3,661 research outputs found
A General Framework for Transmission with Transceiver Distortion and Some Applications
A general theoretical framework is presented for analyzing information
transmission over Gaussian channels with memoryless transceiver distortion,
which encompasses various nonlinear distortion models including transmit-side
clipping, receive-side analog-to-digital conversion, and others. The framework
is based on the so-called generalized mutual information (GMI), and the
analysis in particular benefits from the setup of Gaussian codebook ensemble
and nearest-neighbor decoding, for which it is established that the GMI takes a
general form analogous to the channel capacity of undistorted Gaussian
channels, with a reduced "effective" signal-to-noise ratio (SNR) that depends
on the nominal SNR and the distortion model. When applied to specific
distortion models, an array of results of engineering relevance is obtained.
For channels with transmit-side distortion only, it is shown that a
conventional approach, which treats the distorted signal as the sum of the
original signal part and a uncorrelated distortion part, achieves the GMI. For
channels with output quantization, closed-form expressions are obtained for the
effective SNR and the GMI, and related optimization problems are formulated and
solved for quantizer design. Finally, super-Nyquist sampling is analyzed within
the general framework, and it is shown that sampling beyond the Nyquist rate
increases the GMI for all SNR. For example, with a binary symmetric output
quantization, information rates exceeding one bit per channel use are
achievable by sampling the output at four times the Nyquist rate.Comment: 32 pages (including 4 figures, 5 tables, and auxiliary materials);
submitted to IEEE Transactions on Communication
Towards a Realistic Assessment of Multiple Antenna HCNs: Residual Additive Transceiver Hardware Impairments and Channel Aging
Given the critical dependence of broadcast channels by the accuracy of
channel state information at the transmitter (CSIT), we develop a general
downlink model with zero-forcing (ZF) precoding, applied in realistic
heterogeneous cellular systems with multiple antenna base stations (BSs).
Specifically, we take into consideration imperfect CSIT due to pilot
contamination, channel aging due to users relative movement, and unavoidable
residual additive transceiver hardware impairments (RATHIs). Assuming that the
BSs are Poisson distributed, the main contributions focus on the derivations of
the upper bound of the coverage probability and the achievable user rate for
this general model. We show that both the coverage probability and the user
rate are dependent on the imperfect CSIT and RATHIs. More concretely, we
quantify the resultant performance loss of the network due to these effects. We
depict that the uplink RATHIs have equal impact, but the downlink transmit BS
distortion has a greater impact than the receive hardware impairment of the
user. Thus, the transmit BS hardware should be of better quality than user's
receive hardware. Furthermore, we characterise both the coverage probability
and user rate in terms of the time variation of the channel. It is shown that
both of them decrease with increasing user mobility, but after a specific value
of the normalised Doppler shift, they increase again. Actually, the time
variation, following the Jakes autocorrelation function, mirrors this effect on
coverage probability and user rate. Finally, we consider space division
multiple access (SDMA), single user beamforming (SU-BF), and baseline
single-input single-output (SISO) transmission. A comparison among these
schemes reveals that the coverage by means of SU-BF outperforms SDMA in terms
of coverage.Comment: accepted in IEEE TV
Agile Calibration Process of Full-Stack Simulation Frameworks for V2X Communications
Computer simulations and real-world car trials are essential to investigate
the performance of Vehicle-to-Everything (V2X) networks. However, simulations
are imperfect models of the physical reality and can be trusted only when they
indicate agreement with the real-world. On the other hand, trials lack
reproducibility and are subject to uncertainties and errors. In this paper, we
will illustrate a case study where the interrelationship between trials,
simulation, and the reality-of-interest is presented. Results are then compared
in a holistic fashion. Our study will describe the procedure followed to
macroscopically calibrate a full-stack network simulator to conduct
high-fidelity full-stack computer simulations.Comment: To appear in IEEE VNC 2017, Torino, I
Massive MIMO Systems with Non-Ideal Hardware: Energy Efficiency, Estimation, and Capacity Limits
The use of large-scale antenna arrays can bring substantial improvements in
energy and/or spectral efficiency to wireless systems due to the greatly
improved spatial resolution and array gain. Recent works in the field of
massive multiple-input multiple-output (MIMO) show that the user channels
decorrelate when the number of antennas at the base stations (BSs) increases,
thus strong signal gains are achievable with little inter-user interference.
Since these results rely on asymptotics, it is important to investigate whether
the conventional system models are reasonable in this asymptotic regime. This
paper considers a new system model that incorporates general transceiver
hardware impairments at both the BSs (equipped with large antenna arrays) and
the single-antenna user equipments (UEs). As opposed to the conventional case
of ideal hardware, we show that hardware impairments create finite ceilings on
the channel estimation accuracy and on the downlink/uplink capacity of each UE.
Surprisingly, the capacity is mainly limited by the hardware at the UE, while
the impact of impairments in the large-scale arrays vanishes asymptotically and
inter-user interference (in particular, pilot contamination) becomes
negligible. Furthermore, we prove that the huge degrees of freedom offered by
massive MIMO can be used to reduce the transmit power and/or to tolerate larger
hardware impairments, which allows for the use of inexpensive and
energy-efficient antenna elements.Comment: To appear in IEEE Transactions on Information Theory, 28 pages, 15
figures. The results can be reproduced using the following Matlab code:
https://github.com/emilbjornson/massive-MIMO-hardware-impairment
EC-CENTRIC: An Energy- and Context-Centric Perspective on IoT Systems and Protocol Design
The radio transceiver of an IoT device is often where most of the energy is consumed. For this reason, most research so far has focused on low power circuit and energy efficient physical layer designs, with the goal of reducing the average energy per information bit required for communication. While these efforts are valuable per se, their actual effectiveness can be partially neutralized by ill-designed network, processing and resource management solutions, which can become a primary factor of performance degradation, in terms of throughput, responsiveness and energy efficiency. The objective of this paper is to describe an energy-centric and context-aware optimization framework that accounts for the energy impact of the fundamental functionalities of an IoT system and that proceeds along three main technical thrusts: 1) balancing signal-dependent processing techniques (compression and feature extraction) and communication tasks; 2) jointly designing channel access and routing protocols to maximize the network lifetime; 3) providing self-adaptability to different operating conditions through the adoption of suitable learning architectures and of flexible/reconfigurable algorithms and protocols. After discussing this framework, we present some preliminary results that validate the effectiveness of our proposed line of action, and show how the use of adaptive signal processing and channel access techniques allows an IoT network to dynamically tune lifetime for signal distortion, according to the requirements dictated by the application
Nuts and Bolts of a Realistic Stochastic Geometric Analysis of mmWave HetNets: Hardware Impairments and Channel Aging
© 2019 IEEE.Motivated by heterogeneous network (HetNet) design in improving coverage and by millimeter-wave (mmWave) transmission offering an abundance of extra spectrum, we present a general analytical framework shedding light on the downlink of realistic mmWave HetNets consisting of K tiers of randomly located base stations. Specifically, we model, by virtue of stochastic geometry tools, the multi-Tier multi-user (MU) multiple-input multiple-output (MIMO) mmWave network degraded by the inevitable residual additive transceiver hardware impairments (RATHIs) and channel aging. Given this setting, we derive the coverage probability and the area spectral efficiency (ASE), and we subsequently evaluate the impact of residual transceiver hardware impairments and channel aging on these metrics. Different path-loss laws for line-of-sight and non-line-of-sight are accounted for the analysis, which are among the distinguishing features of mmWave systems. Among the findings, we show that the RATHIs have a meaningful impact at the high-signal-To-noise-ratio regime, while the transmit additive distortion degrades further than the receive distortion the system performance. Moreover, serving fewer users proves to be preferable, and the more directive the mmWaves are, the higher the ASE becomes.Peer reviewedFinal Accepted Versio
Adaptive Nonlinear RF Cancellation for Improved Isolation in Simultaneous Transmit-Receive Systems
This paper proposes an active radio frequency (RF) cancellation solution to
suppress the transmitter (TX) passband leakage signal in radio transceivers
supporting simultaneous transmission and reception. The proposed technique is
based on creating an opposite-phase baseband equivalent replica of the TX
leakage signal in the transceiver digital front-end through adaptive nonlinear
filtering of the known transmit data, to facilitate highly accurate
cancellation under a nonlinear TX power amplifier (PA). The active RF
cancellation is then accomplished by employing an auxiliary transmitter chain,
to generate the actual RF cancellation signal, and combining it with the
received signal at the receiver (RX) low noise amplifier (LNA) input. A
closed-loop parameter learning approach, based on the decorrelation principle,
is also developed to efficiently estimate the coefficients of the nonlinear
cancellation filter in the presence of a nonlinear TX PA with memory, finite
passive isolation, and a nonlinear RX LNA. The performance of the proposed
cancellation technique is evaluated through comprehensive RF measurements
adopting commercial LTE-Advanced transceiver hardware components. The results
show that the proposed technique can provide an additional suppression of up to
54 dB for the TX passband leakage signal at the RX LNA input, even at
considerably high transmit power levels and with wide transmission bandwidths.
Such novel cancellation solution can therefore substantially improve the TX-RX
isolation, hence reducing the requirements on passive isolation and RF
component linearity, as well as increasing the efficiency and flexibility of
the RF spectrum use in the emerging 5G radio networks.Comment: accepted to IEE
- …