA) is implemented on all such devices then this will result in a large number of permutations of services and composite services. These services combined with other business level components can pose a huge challenge to manage as it is often difficult to keep an overview of all the devices, equipment and services. This thesis proposes an SOA based novel assimilation architecture for integrating disparate industrial hardware based processes and business processes of an enterprise in particular the plastics machinery environment. The key benefits of the proposed architecture are the reduction of complexity when integrating disparate hardware platforms; managing the associated services as well as allowing the Micro Injection Moulding (µIM) process to be monitored on the web through service and data integration. An Enterprise Service Bus (ESB) based middleware layer integrates the Wireless Sensor Network (WSN) based environmental and simulated machine process systems with frontend Google Gadgets (GGs) based web visualisation applications. A business process framework is proposed to manage and orchestrate the resulting services from the architecture.
Results from the analysis of the WSN kits in terms of their usability and reliability showed that the Jennic WSN was easy to setup and had a reliable communication link in the polymer industrial environment with the PER being below 0.5%. The prototype Jennic WSN based µIM process monitoring system had limitations when monitoring high-resolution machine data, therefore a novel hybrid integration architecture was proposed. The assimilation architecture was implemented on a distributed server based test bed. Results from test scenarios showed that the architecture was highly scalable and could potentially allow a large number of disparate sensor based hardware systems and services to be hosted, managed, visualised and linked to form a cohesive business process
Developing a Framework for a Configuration of an Irrigation System for Small-scale Farmers
Industrial Engineerin
Advanced sensors technology survey
This project assesses the state-of-the-art in advanced or 'smart' sensors technology for NASA Life Sciences research applications with an emphasis on those sensors with potential applications on the space station freedom (SSF). The objectives are: (1) to conduct literature reviews on relevant advanced sensor technology; (2) to interview various scientists and engineers in industry, academia, and government who are knowledgeable on this topic; (3) to provide viewpoints and opinions regarding the potential applications of this technology on the SSF; and (4) to provide summary charts of relevant technologies and centers where these technologies are being developed
Space transportation system and associated payloads: Glossary, acronyms, and abbreviations
A collection of some of the acronyms and abbreviations now in everyday use in the shuttle world is presented. It is a combination of lists that were prepared at Marshall Space Flight Center and Kennedy and Johnson Space Centers, places where intensive shuttle activities are being carried out. This list is intended as a guide or reference and should not be considered to have the status and sanction of a dictionary
Low-Power Pıc-Based Sensor Node Devıce Desıgn And Theoretıcal Analysıs Of Energy Consumptıon In Wıreless Sensor Networks
Teknolojinin ilerlemesi, daha enerji verimli ve daha ucuz elektronik bileşenlerinin daha
küçük üretilmesini sağlamıştır. Bu nedenle, daha önce mevcut birçok bilgisayar ve elektronik
bilim-mühendislik fikirleri uygulanabilir hale gelmiştir. Bunlardan birisi de kablosuz sensör
ağları teknolojisidir. Kablosuz algılayıcı ağlar, düşük enerji tüketimi ve gerekli teknik
gereksinimlerin gerçekleşmesi ile uygulanabilir hale gelmiştir. Ayrıca, Kablosuz algılayıcı
ağlarının tasarımında iletişim algoritmaları, enerji tasarruf protokolleri ve yenilenebilir enerji
teknolojileri gibi diğer bilimsel çalışmalar zorunlu hale gelmiştir.
Bu tez, mikroelektronik sistemler, kablosuz iletişim ve dijital elektronik teknolojisinin
ilerlemesiyle uygulanabilir hale gelmiş sensör ağları teknolojisini kapsamaktadır. Birincisi,
algılama görevleri ve potansiyel algılayıcı ağ uygulamaları araştırılmış ve algılayıcı ağlarının
tasarımını etkileyen faktörlerin gözden geçirilmesi sağlanmıştır. Ardından sensör ağları için
iletişim mimarisi ana hatlarıyla belirtilmiştir. Ayrıca, tek bir düğümün WLAN ile iletişim
kurabilmesi için yeni donanım mimarisi tasarlanmış ve düğümlerde yenilenebilir enerji
kaynakları kullanılmıştır.
Bu tezde WSN, analitik bilim ve uygulamalı bilim açısından incelenmiştir. Düşük enerji
tüketimi ve iletişim protokolleri arasındaki ilişki değerlendirilmiş ve bilimsel sonuçlara
varılmıştır. Teorik analizler bilimsel uygulamalarla desteklenmiştir. Çalışmalar, düşük enerji
ve maksimum verimlilik prensibinin gerçekleştirilmesine dayalı kablosuz sensör ağları
üzerinde gerçekleştirilmiştir. Kablosuz sensör ağlari sistemi tasarlandıktan sonra; sensör
düğümlerinin enerji tüketimi ve kablosuz ağdaki davranışları test ve analiz edilmiştir. Düşük
enerji tüketimi ile sensör düğümleri arasındaki ilişki detaylı olarak değerlendirilmiştir.
PIC Tabanlı mikro denetleyiciler sensör düğümlerinin tasarımında kullanılmış ve çok
düşük maliyetli tasarım için ultra düşük güçte, nanoWatt teknolojisi ile desteklenen sensör
düğümleri tasarlanmıştır. İşleme birimi, bellek birimi ve kablosuz iletişim birimi sensör
viii
düğümlerine entegre edilmiştir. Tasarlanan sensör düğümünün işletim sistemi PIC C dili ile
yazılmıştır ve PIC işletim sistemi nem, sıcaklık, ışığa duyarlılık ve duman sensörü gibi farklı
özelliklerin ölçülmesine izin vermiştir. Sensörlerden gelen verilerin merkezi bir konumdan
kaydedilmesi ve izlenebilmesi için, C# programlama dili ile bilgisayar yazılımı geliştirilmiştir.
Gelişmiş algılayıcı düğümler tarafından alınan kararların uygulanması için yazılım
algoritması ve donanım modüllerini içeren karar verme sistemi tasarlanmıştır. Gelişmiş PIC
Tabanlı sensör düğümleri, enerji üretimi ve enerji tasarrufu için, güneş enerjisi paneli, şarj
edilebilir pil ve süper kapasitör gibi yenilenebilir enerji kaynakları ile benzersiz bir PIC
Kontrollü voltaj birimi ile desteklenmiştir. Geliştirilmiş kablosuz sensör ağları sistemi, endüstri
uygulamaları, akıllı fabrikalar ve akıllı evler gibi günlük hayat uygulamaları için de
kullanılabilecektir. Kablosuz algılayıcı ağlar geniş bir aralıkta kullanılmak üzere tasarlanmıştır.
Tezin sonuçları, özellikle yenilenebilir enerji kaynakları ile WSN'nin geliştirilmesine yardımcı
olmayı amaçlamaktadır
Wireless Sensor Data Logging System Design
Wireless Sensor Data Logging System Design is a standalone electronic
sensor device that captures and stores data through wireless communication. This
system comprises two main integrated components; the Radio Frequency module
and the Microcontroller based system. The main goal of this project is to design
and construct a data logging system that effectively monitors the device's
measurement values. In real life applications, most data monitoring system is a
passive system. This type of system requires manned guarding on site to manage
the devices. Therefore, a standalone data logging system offers a better
enhancement system to replace the manned guarding method. The standalone data
logger system can be applied by leaving the device alone in any place that
requires the measurement of humidity and temperature. These data can be
retrieved from EEPROM and transferred to a PC whenever needed by a user. A
radio frequency module enables these data travels through wireless transmission
medium, whereas the serial communication interface enables communication
between the devices and PC. For diverse applications, an alarm system can be
implemented if assets and security are the major concerns. The final report
presents the development of a data logger system which is an integration of radio
frequency module and the microcontroller-based system. The system monitors the
device's measurement value via a Graphical User Interface. Basically, the system
introduces a RF module to replace the hard wired scheme and produce a dynamic
data transmission system. It is geared up with a PICI6F877A microcontroller to
drive the outputs besides providing communication between devices and a PC.
Overall, the project is the best platform to improve the traditional monitoring
system and ignites another innovative invention in the future
- …