On-board processing architectures for satellite B-ISDN services

Onboard baseband processing architectures for future satellite broadband integrated services digital networks (B-ISDN's) are addressed. To assess the feasibility of implementing satellite B-ISDN services, critical design issues, such as B-ISDN traffic characteristics, transmission link design, and a trade-off between onboard circuit and fast packet switching, are analyzed. Examples of the two types of switching mechanisms and potential onboard network control functions are presented. A sample network architecture is also included to illustrate a potential onboard processing system

Worst-case end-to-end delays evaluation for SpaceWire networks

SpaceWire is a standard for on-board satellite networks chosen by the ESA as the basis for multiplexing payload and control traffic on future data-handling architectures. However, network designers need tools to ensure that the network is able to deliver critical messages on time. Current research fails to address this needs for SpaceWire networks. On one hand, many papers only seek to determine probabilistic results for end-to-end delays on Wormhole networks like SpaceWire. This does not provide sufficient guarantee for critical traffic. On the other hand, a few papers give methods to determine maximum latencies on wormhole networks that, unlike SpaceWire, have dedicated real-time mechanisms built-in. Thus, in this paper, we propose an appropriate method to compute an upper-bound on the worst-case end-to-end delay of a packet in a SpaceWire network

Applications of satellite technology to broadband ISDN networks

Two satellite architectures for delivering broadband integrated services digital network (B-ISDN) service are evaluated. The first is assumed integral to an existing terrestrial network, and provides complementary services such as interconnects to remote nodes as well as high-rate multicast and broadcast service. The interconnects are at a 155 Mbs rate and are shown as being met with a nonregenerative multibeam satellite having 10-1.5 degree spots. The second satellite architecture focuses on providing private B-ISDN networks as well as acting as a gateway to the public network. This is conceived as being provided by a regenerative multibeam satellite with on-board ATM (asynchronous transfer mode) processing payload. With up to 800 Mbs offered, higher satellite EIRP is required. This is accomplished with 12-0.4 degree hopping beams, covering a total of 110 dwell positions. It is estimated the space segment capital cost for architecture one would be about $190M whereas the second architecture would be about$250M. The net user cost is given for a variety of scenarios, but the cost for 155 Mbs services is shown to be about $15-22/minute for 25 percent system utilization

Satellites and the BISDN: An overview of NASA R/D

NASA is currently the only U.S. government agency developing advanced technology on behalf of the commercial communications satellite industry. The Agency's commercial communications program includes several activities which are either directly or indirectly related to the potential use of satellites within a broadband integrated services digital network (BISDN). Lewis Research Center's Space Electronics Division is actively pursuing a number of thrusts aimed at the integration of satellites into the BISDN through the development of high-risk and proof-of-concept technology

Link failure testing project on a satellite SDN network using Bidirectional Forwarding Detection

This project focuses on implementing a variable grid topology network for simulating an inter-satellite links connection to evaluate link failure detection times in a satellite SoftwareDefined Networking (SDN) using the Bidirectional Forwarding Detection (BFD) protocol (RFC 5880). Today, there is significant growth and deployment of LEO satellite networks, and SDN technology is being successfully used in these LEO satellite constellation networks due to the flexibility that this technology offers in the face of dynamic variation in topology network, limited bandwidth and traffic variations. An important point for the correct operation of these networks is the reliability and stability of the links that interconnect the satellites of the constellation, since this constellation is in permanent motion, orbiting the earth. The work developed in this project is directly related to this topic and the BFD detection protocol has been used to determine the connectivity failures of the test network links. The BFD is a protocol which provides fast forwarding path failure detection times and it is independent from physical media, routing protocols and data protocols. The BFD protocol works in the forwarding plane and is well suited for use with SDN switches. The testbed has been built using the "ContainerNet" Python API to implement the network topology and link interconnection of each satellite node. The satellite switching service is implemented in a docker instance, using OpenVirtualSwitch (OVS) as the internal packet switch of each node. OpenVirtualSwitch is an SDN-compliant programmable switching network device that has support for the BFD protocol. A transmission scenario is built on this switching network. This scenario includes two nodes that work as communication endpoints. The nodes have been configured so that between the endpoints there are two separate alternative paths. In addition to the datapath configuration, the BFD protocol has been configured to monitor the status of each link. A software developed running in all intermediate nodes are able to notify a link failure upstream of the datapath until the end nodes. An then end nodes can switch to another path. The final results must determine which are the BFD parameters to achieve a compromise between the BFD packet signaling period and the bandwidth used to keep the VoIP communication parameters within the acceptable limits in the event of a link failure with a route update

Future benefits and applications of intelligent on-board processing to VSAT services

The trends and roles of VSAT services in the year 2010 time frame are examined based on an overall network and service model for that period. An estimate of the VSAT traffic is then made and the service and general network requirements are identified. In order to accommodate these traffic needs, four satellite VSAT architectures based on the use of fixed or scanning multibeam antennas in conjunction with IF switching or onboard regeneration and baseband processing are suggested. The performance of each of these architectures is assessed and the key enabling technologies are identified

On-board congestion control for satellite packet switching networks

It is desirable to incorporate packet switching capability on-board for future communication satellites. Because of the statistical nature of packet communication, incoming traffic fluctuates and may cause congestion. Thus, it is necessary to incorporate a congestion control mechanism as part of the on-board processing to smooth and regulate the bursty traffic. Although there are extensive studies on congestion control for both baseband and broadband terrestrial networks, these schemes are not feasible for space based switching networks because of the unique characteristics of satellite link. Here, we propose a new congestion control method for on-board satellite packet switching. This scheme takes into consideration the long propagation delay in satellite link and takes advantage of the the satellite's broadcasting capability. It divides the control between the ground terminals and satellite, but distributes the primary responsibility to ground terminals and only requires minimal hardware resource on-board satellite