Predictive input delay compensation for motion control systems

This paper presents an analytical approach for the prediction of future motion to be used in input delay compensation of time-delayed motion control systems. The method makes use of the current and previous input values given to a nominally behaving system in order to realize the prediction of the future motion of that system. The generation of the future input is made through an integration which is realized in discrete time setting. Once the future input signal is created, it is used as the reference input of the remote system to enforce an input time delayed system, conduct a delay-free motion. Following the theoretical formulation, the proposed method is tested in experiments and the validity of the approach is verified

Delay compensation for nonlinear teleoperators using predictor observers

This paper presents a delay compensation technique for nonlinear teleoperators by developing a predictor type sliding mode observer (SMO) that estimates future states of the slave operator. Predicted states are then used in control formulation. In the proposed scheme, disturbance observers (DOB) are also utilized to linearize nonlinear dynamics of the master and slave operators. It is shown that utilization of disturbance observers and predictor observer allow simple PD controllers to be used to provide stable position tracking for bilateral teleoperation. Proposed approach is verified with simulations where it is compared with two state-of-the-art methods. Successful experimental results with a bilateral teleoperation system consisting of a pair of pantograph robots also validates the proposed method

Control and measurement delay compensation in bilateral position control

The main aim of this study is the improvement of the previously presented disturbance observer based bilateral control approaches of the authors with a delay regulator and a model tracking control (MTC) that runs on the slave side. These improvements eliminate the problems related to variable time delay inherent to such systems and model mismatch, respectively, and, hence, addressing the control and measurement delay problems in bilateral control applications. The performance is evaluated experimentally on a single-link arm controlled over the internet. The results demonstrate a significant improvement over the previously presented results obtained under load uncertainties and randomly varying network delays both in the control and feedback loop

Wave Prediction and Delay Modeling for Teleoperation via Internet

This paper propose a novel approach for modeling the end-to-end time delay dynamics of the internet using system identification, and use it for controlling real-time internet-based telerobotic operations. When a single model is used, it needs to adapt to the operating conditions before an appropriate control mechanism can be applied. Slow adaptation may result in large transient errors. As an alternative, we propose to use an adaptive multiple model framework, and determine the best model for the current operating conditions to activate the corresponding controller. We employ multivariable wave prediction method to achieve this objective

Teleoperation of passivity-based model reference robust control over the internet

This dissertation offers a survey of a known theoretical approach and novel experimental results in establishing a live communication medium through the internet to host a virtual communication environment for use in Passivity-Based Model Reference Robust Control systems with delays. The controller which is used as a carrier to support a robust communication between input-to-state stability is designed as a control strategy that passively compensates for position errors that arise during contact tasks and strives to achieve delay-independent stability for controlling of aircrafts or other mobile objects. Furthermore the controller is used for nonlinear systems, coordination of multiple agents, bilateral teleoperation, and collision avoidance thus maintaining a communication link with an upper bound of constant delay is crucial for robustness and stability of the overall system. For utilizing such framework an elucidation can be formulated by preparing site survey for analyzing not only the geographical distances separating the nodes in which the teleoperation will occur but also the communication parameters that define the virtual topography that the data will travel through. This survey will first define the feasibility of the overall operation since the teleoperation will be used to sustain a delay based controller over the internet thus obtaining a hypothetical upper bound for the delay via site survey is crucial not only for the communication system but also the delay is required for the design of the passivity-based model reference robust control. Following delay calculation and measurement via site survey, bandwidth tests for unidirectional and bidirectional communication is inspected to ensure that the speed is viable to maintain a real-time connection. Furthermore from obtaining the results it becomes crucial to measure the consistency of the delay throughout a sampled period to guarantee that the upper bound is not breached at any point within the communication to jeopardize the robustness of the controller. Following delay analysis a geographical and topological overview of the communication is also briefly examined via a trace-route to understand the underlying nodes and their contribution to the delay and round-trip consistency. To accommodate the communication channel for the controller the input and output data from both nodes need to be encapsulated within a transmission control protocol via a multithreaded design of a robust program within the C language. The program will construct a multithreaded client-server relationship in which the control data is transmitted. For added stability and higher level of security the channel is then encapsulated via an internet protocol security by utilizing a protocol suite for protecting the communication by authentication and encrypting each packet of the session using negotiation of cryptographic keys during each session

Network Latency in Teleoperation of Connected and Autonomous Vehicles:A Review of Trends, Challenges, and Mitigation Strategies

With remarkable advancements in the development of connected and autonomous vehicles (CAVs), the integration of teleoperation has become crucial for improving safety and operational efficiency. However, teleoperation faces substantial challenges, with network latency being a critical factor influencing its performance. This survey paper explores the impact of network latency along with state-of-the-art mitigation/compensation approaches. It examines cascading effects on teleoperation communication links (i.e., uplink and downlink) and how delays in data transmission affect the real-time perception and decision-making of operators. By elucidating the challenges and available mitigation strategies, the paper offers valuable insights for researchers, engineers, and practitioners working towards the seamless integration of teleoperation in the evolving landscape of CAVs

A Comprehensive Survey of the Tactile Internet: State of the art and Research Directions

The Internet has made several giant leaps over the years, from a fixed to a mobile Internet, then to the Internet of Things, and now to a Tactile Internet. The Tactile Internet goes far beyond data, audio and video delivery over fixed and mobile networks, and even beyond allowing communication and collaboration among things. It is expected to enable haptic communication and allow skill set delivery over networks. Some examples of potential applications are tele-surgery, vehicle fleets, augmented reality and industrial process automation. Several papers already cover many of the Tactile Internet-related concepts and technologies, such as haptic codecs, applications, and supporting technologies. However, none of them offers a comprehensive survey of the Tactile Internet, including its architectures and algorithms. Furthermore, none of them provides a systematic and critical review of the existing solutions. To address these lacunae, we provide a comprehensive survey of the architectures and algorithms proposed to date for the Tactile Internet. In addition, we critically review them using a well-defined set of requirements and discuss some of the lessons learned as well as the most promising research directions

A Novel Predictor Based Framework to Improve Mobility of High Speed Teleoperated Unmanned Ground Vehicles

Teleoperated Unmanned Ground Vehicles (UGVs) have been widely used in applications when driver safety, mission eciency or mission cost is a major concern. One major challenge with teleoperating a UGV is that communication delays can significantly affect the mobility performance of the vehicle and make teleoperated driving tasks very challenging especially at high speeds. In this dissertation, a predictor based framework with predictors in a new form and a blended architecture are developed to compensate effects of delays through signal prediction, thereby improving vehicle mobility performance. The novelty of the framework is that minimal information about the governing equations of the system is required to compensate delays and, thus, the prediction is robust to modeling errors. This dissertation first investigates a model-free solution and develops a predictor that does not require information about the vehicle dynamics or human operators' motion for prediction. Compared to the existing model-free methods, neither assumptions about the particular way the vehicle moves, nor knowledge about the noise characteristics that drive the existing predictive filters are needed. Its stability and performance are studied and a predictor design procedure is presented. Secondly, a blended architecture is developed to blend the outputs of the model-free predictor with those of a steering feedforward loop that relies on minimal information about vehicle lateral response. Better prediction accuracy is observed based on open-loop virtual testing with the blended architecture compared to using either the model-free predictors or the model-based feedforward loop alone. The mobility performance of teleoperated vehicles with delays and the predictor based framework are evaluated in this dissertation with human-in-the-loop experiments using both simulated and physical vehicles in teleoperation mode. Predictor based framework is shown to provide a statistically significant improvement in vehicle mobility and drivability in the experiments performed.PHDMechanical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttps://deepblue.lib.umich.edu/bitstream/2027.42/146026/1/zhengys_1.pd