2,478 research outputs found
Dynamics of the Orthoglide parallel robot
Recursive matrix relations for kinematics and dynamics of the Orthoglide
parallel robot having three concurrent prismatic actuators are established in
this paper. These are arranged according to the Cartesian coordinate system
with fixed orientation, which means that the actuating directions are normal to
each other. Three identical legs connecting to the moving platform are located
on three planes being perpendicular to each other too. Knowing the position and
the translation motion of the platform, we develop the inverse kinematics
problem and determine the position, velocity and acceleration of each element
of the robot. Further, the principle of virtual work is used in the inverse
dynamic problem. Some matrix equations offer iterative expressions and graphs
for the input forces and the powers of the three actuators
Development of kinematic equations and determination of workspace of a 6 DOF end-effector with closed-kinematic chain mechanism
This report presents results from the research grant entitled Active Control of Robot Manipulators, funded by the Goddard Space Flight Center, under Grant NAG5-780, for the period July 1, 1988 to January 1, 1989. An analysis is presented of a 6 degree-of-freedom robot end-effector built to study telerobotic assembly of NASA hardware in space. Since the end-effector is required to perform high precision motion in a limited workspace, closed-kinematic mechanisms are chosen for its design. A closed-form solution is obtained for the inverse kinematic problem and an iterative procedure employing Newton-Raphson method is proposed to solve the forward kinematic problem. A study of the end-effector workspace results in a general procedure for the workspace determination based on link constraints. Computer simulation results are presented
Computational neural learning formalisms for manipulator inverse kinematics
An efficient, adaptive neural learning paradigm for addressing the inverse kinematics of redundant manipulators is presented. The proposed methodology exploits the infinite local stability of terminal attractors - a new class of mathematical constructs which provide unique information processing capabilities to artificial neural systems. For robotic applications, synaptic elements of such networks can rapidly acquire the kinematic invariances embedded within the presented samples. Subsequently, joint-space configurations, required to follow arbitrary end-effector trajectories, can readily be computed. In a significant departure from prior neuromorphic learning algorithms, this methodology provides mechanisms for incorporating an in-training skew to handle kinematics and environmental constraints
Stiffness Analysis Of Multi-Chain Parallel Robotic Systems
The paper presents a new stiffness modelling method for multi-chain parallel
robotic manipulators with flexible links and compliant actuating joints. In
contrast to other works, the method involves a FEA-based link stiffness
evaluation and employs a new solution strategy of the kinetostatic equations,
which allows computing the stiffness matrix for singular postures and to take
into account influence of the external forces. The advantages of the developed
technique are confirmed by application examples, which deal with stiffness
analysis of a parallel manipulator of the Orthoglide famil
Lightweight design and encoderless control of a miniature direct drive linear delta robot
This paper presents the design, integration and experimental validation of a miniature light-weight delta robot targeted to be used for a variety of applications including the pick-place operations, high speed precise positioning and haptic implementations. The improvements brought by the new design contain; the use of a novel light-weight joint type replacing the conventional and heavy bearing structures and realization of encoderless position measurement algorithm based on hall effect sensor outputs of direct drive linear motors. The description of mechanical, electrical and software based improvements are followed by the derivation of a sliding mode controller to handle tracking of planar closed curves represented by elliptic fourier descriptors (EFDs). The new robot is tested in experiments and the validity of the improvements are verified for practical implementation
Parallel Manipulators
In recent years, parallel kinematics mechanisms have attracted a lot of attention from the academic and industrial communities due to potential applications not only as robot manipulators but also as machine tools. Generally, the criteria used to compare the performance of traditional serial robots and parallel robots are the workspace, the ratio between the payload and the robot mass, accuracy, and dynamic behaviour. In addition to the reduced coupling effect between joints, parallel robots bring the benefits of much higher payload-robot mass ratios, superior accuracy and greater stiffness; qualities which lead to better dynamic performance. The main drawback with parallel robots is the relatively small workspace. A great deal of research on parallel robots has been carried out worldwide, and a large number of parallel mechanism systems have been built for various applications, such as remote handling, machine tools, medical robots, simulators, micro-robots, and humanoid robots. This book opens a window to exceptional research and development work on parallel mechanisms contributed by authors from around the world. Through this window the reader can get a good view of current parallel robot research and applications
Analysis and experimental evaluation of a Stewart platform-based force/torque sensor
The kinematic analysis and experimentation of a force/torque sensor whose design is based on the mechanism of the Stewart Platform are discussed. Besides being used for measurement of forces/torques, the sensor also serves as a compliant platform which provides passive compliance during a robotic assembly task. It consists of two platforms, the upper compliant platform (UCP) and the lower compliant platform (LCP), coupled together through six spring-loaded pistons whose length variations are measured by six linear voltage differential transformers (LVDT) mounted along the pistons. Solutions to the forward and inverse kinematics of the force sensor are derived. Based on the known spring constant and the piston length changes, forces/torques applied to the LCP gripper are computed using vector algebra. Results of experiments conducted to evaluate the sensing capability of the force sensor are reported and discussed
A review of parallel processing approaches to robot kinematics and Jacobian
Due to continuously increasing demands in the area of advanced robot
control, it became necessary to speed up the computation. One way to
reduce the computation time is to distribute the computation onto
several processing units. In this survey we present different approaches
to parallel computation of robot kinematics and Jacobian. Thereby, we
discuss both the forward and the reverse problem. We introduce a
classification scheme and classify the references by this scheme
- …