A review of system integration and current integrity monitoring methods for positioning in intelligent transport systems

Applications of intelligent transportation systems are continuously increasing. Since positioning is a key component in these systems, it is essential to ensure its reliability and robustness, and monitor its integrity so that the required levels of positioning accuracy, integrity, continuity and availability can be maintained. In challenging environments, such as urban areas, a single navigation system is often difficult to fulfil the positioning requirements. Therefore, integrating different navigation sensors becomes intrinsic, which may include the global navigation satellite systems, the inertial navigation systems, the odometers and the light detection and ranging sensors. To bind the positioning errors within a pre-defined integrity risk, the integrity monitoring is an essential step in the positioning service, which needs to be fulfilled for integrated vehicular navigation systems used in intelligent transportation systems. Developing such innovative integrity monitoring techniques requires knowledge of many relevant aspects including the structure, positioning methodology and different errors affecting the positioning solution of the individual and integrated systems. Moreover, knowledge is needed for the current mitigation techniques of these errors, for possible fault detection and exclusion algorithms and for computation of protection levels. This paper provides an overview and discussion of these aspects with a focus on intelligent transportation systems

Plane Constraints Aided Multi-Vehicle Cooperative Positioning Using Factor Graph Optimization

The development of vehicle-to-vehicle (V2V) communication facil-itates the study of cooperative positioning (CP) techniques for vehicular applications. The CP methods can improve the posi-tioning availability and accuracy by inter-vehicle ranging and data exchange between vehicles. However, the inter-vehicle rang-ing can be easily interrupted due to many factors such as obsta-cles in-between two cars. Without inter-vehicle ranging, the other cooperative data such as vehicle positions will be wasted, leading to performance degradation of range-based CP methods. To fully utilize the cooperative data and mitigate the impact of inter-vehicle ranging loss, a novel cooperative positioning method aided by plane constraints is proposed in this paper. The positioning results received from cooperative vehicles are used to construct the road plane for each vehicle. The plane parameters are then introduced into CP scheme to impose constraints on positioning solutions. The state-of-art factor graph optimization (FGO) algo-rithm is employed to integrate the plane constraints with raw data of Global Navigation Satellite Systems (GNSS) as well as inter-vehicle ranging measurements. The proposed CP method has the ability to resist the interruptions of inter-vehicle ranging since the plane constraints are computed by just using position-related data. A vehicle can still benefit from the position data of cooperative vehicles even if the inter-vehicle ranging is unavaila-ble. The experimental results indicate the superiority of the pro-posed CP method in positioning performance over the existing methods, especially when the inter-ranging interruptions occur.Comment: 14 pages, 16 figures, IEEE trans on IT

UAV or Drones for Remote Sensing Applications in GPS/GNSS Enabled and GPS/GNSS Denied Environments

The design of novel UAV systems and the use of UAV platforms integrated with robotic sensing and imaging techniques, as well as the development of processing workflows and the capacity of ultra-high temporal and spatial resolution data, have enabled a rapid uptake of UAVs and drones across several industries and application domains.This book provides a forum for high-quality peer-reviewed papers that broaden awareness and understanding of single- and multiple-UAV developments for remote sensing applications, and associated developments in sensor technology, data processing and communications, and UAV system design and sensing capabilities in GPS-enabled and, more broadly, Global Navigation Satellite System (GNSS)-enabled and GPS/GNSS-denied environments.Contributions include:UAV-based photogrammetry, laser scanning, multispectral imaging, hyperspectral imaging, and thermal imaging;UAV sensor applications; spatial ecology; pest detection; reef; forestry; volcanology; precision agriculture wildlife species tracking; search and rescue; target tracking; atmosphere monitoring; chemical, biological, and natural disaster phenomena; fire prevention, flood prevention; volcanic monitoring; pollution monitoring; microclimates; and land use;Wildlife and target detection and recognition from UAV imagery using deep learning and machine learning techniques;UAV-based change detection

Design and validation of decision and control systems in automated driving

xxvi, 148 p.En la última década ha surgido una tendencia creciente hacia la automatización de los vehículos, generando un cambio significativo en la movilidad, que afectará profundamente el modo de vida de las personas, la logística de mercancías y otros sectores dependientes del transporte. En el desarrollo de la conducción automatizada en entornos estructurados, la seguridad y el confort, como parte de las nuevas funcionalidades de la conducción, aún no se describen de forma estandarizada. Dado que los métodos de prueba utilizan cada vez más las técnicas de simulación, los desarrollos existentes deben adaptarse a este proceso. Por ejemplo, dado que las tecnologías de seguimiento de trayectorias son habilitadores esenciales, se deben aplicar verificaciones exhaustivas en aplicaciones relacionadas como el control de movimiento del vehículo y la estimación de parámetros. Además, las tecnologías en el vehículo deben ser lo suficientemente robustas para cumplir con los requisitos de seguridad, mejorando la redundancia y respaldar una operación a prueba de fallos. Considerando las premisas mencionadas, esta Tesis Doctoral tiene como objetivo el diseño y la implementación de un marco para lograr Sistemas de Conducción Automatizados (ADS) considerando aspectos cruciales, como la ejecución en tiempo real, la robustez, el rango operativo y el ajuste sencillo de parámetros. Para desarrollar las aportaciones relacionadas con este trabajo, se lleva a cabo un estudio del estado del arte actual en tecnologías de alta automatización de conducción. Luego, se propone un método de dos pasos que aborda la validación de ambos modelos de vehículos de simulación y ADS. Se introducen nuevas formulaciones predictivas basadas en modelos para mejorar la seguridad y el confort en el proceso de seguimiento de trayectorias. Por último, se evalúan escenarios de mal funcionamiento para mejorar la seguridad en entornos urbanos, proponiendo una estrategia alternativa de estimación de posicionamiento para minimizar las condiciones de riesgo

Design and validation of decision and control systems in automated driving

xxvi, 148 p.En la última década ha surgido una tendencia creciente hacia la automatización de los vehículos, generando un cambio significativo en la movilidad, que afectará profundamente el modo de vida de las personas, la logística de mercancías y otros sectores dependientes del transporte. En el desarrollo de la conducción automatizada en entornos estructurados, la seguridad y el confort, como parte de las nuevas funcionalidades de la conducción, aún no se describen de forma estandarizada. Dado que los métodos de prueba utilizan cada vez más las técnicas de simulación, los desarrollos existentes deben adaptarse a este proceso. Por ejemplo, dado que las tecnologías de seguimiento de trayectorias son habilitadores esenciales, se deben aplicar verificaciones exhaustivas en aplicaciones relacionadas como el control de movimiento del vehículo y la estimación de parámetros. Además, las tecnologías en el vehículo deben ser lo suficientemente robustas para cumplir con los requisitos de seguridad, mejorando la redundancia y respaldar una operación a prueba de fallos. Considerando las premisas mencionadas, esta Tesis Doctoral tiene como objetivo el diseño y la implementación de un marco para lograr Sistemas de Conducción Automatizados (ADS) considerando aspectos cruciales, como la ejecución en tiempo real, la robustez, el rango operativo y el ajuste sencillo de parámetros. Para desarrollar las aportaciones relacionadas con este trabajo, se lleva a cabo un estudio del estado del arte actual en tecnologías de alta automatización de conducción. Luego, se propone un método de dos pasos que aborda la validación de ambos modelos de vehículos de simulación y ADS. Se introducen nuevas formulaciones predictivas basadas en modelos para mejorar la seguridad y el confort en el proceso de seguimiento de trayectorias. Por último, se evalúan escenarios de mal funcionamiento para mejorar la seguridad en entornos urbanos, proponiendo una estrategia alternativa de estimación de posicionamiento para minimizar las condiciones de riesgo

New Approach of Indoor and Outdoor Localization Systems

Accurate determination of the mobile position constitutes the basis of many new applications. This book provides a detailed account of wireless systems for positioning, signal processing, radio localization techniques (Time Difference Of Arrival), performances evaluation, and localization applications. The first section is dedicated to Satellite systems for positioning like GPS, GNSS. The second section addresses the localization applications using the wireless sensor networks. Some techniques are introduced for localization systems, especially for indoor positioning, such as Ultra Wide Band (UWB), WIFI. The last section is dedicated to Coupled GPS and other sensors. Some results of simulations, implementation and tests are given to help readers grasp the presented techniques. This is an ideal book for students, PhD students, academics and engineers in the field of Communication, localization & Signal Processing, especially in indoor and outdoor localization domains

Air Force Institute of Technology Research Report 2006

This report summarizes the research activities of the Air Force Institute of Technology’s Graduate School of Engineering and Management. It describes research interests and faculty expertise; lists student theses/dissertations; identifies research sponsors and contributions; and outlines the procedures for contacting the school. Included in the report are: faculty publications, conference presentations, consultations, and funded research projects. Research was conducted in the areas of Aeronautical and Astronautical Engineering, Electrical Engineering and Electro-Optics, Computer Engineering and Computer Science, Systems and Engineering Management, Operational Sciences, Mathematics, Statistics and Engineering Physics

Fail-Safe Vehicle Pose Estimation in Lane-Level Maps Using Pose Graph Optimization

Die hochgenaue Posenschätzung autonomer Fahrzeuge sowohl in HD-Karten als auch spurrelativ ist unerlässlich um eine sichere Fahrzeugführung zu gewährleisten. Für die Serienfertigung wird aus Kosten- und Platzgründen bewusst auf hochgenaue, teure Einzelsensorik verzichtet und stattdessen auf eine Vielzahl von Sensoren, die neben der Posenschätzung auch von anderen Modulen verwendet werden können, zurückgegriffen. Im Fokus dieser Arbeit steht die Unsicherheitsschätzung, Bewertung und Fusion dieser Sensordaten. Die Optimierung von Posengraphen zur Fusion von Sensordaten zeichnet sich, im Gegensatz zu klassischen Filterverfahren, wie Kalman oder Partikelfilter, durch seine Robustheit gegenüber Fehlmessungen und der Flexibilität in der Modellierung aus. Die Optimierung eines Posengraphen wurde erstmalig auf mobilen Roboterplattformen zur Lösung sogenannter SLAM-Probleme angewendet. Diese Verfahren wurden immer weiter entwickelt und im speziellen auch zur rein kamerabasierten Lokalisierung autonomer Fahrzeuge in 3D-Punktwolken erfolgreich emonstriert. Für die Entwicklung und Freigabe sicherheitsrelevanter Systeme nach ISO 26262 wird neben der Genauigkeit jedoch auch eine Aussage über die Qualität und Ausfallsicherheit dieser Systeme gefordert. Diese Arbeit befasst sich, neben der Schätzung der karten- und spurrelativen Pose, auch mit der Schätzung der Posenunsicherheit und der Integrität der Sensordaten zueinander. Auf Grundlage dieser Arbeit wird eine Abschätzung der Ausfallsicherheit des Lokalisierungsmoduls ermöglicht. Motiviert durch das Projekt Ko-HAF werden zur Lokalisierung in HD-Karten lediglich Spurmarkierungen verwendet. Die speichereffiziente Darstellung dieser Karten ermöglicht eine hochfrequente Aktualisierung der Karteninhalte durch eine Fahrzeugflotte. Der vorgestellte Ansatz wurde prototypisch auf einem Opel Insignia umgesetzt. Der Testträger wurde um eine Front- und Heckkamera sowie einen GNSS-Empfänger erweitert. Zunächst werden die Schätzung der karten-und spurrelativen Fahrzeugpose, der GNSS-Signalauswertung sowie der Bewegungsschätzung des Fahrzeugs vorgestellt. Durch einen Vergleich der Schätzungen zueinander werden die Unsicherheiten der einzelnen Module berechnet. Das Lokalisierungsproblem wird dann durch einen Optimierer gelöst. Mithilfe der berechneten Unsicherheiten wird in einem nachgelagerten Schritt eine Bewertung der einzelnen Module durchgeführt. Zur Bewertung des Ansatzes wurden sowohl hochdynamische Manöver auf einer Teststrecke als auch Fahrten auf öffentlichen Autobahnen ausgewertet

Trajectory determination and analysis in sports by satellite and inertial navigation

This research presents methods for performance analysis in sports through the integration of Global Positioning System (GPS) measurements with Inertial Navigation System (INS). The described approach focuses on strapdown inertial navigation using Micro-Electro-Mechanical System (MEMS) Inertial Measurement Units (IMU). A simple inertial error model is proposed and its relevance is proven by comparison to reference data. The concept is then extended to a setup employing several MEMS-IMUs in parallel. The performance of the system is validated with experiments in skiing and motorcycling. The position accuracy achieved with the integrated system varies from decimeter level with dual-frequency differential GPS (DGPS) to 0.7 m for low-cost, single-frequency DGPS. Unlike the position, the velocity accuracy (0.2 m/s) and orientation accuracy (1 – 2 deg) are almost insensitive to the choice of the receiver hardware. The orientation performance, however, is improved by 30 – 50% when integrating four MEMS-IMUs in skew-redundant configuration. Later part of this research introduces a methodology for trajectory comparison. It is shown that trajectories based on dual-frequency GPS positions can be directly modeled and compared using cubic spline smoothing, while those derived from single-frequency DGPS require additional filtering and matching

Actuators for Intelligent Electric Vehicles

This book details the advanced actuators for IEVs and the control algorithm design. In the actuator design, the configuration four-wheel independent drive/steering electric vehicles is reviewed. An in-wheel two-speed AMT with selectable one-way clutch is designed for IEV. Considering uncertainties, the optimization design for the planetary gear train of IEV is conducted. An electric power steering system is designed for IEV. In addition, advanced control algorithms are proposed in favour of active safety improvement. A supervision mechanism is applied to the segment drift control of autonomous driving. Double super-resolution network is used to design the intelligent driving algorithm. Torque distribution control technology and four-wheel steering technology are utilized for path tracking and adaptive cruise control. To advance the control accuracy, advanced estimation algorithms are studied in this book. The tyre-road peak friction coefficient under full slip rate range is identified based on the normalized tyre model. The pressure of the electro-hydraulic brake system is estimated based on signal fusion. Besides, a multi-semantic driver behaviour recognition model of autonomous vehicles is designed using confidence fusion mechanism. Moreover, a mono-vision based lateral localization system of low-cost autonomous vehicles is proposed with deep learning curb detection. To sum up, the discussed advanced actuators, control and estimation algorithms are beneficial to the active safety improvement of IEVs