48 research outputs found
Recommended from our members
Time Domain SAR Processing with GPUs for Airborne Platforms
A time-domain backprojection processor for airborne synthetic aperture radar (SAR) has been developed at the University of Massachusetts’ Microwave Remote Sensing Lab (MIRSL). The aim of this work is to produce a SAR processor capable of addressing the motion compensation issues faced by frequency-domain processing algorithms, in order to create well focused SAR imagery suitable for interferometry. The time-domain backprojection algorithm inherently compensates for non-linear platform motion, dependent on the availability of accurate measurements of the motion. The implementation must manage the relatively high computational burden of the backprojection algorithm, which is done using modern graphics processing units (GPUs), programmed with NVIDIA’s CUDA language. An implementation of the Non-Equispaced Fast Fourier Transform (NERFFT) is used to enable efficient and accurate range interpolation as a critical step of the processing. The phase of time- domain processed imagery is dif erent than that of frequency-domain imagery, leading to a potentially different approach to interferometry. This general purpose SAR processor is designed to work with a novel, dual-frequency S- and Ka-band radar system developed at MIRSL as well as the UAVSAR instrument developed by NASA’s Jet Propulsion Laboratory. These instruments represent a wide range of SAR system parameters, ensuring the ability of the processor to work with most any airborne SAR. Results are presented from these two systems, showing good performance of the processor itself
A Downward-looking Three-dimensional Imaging Method for Airborne FMCW SAR Based on Array Antennas
AbstractWith regard to problems in conventional synthetic aperture radar (SAR), such as imaging distortion, beam limitation and failure in acquiring three-dimensional (3-D) information, a downward-looking 3-D imaging method based on frequency modulated continuous wave (FMCW) and digital beamforming (DBF) technology for airborne SAR is presented in this study. Downward-looking 3-D SAR signal model is established first, followed by introduction of virtual antenna optimization factor and discussion of equivalent-phase-center compensation. Then, compensation method is provided according to reside video phase (RVP) and slope term for FMCW SAR. As multiple receiving antennas are applied to downward-looking 3-D imaging SAR, range cell migration correction (RCMC) turns to be more complex, and corrective measures are proposed. In addition, DBF technology is applied in realizing cross-track resolution. Finally, to validate the proposed method, magnitude of slice, peak sidelobe ratio (PSLR), integrated sidelobe ratio (ISLR) and two-dimensional (2-D) contour plot of impulse response function (IRF) of point target in three dimensions are demonstrated. Satisfactory performances are shown by simulation results
Frequency-modulated continuous-wave synthetic-aperture radar: improvements in signal processing
With the advance of solid state devices, frequency-modulated continuous-wave (FMCW) designs have recently been used in synthetic-aperture radar (SAR) to decrease cost, size, weight and power consumption, making it deployable on smaller mobile plat-forms, including small (< 25 kg) unmanned aerial vehicle(s) (UAV). To foster its mobile uses, several SAR capabilities were studied: moving target indication (MTI) for increased situational awareness, bistatic operation, e.g. in UAV formation flights, for increased range, and signal processing algorithms for faster real-time performance.
Most off-the-shelf SAR systems for small mobile platforms are commercial proprie-tary and/or military (ITAR, International Trades in Arms Regulations) restricted. As such, it necessitated the design and build of a prototype FMCW SAR system at the early stage to serve as a research tool. This enabled unrestricted hardware and software modifica-tions and experimentation.
A model to analyze the triangularly modulated (TM) linear frequency modulated (LFM) waveform as one signal was established and used to develop a MTI algorithm which is effective for slow moving targets detection. Experimental field data collected by the prototyped FMCW SAR was then used to validate and demonstrate the effectiveness of the proposed MTI method.
A bistatic FMCW SAR model was next introduced: Bistatic configuration is a poten-tial technique to overcome the power leakage problem in monostatic FMCW SAR. By mounting the transmitter and receiver on spatially separate mobile (UAV) platforms in formation deployment, the operation range of a bistatic FMCW SAR can be significantly improved. The proposed approximation algorithm established a signal model for bistatic FMCW SAR by using the Fresnel approximation. This model allows the existing signal processing algorithms to be used in bistatic FMCW SAR image generation without sig-nificant modification simplifying bistatic FMCW SAR signal processing.
The proposed range migration algorithm is a versatile and efficient FMCW SAR sig-nal processing algorithm which requires less memory and computational load than the traditional RMA. This imaging algorithm can be employed for real-time image genera-tion by the FMCW SAR system on mobile platforms. Simulation results verified the pro-posed spectral model and experimental data demonstrated the effectiveness of the modi-fied RMA
Experimental Results of High-Resolution ISAR Imaging of Ground-Moving Vehicles with a Stationary FMCW Rada
In the paper experimental results of ISAR (Inverse Synthetic Aperture Radar) processing obtained with highresolution radar are presented. Targets under observation were ground moving vehicles, such as cars, trucks and tractors. The experiments were performed with a FMCW (Frequency- Modulated Continuous-Wave) radar operating at 94 GHz with almost 1 GHz of bandwidth. Due to the measurement scenario more typical for SAR (Synthetic Aperture Radar), than ISAR, i.e. targets moving along straight line crossing the antenna beam, algorithms usually applied for SAR processing have been used
Motion Compensation for Near-Range Synthetic Aperture Radar Applications
The work focuses on the analysis of influences of motion errors on near-range SAR applications and design of specific motion measuring and compensation algorithms. First, a novel metric to determine the optimum antenna beamwidth is proposed. Then, a comprehensive investigation of influences of motion errors on the SAR image is provided. On this ground, new algorithms for motion measuring and compensation using low cost inertial measurement units (IMU) are developed and successfully demonstrated
Processing of Sliding Spotlight and TOPS SAR Data Using Baseband Azimuth Scaling
This paper presents an efficient phase preserving processor for the focusing of data acquired in sliding spotlight and TOPS (Terrain Observation by Progressive Scans) imaging modes. They share in common a linear variation of the Doppler centroid along the azimuth dimension, which is due to a steering of the antenna (either mechanically or electronically) throughout the data take. Existing approaches for the azimuth processing can become inefficient due to the additional processing to overcome the folding in the focused domain. In this paper a new azimuth scaling approach is presented to perform the azimuth processing, whose kernel is exactly the same for sliding spotlight and TOPS modes. The possibility to use the proposed approach to process ScanSAR data, as well as a discussion concerning staring spotlight, are also included. Simulations with point-targets and real data acquired by TerraSAR-X in sliding spotlight and TOPS modes are used to validate the developed algorithm
Comparison and analysis of point target reference spectrum of FMCW synthetic aperture imaging sensor
An Improved and Novel De-Ramping Technique for Linear Frequency Modulated Continuous Wave Synthetic Aperture Radar
In this paper, a novel de-ramping technique for linear frequency modulated continuous wave (LFM-CW) synthetic aperture radar (SAR), named as the fixed delay deramping technique is introduced. The received and adaptive fixed delay version of transmitted signals was mixed to increase the processing gain of a system. Furthermore, in this study, the practical mode of de-ramping technique for LFM-CW SAR was considered against the related works assumed as the ideal mode. Similar to this work, the practical mode should consider the desired and undesired part of the de-ramped signal. In addition, the closed form equations for processing gain of the proposed deramping technique were derived. All in all, the simulation section illustrates a substantial improvement of the processing gain of the fixed de-ramping based on the proposed approach in comparison to the conventional methods
Recommended from our members
InSAR Simulations for SWOT and Dual Frequency Processing for Topographic Measurements
In Earth remote sensing precise characterization of the backscatter coefficient is important to extract valuable information about the observed target. A system that eliminates platform motion during near-nadir airborne observations is presented in this thesis, showing an improvement on the accuracy of measurements for a Ka- band scatterometer previously developed at Microwave Remote Sensing Laboratory (MIRSL). These very same results are used to simulate the reflectivity of such targets as seen from a spaceborne radar and estimate height errors based on mission-specific geometry. Finally, data collected from a dual-frequency airborne interferometer com- prised by the Ka-band system and an S-band radar is processed and analyzed to estimate forest heights