An Efficient Approach for Line-Following Automated Guided Vehicles Based on Fuzzy Inference Mechanism

Recently, there has been increasing attention paid to AGV (Automated Guided Vehicle) in factories and warehouses to enhance the level of automation. In order to improve productivity, it is necessary to increase the efficiency of the AGV, including working speed and accuracy. This study presents a fuzzy-PID controller for improving the efficiency of a line-following AGV. A line-following AGV suffers from tracking errors, especially on curved paths, which causes a delay in the lap time. The fuzzy-PID controller in this study mimics the principle of human vehicle control as the situation-aware speed adjustment on curved paths. Consequently, it is possible to reduce the tracking error of AGV and improve its speed. Experimental results show that the Fuzzy-PID controller outperforms the PID controller in both accuracy and speed, especially the lap time of a line-following AGV is enhanced up to 28.6% with the proposed fuzzy-PID controller compared to that with the PID controller only

Intelligent coordination steering control of automated guided vehicle

In this paper, based on the neural network, fuzzy control and bang-bang control, an intelligent coordination control strategy for automated guided vehicle (AGV) steering system is presented. The dynamic steering model of distance error and orientation angle error for AGV is expressed. With least square method of system identification, the model of AGV is identified. Because a toy type of AGV is employed, its structure is simple, but AGV model parameters are variable according to the operating conditions and environment. In order to improve the dynamic performances of AGV, the intelligent coordinated control strategy is used to design the AGV controller in the AGV steering control system. Simulation and experimental results show the effectiveness of the proposed control strategy. © 2011 IEEE

Levenberg-Marquardt optimised neural networks for trajectory tracking of autonomous ground vehicles

Trajectory tracking is an essential capability of robotics operation in industrial automation. In this article, an artificial neural controller is proposed to tackle trajectory-tracking problem of an autonomous ground vehicle (AGV). The controller is implemented based on fractional order proportional integral derivative (FOPID) control that was already designed in an earlier work. A non-holonomic model type of AGV is analysed and presented. The model includes the kinematic, dynamic characteristics and the actuation system of the VGA. The artificial neural controller consists of two artificial neural networks (ANNs) that are designed to control the inputs of the AGV. In order to train the two artificial neural networks, Levenberg-Marquardt (LM) algorithm was used to obtain the parameters of the ANNs. The validation of the proposed controller has been verified through a given reference trajectory. The obtained results show a considerable improvement in term of minimising trajectory tracking error over the FOPID controller

Non-linear Control of an Autonomous Ground Vehicle

In this paper, in order to select a speed controller for a specific non-linear autonomous ground vehicle, proportional-integral-derivative (PID), Fuzzy, and linear quadratic regulator (LQR) controllers were designed. Here, in order to carry out the tuning of the above controllers, a multicomputer genetic algorithm (MGA) was designed. Then, the results of the MGA were used to parameterize the PID, Fuzzy and LQR controllers and to test them under laboratory conditions. Finally, a comparative analysis of the performance of the three controllers was conducted

Combining reinforcement learning and conventional control to improve automatic guided vehicles tracking of complex trajectories

With the rapid growth of logistics transportation in the framework of Industry 4.0, automated guided vehicle (AGV) technologies have developed speedily. These systems present two coupled control problems: the control of the longitudinal velocity, essential to ensure the application requirements such as throughput and tag time, and the trajectory tracking control, necessary to ensure the proper accuracy in loading and unloading manoeuvres. When the paths are very short or have abrupt changes, the kinematic constraints play a restrictive role, and the tracking control becomes more challenging. In this case, advanced control strategies such as those based on intelligent techniques, including machine learning (ML) can be useful. Hence, in this work, we present an intelligent hybrid control scheme that combines reinforcement learning-based control (RLC) with conventional PI regulators to face both control problems simultaneously. On the one hand, PIs are used to control the speed of each wheel. On the other hand, the input reference of these regulators is calculated by the RLC in order to reduce the guiding error of the path tracking and to maintain the longitudinal speed. The latter is compared with a PID path following controller. The PID regulators have been tuned by genetic algorithms. The RLC allows the vehicle to learn how to improve the trajectory tracking in an adaptive way and thus, the AGV can face disturbances or unknown physical system parameters that may change due to friction and degradation of AGV mechanical components. Extensive simulation experiments of the proposed intelligent control strategy on a hybrid tricycle and differential AGV model, that considers the kinematics and the dynamics of the vehicle, prove the efficiency of the approach when following different demanding trajectories. The performance of the RL tracking controller in comparison with the optimized PID gives errors around 70% smaller, and the average maximum error is also 48% lower.Open access funding enabled and organized by Projekt DEAL

A survey on fractional order control techniques for unmanned aerial and ground vehicles

In recent years, numerous applications of science and engineering for modeling and control of unmanned aerial vehicles (UAVs) and unmanned ground vehicles (UGVs) systems based on fractional calculus have been realized. The extra fractional order derivative terms allow to optimizing the performance of the systems. The review presented in this paper focuses on the control problems of the UAVs and UGVs that have been addressed by the fractional order techniques over the last decade

Performance and Extreme Conditions Analysis Based on Iterative Modelling Algorithm for Multi-Trailer AGVs

Automatic guidance vehicles (AGV) are industrial vehicles that play an important role in the development of smart manufacturing systems and Industry 4.0. To provide these autonomous systems with the flexibility that is required today in these industrial workspaces, AGV computational models are necessary in order to analyze their performance and design efficient planning and control strategies. To address these issues, in this work, the mathematical model and the algorithm that implement a computational control-oriented simulation model of a hybrid tricycle-differential AGV with multi-trailers have been developed. Physical factors, such as wheel-ground interaction and the effect of vertical and lateral loads on its dynamics, have been incorporated into the model. The model has been tested in simulation with two different controllers and three trajectories: a circumference, a square, and an s-shaped curve. Furthermore, it has been used to analyze extreme situations of slipping and capsizing and the influence of the number of trailers on the tracking error and the control effort. This way, the minimum lateral friction coefficient to avoid slipping and the minimum ratio between the lateral and height displacement of the center of gravity to avoid capsizing have been obtained. In addition, the effect of a change in the friction coefficient has also been simulated

Automated steering design using Neural Network

If you don't move forward-you begin to move backward. Technological advancement today has brought us to a frontier where the human has become the basic constraint in our ascent towards safer and faster transportation. Human error is mostly responsible for many road traffic accidents which every year take the lives of lots of people and injure many more. Driving protection is thus a major concern leading to research in autonomous driving systems. Automatic motion planning and navigation is the primary task of an automated guided vehicle or mobile robots. All such navigation systems consist of a data collection system, a decision making system and a hardware control system. In this research our artificial intelligence system is based on neural network model for navigation of an AGV in unpredictable and imprecise environment. A five layered with gradient descent momentum back-propagation system which uses heading angle and obstacle distances as input. The networks are trained by real data obtained from vehicle tracking live test runs. Considering the high amount of risk of testing the vehicle in real space-time conditions, it would initially be tested in simulated environment with the use of MATLAB®. The hardware control for an AGV should be robust and precise. An Aerial and a Grounded prototype were developed to test our neural network model in real time situation

A Visual AGV-Urban Car using Fuzzy Control

The goal of the work described in this paper is to develop a visual line guided system for being used on-board an Autonomous Guided Vehicle (AGV) commercial car, controlling the steering and using just the visual information of a line painted below the car. In order to implement the control of the vehicle, a Fuzzy Logic controller has been implemented, that has to be robust against curvature changes and velocity changes. The only input information for the controller is the visual distance from the image center captured by a camera pointing downwards to the guiding line on the road, at a commercial frequency of 30Hz. The good performance of the controller has successfully been demonstrated in a real environment at urban velocities. The presented results demonstrate the capability of the Fuzzy controller to follow a circuit in urban environments without previous information about the path or any other information from additional sensor