EOS: A project to investigate the design and construction of real-time distributed embedded operating systems

The EOS project is investigating the design and construction of a family of real-time distributed embedded operating systems for reliable, distributed aerospace applications. Using the real-time programming techniques developed in co-operation with NASA in earlier research, the project staff is building a kernel for a multiple processor networked system. The first six months of the grant included a study of scheduling in an object-oriented system, the design philosophy of the kernel, and the architectural overview of the operating system. In this report, the operating system and kernel concepts are described. An environment for the experiments has been built and several of the key concepts of the system have been prototyped. The kernel and operating system is intended to support future experimental studies in multiprocessing, load-balancing, routing, software fault-tolerance, distributed data base design, and real-time processing

The communication processor of TUMULT-64

Tumult (Twente University MULTi-processor system) is a modular extendible multi-processor system designed and implemented at the Twente University of Technology in co-operation with Oce Nederland B.V. and the Dr. Neher Laboratories (Dutch PTT). Characteristics of the hardware are: MIMD type, distributed memory, message passing, high performance, real-time and fault tolerant. A distributed real-time operating system has been realized, consisting of a multi-tasking kernel per node, inter process communication via typed messages and a distributed file system. In this paper first a brief description of the system is given, after that the architecture of the communication processor will be discussed. Reduction of the communication overhead due to message passing will be emphasized.\ud \u

Hard Real-Time Networking on Firewire

This paper investigates the possibility of using standard, low-cost, widely used FireWire as a new generation fieldbus medium for real-time distributed control applications. A real-time software subsystem, RT-FireWire was designed that can, in combination with Linux-based real-time operating system, provide hard real-time communication over FireWire. In addition, a high-level module that can emulate Ethernet over RT-FireWire was implemented. This additional module enables existing IP-based real-time communication frameworks to work on top of FireWire. The real-time behavior of RT-FireWire was demonstrated with a simple control setup. Furthermore, an outlook of the future development on RT-FireWire is given

The Aerospace Energy Systems Laboratory: A BITBUS networking application

The NASA Ames-Dryden Flight Research Facility developed a computerized aircraft battery servicing facility called the Aerospace Energy Systems Laboratory (AESL). This system employs distributed processing with communications provided by a 2.4-megabit BITBUS local area network. Customized handlers provide real time status, remote command, and file transfer protocols between a central system running the iRMX-II operating system and ten slave stations running the iRMX-I operating system. The hardware configuration and software components required to implement this BITBUS application are required

Implementation of a distributed control system using real-time operating system

In a typical distributed control system, computer nodes communicate through a common communication channel that introduces data loss and random delays. Supplying a generic solution to these constraints is hard due to the complexity and large variety of possibilities that may affect these constraints in real life applications. In a modern communication network, if data is corrupted during transmission, it can be resent. However, it is not feasible to retransmit in control applications; if the packet contents correspond to measured plant outputs, then the most recent data should be measured and sent instead, or if the packet contents correspond to a control signal and the retransmission would cause the control signal to be applied late to the plant, it would be better to recalculate the signal and send it again. This thesis is an attempt to implement a distributed control system design method, Model Based Predictive Networked Control System (MBPNCS), which accepts the fact that arbitrary delay and data loss may happen. The MBPNCS method approaches the problem by using a plant model to predict a predefined number of future states of the plant and respective control signal for each, to compensate for the possible delay and data loss that can take place during the communication between nodes. In this work, after previous works have been examined, predictive control method that is used in the implementation is introduced. Design and implementation of the methodology is explained in detail and results of the tests are presented

Motivating Time as a First Class Entity

In hard real-time applications, programs must not only be functionally correct but must also meet timing constraints. Unfortunately, little work has been done to allow a high-level incorporation of timing constraints into distributed real-time programs. Instead the programmer is required to ensure system timing through a complicated synchronization process or through low-level programming, making it difficult to create and modify programs. In this report, we describe six features that must be integrated into a high level language and underlying support system in order to promote time to a first class position in distributed real-time programming systems: expressibility of time, real-time communication, enforcement of timing constraints, fault tolerance to violations of constraints, ensuring distributed system state consistency in the time domain, and static timing verification. For each feature we describe what is required, what related work had been performed, and why this work does not adequately provide sufficient capabilities for distributed real-time programming. We then briefly outline an integrated approach to provide these six features using a high-level distributed programming language and system tools such as compilers, operating systems, and timing analyzers to enforce and verify timing constraints

Effective interprocess communication (IPC) in a real-time transputer network

The thesis describes the design and implementation of an interprocess communication (IPC) mechanism within a real-time distributed operating system kernel (RT-DOS) which is designed for a transputer-based network. The requirements of real-time operating systems are examined and existing design and implementation strategies are described. Particular attention is paid to one of the object-oriented techniques although it is concluded that these techniques are not feasible for the chosen implementation platform. Studies of a number of existing operating systems are reported. The choices for various aspects of operating system design and their influence on the IPC mechanism to be used are elucidated. The actual design choices are related to the real-time requirements and the implementation that has been adopted is described. [Continues.