1,805 research outputs found
Symbol-Level Selective Full-Duplex Relaying with Power and Location Optimization
In this paper, a symbol-level selective transmission for full-duplex (FD)
relaying networks is proposed to mitigate error propagation effects and improve
system spectral efficiency. The idea is to allow the FD relay node to predict
the correctly decoded symbols of each frame, based on the generalized square
deviation method, and discard the erroneously decoded symbols, resulting in
fewer errors being forwarded to the destination node. Using the capability for
simultaneous transmission and reception at the FD relay node, our proposed
strategy can improve the transmission efficiency without extra cost of
signalling overhead. In addition, targeting on the derived expression for
outage probability, we compare it with half-duplex (HD) relaying case, and
provide the transmission power and relay location optimization strategy to
further enhance system performance. The results show that our proposed scheme
outperforms the classic relaying protocols, such as cyclic redundancy check
based selective decode-and-forward (S-DF) relaying and threshold based S-DF
relaying in terms of outage probability and bit-error-rate. Moreover, the
performances with optimal power allocation is better than that with equal power
allocation, especially when the FD relay node encounters strong
self-interference and/or it is close to the destination node.Comment: 34 pages (single-column), 14 figures, 2 tables, accepted pape
Green Cellular Networks: A Survey, Some Research Issues and Challenges
Energy efficiency in cellular networks is a growing concern for cellular
operators to not only maintain profitability, but also to reduce the overall
environment effects. This emerging trend of achieving energy efficiency in
cellular networks is motivating the standardization authorities and network
operators to continuously explore future technologies in order to bring
improvements in the entire network infrastructure. In this article, we present
a brief survey of methods to improve the power efficiency of cellular networks,
explore some research issues and challenges and suggest some techniques to
enable an energy efficient or "green" cellular network. Since base stations
consume a maximum portion of the total energy used in a cellular system, we
will first provide a comprehensive survey on techniques to obtain energy
savings in base stations. Next, we discuss how heterogeneous network deployment
based on micro, pico and femto-cells can be used to achieve this goal. Since
cognitive radio and cooperative relaying are undisputed future technologies in
this regard, we propose a research vision to make these technologies more
energy efficient. Lastly, we explore some broader perspectives in realizing a
"green" cellular network technologyComment: 16 pages, 5 figures, 2 table
Improving Bandwidth Efficiency in E-band Communication Systems
The allocation of a large amount of bandwidth by regulating bodies in the
70/80 GHz band, i.e., the E-band, has opened up new potentials and challenges
for providing affordable and reliable Gigabit per second wireless
point-to-point links. This article first reviews the available bandwidth and
licensing regulations in the E-band. Subsequently, different propagation
models, e.g., the ITU-R and Cane models, are compared against measurement
results and it is concluded that to meet specific availability requirements,
E-band wireless systems may need to be designed with larger fade margins
compared to microwave systems. A similar comparison is carried out between
measurements and models for oscillator phase noise. It is confirmed that phase
noise characteristics, that are neglected by the models used for narrowband
systems, need to be taken into account for the wideband systems deployed in the
E-band. Next, a new multi-input multi-output (MIMO) transceiver design, termed
continuous aperture phased (CAP)-MIMO, is presented. Simulations show that
CAP-MIMO enables E-band systems to achieve fiber-optic like throughputs.
Finally, it is argued that full-duplex relaying can be used to greatly enhance
the coverage of E-band systems without sacrificing throughput, thus,
facilitating their application in establishing the backhaul of heterogeneous
networks.Comment: 16 pages, 6 Figures, Journal paper. IEEE Communication Magazine 201
A virtual MIMO dual-hop architecture based on hybrid spatial modulation
International audienceIn this paper, we propose a novel Virtual Multiple-Input-Multiple-Output (VMIMO) architecture based on the concept of Spatial Modulation (SM). Using a dual-hop and Decode-and-Forward protocol, we form a distributed system, called Dual-Hop Hybrid SM (DH-HSM). DH-HSM conveys information from a Source Node (SN) to a Destination Node (DN) via multiple Relay Nodes (RNs). The spatial position of the RNs is exploited for transferring information in addition to, or even without, a conventional symbol. In order to increase the performance of our architecture, while keeping the complexity of the RNs and DN low, we employ linear precoding using Channel State Information (CSI) at the SN. In this way, we form a Receive-Spatial Modulation (R-SM) pattern from the SN to the RNs, which is able to employ a centralized coordinated or a distributed uncoordinated detection algorithm at the RNs. In addition, we focus on the SN and propose two regularized linear precoding methods that employ realistic Imperfect Channel State Information at the Transmitter. The power of each precoder is analyzed theoretically. Using the Bit Error Rate (BER) metric, we evaluate our architecture against the following benchmark systems: 1) single relay; 2) best relay selection; 3) distributed Space Time Block Coding (STBC) VMIMO scheme; and 4) the direct communication link. We show that DH-HSM is able to achieve significant Signal-to-Noise Ratio (SNR) gains, which can be as high as 10.5 dB for a very large scale system setup. In order to verify our simulation results, we provide an analytical framework for the evaluation of the Average Bit Error Probability (ABEP)
Joint Relay Selection and Power Allocation in Large-Scale MIMO Systems with Untrusted Relays and Passive Eavesdroppers
In this paper, a joint relay selection and power allocation (JRP) scheme is
proposed to enhance the physical layer security of a cooperative network, where
a multiple antennas source communicates with a single-antenna destination in
presence of untrusted relays and passive eavesdroppers (Eves). The objective is
to protect the data confidentially while concurrently relying on the untrusted
relays as potential Eves to improve both the security and reliability of the
network. To realize this objective, we consider cooperative jamming performed
by the destination while JRP scheme is implemented. With the aim of maximizing
the instantaneous secrecy rate, we derive a new closed-form solution for the
optimal power allocation and propose a simple relay selection criterion under
two scenarios of non-colluding Eves (NCE) and colluding Eves (CE). For the
proposed scheme, a new closed-form expression is derived for the ergodic
secrecy rate (ESR) and the secrecy outage probability as security metrics, and
a new closed-form expression is presented for the average symbol error rate
(SER) as a reliability measure over Rayleigh fading channels. We further
explicitly characterize the high signal-to-noise ratio slope and power offset
of the ESR to highlight the impacts of system parameters on the ESR. In
addition, we examine the diversity order of the proposed scheme to reveal the
achievable secrecy performance advantage. Finally, the secrecy and reliability
diversity-multiplexing tradeoff of the optimized network are provided.
Numerical results highlight that the ESR performance of the proposed JRP scheme
for NCE and CE cases is increased with respect to the number of untrustworthy
relays.Comment: 18 pages, 10 figures, IEEE Transactions on Information Forensics and
Security (In press
Link-State Based Decode-Forward Schemes for Two-way Relaying
In this paper, we analyze a composite decode-and-forward scheme for the
two-way relay channel with a direct link. During transmission, our scheme
combines both block Markov coding and an independent coding scheme similar to
network coding at the relay. The main contribution of this work is to examine
how link state impacts the allocation of power between these two distinct
techniques, which in turn governs the necessity of each technique in achieving
the largest transmission rate region. We analytically determine the link-state
regimes and associated relaying techniques. Our results illustrate an
interesting trend: when the user-to-relay link is marginally stronger than the
direct link, it is optimal to use only independent coding. In this case, the
relay need not use full power. However, for larger user-to-relay link gains,
the relay must supplement independent coding with block Markov coding to
achieve the largest rate region. These link-state regimes are important for the
application of two-way relaying in 5G networks, such as in D2D mode or
relay-aided transmission.Comment: To be presented at Globecom 2014, Emerging Technologies for 5G
Wireless Cellular Networks (Wi5G
- …