A CMOS spectrum analyzer frontend for cognitive radio achieving +25dBm IIP3 and −169 dBm/Hz DANL

A dual RF-receiver preceded by discrete-step attenuators is implemented in 65nm CMOS and operates from 0.3– 1.0 GHz. The noise of the receivers is reduced by cross-correlating the two receiver outputs in the digital baseband, allowing attenuation of the RF input signal to increase linearity. With this technique a displayed average noise level below -169 dBm/Hz is obtained with +25 dBm IIP3, giving a spurious-free dynamic range of 89 dB in 1 MHz resolution bandwidth

Compressive Sampling as an Enabling Solution for Energy-Efficient and Rapid Wideband RF Spectrum Sensing in Emerging Cognitive Radio Systems

Wireless systems have become an essential part of every sector of the national and global economy. In addition to existing commercial systems including GPS, mobile cellular, and WiFi communications, emerging systems like video over wireless, the Internet of Things, and machine-to-machine communications are expected to increase mobile wireless data traffic by several orders of magnitude over the coming decades, while natural resources like energy and radio spectrum remain scarce. The projected growth of the number of connected nodes into the trillions in the near term and increasing user demand for instantaneous, over-the-air access to large volumes of content will require a 1000-fold increase in network wireless data capacity by 2020. Spectrum is the lifeblood of these future wireless networks and the ’data storm’ driven by emerging technologies will lead to a pressing ’artificial’ spectrum scarcity. Cognitive radio is a paradigm proposed to overcome the existing challenge of underutilized spectrum. Emerging cognitive radio systems employing multi-tiered, shared-spectrum access are expected to deliver superior spectrum efficiency over existing scheduled-access systems; they have several device categories (3 or more tiers) with different access privileges. We focus on lower tiered ’smart’ devices that evaluate the spectrum dynamically and opportunistically use the underutilized spectrum. These ’smart’ devices require spectrum sensing for incumbent detection and interferer avoidance. Incumbent detection will rely on database lookup or narrowband high-sensitivity sensing. Integrated interferer detectors, on the other hand, need to be fast, wideband, and energy efficient, while requiring only moderate sensitivity. These future 'smart' devices operating in small cell environments will need to rapidly (in 10s of μs) detect a few (e.g. 3 to 6) strong interferers within roughly a 1GHz span and accordingly reconfigure their hardware resources or request adjustments to their wireless connection consisting of primary and secondary links in licensed and unlicensed spectrum. Compressive sampling (CS), an evolutionary sensing/sampling paradigm that changes the perception of sampling, has been extensively used for image reconstruction. It has been shown that a single pixel camera that exploits CS has the ability to obtain an image with a single detection element, while measuring the image fewer times than the number of pixels with the prior assumption of sparsity. We exploited CS in the presented works to take a ’snapshot’ of the spectrum with low energy consumption and high frequency resolutions. Compressive sampling is applied to break the fixed trade-off between scan time, resolution bandwidth, hardware complexity, and energy consumption. This contrasts with traditional spectrum scanning solutions, which have constant energy consumption in all architectures to first order and a fixed trade-off between scan time and resolution bandwidth. Compressive sampling enables energy-efficient, rapid, and wideband spectrum sensing with high frequency resolutions at the expense of degraded instantaneous dynamic range due to the noise folding. We have developed a quadrature analog-to-information converter (QAIC), a novel CS rapid spectrum sensing technique for band-pass signals. Our first wideband, energy-efficient, and rapid interferer detector end-to-end system with a QAIC senses a wideband 1GHz span with a 20MHz resolution bandwidth and successfully detects up to 3 interferers in 4.4μs. The QAIC offers 50x faster scan time compared to traditional sweeping spectrum scanners and 6.3x the compressed aggregate sampling rate of traditional concurrent Nyquist-rate approaches. The QAIC is estimated to be two orders of magnitude more energy efficient than traditional spectrum scanners/sensors and one order of magnitude more energy efficient than existing low-pass CS spectrum sensors. We implemented a CS time-segmented quadrature analog-to-information converter (TS-QAIC) that extends the physical hardware through time segmentation (e.g. 8 physical I/Q branches to 16 I/Q through time segmentation) and employs adaptive thresholding to react to the signal conditions without additional silicon cost and complexity. The TS-QAIC rapidly detects up to 6 interferers in the PCAST spectrum between 2.7 and 3.7GHz with a 10.4μs sensing time for a 20MHz RBW with only 8 physical I/Q branches while consuming 81.2mW from a 1.2V supply. The presented rapid sensing approaches enable system scaling in multiple dimensions such as ADC bits, the number of samples, and the number of branches to meet user performance goals (e.g. the number of detectable interferers, energy consumption, sensitivity and scan time). We envision that compressive sampling opens promising avenues towards energy-efficient and rapid sensing architectures for future cognitive radio systems utilizing multi-tiered, shared spectrum access

Advanced Trends in Wireless Communications

Physical limitations on wireless communication channels impose huge challenges to reliable communication. Bandwidth limitations, propagation loss, noise and interference make the wireless channel a narrow pipe that does not readily accommodate rapid flow of data. Thus, researches aim to design systems that are suitable to operate in such channels, in order to have high performance quality of service. Also, the mobility of the communication systems requires further investigations to reduce the complexity and the power consumption of the receiver. This book aims to provide highlights of the current research in the field of wireless communications. The subjects discussed are very valuable to communication researchers rather than researchers in the wireless related areas. The book chapters cover a wide range of wireless communication topics

A CMOS-Compatible Spectrum Analyzer for Cognitive Radio Exploiting Crosscorrelation to Improve Linearity and Noise Performance

Abstract—A spectrum analyzer requires a high linearity to handle strong signals, and at the same time a low NF to enable detection of much weaker signals. This is not only important for lab equipment, but also for the spectrum sensing part of cognitive radio, where low cost and integration is at a premium. Often there is a trade-off between linearity and noise: improving one degrades the other. Crosscorrelation can break this tradeoff by reducing noise at the expense of measurement time. An existing RF frontend in CMOS-technology with IIP3=+11dBm and NF=5.5 dB is duplicated and attenuators are put in front to increase linearity to IIP3=+24 dBm. The attenuation degrades NF, but by using crosscorrelation of the outputs of the two frontends, the effective NF is reduced to around 5 dB. In total, this results in a spurious-free dynamic range of 88 dB in 1MHz resolution bandwidth

A CMOS-Compatible Spectrum Analyzer for Cognitive Radio Exploiting Crosscorrelation to Improve Linearity and Noise Performance

A spectrum analyzer requires a high linearity to handle strong signals, and at the same time a low NF to enable detection of much weaker signals. This is not only important for lab equipment, but also for the spectrum sensing part of cognitive radio, where low cost and integration is at a premium. Often there is a trade-off between linearity and noise: improving one degrades the other. Crosscorrelation can break this tradeoff by reducing noise at the expense of measurement time. An existing RF frontend in CMOS-technology with IIP3=+11dBm and NF=5.5 dB is duplicated and attenuators are put in front to increase linearity to IIP3=+24 dBm. The attenuation degrades NF, but by using crosscorrelation of the outputs of the two frontends, the effective NF is reduced to around 5 dB. In total, this results in a spurious-free dynamic range of 88 dB in 1MHz resolution bandwidth

Proceedings of the Third International Mobile Satellite Conference (IMSC 1993)

Satellite-based mobile communications systems provide voice and data communications to users over a vast geographic area. The users may communicate via mobile or hand-held terminals, which may also provide access to terrestrial cellular communications services. While the first and second International Mobile Satellite Conferences (IMSC) mostly concentrated on technical advances, this Third IMSC also focuses on the increasing worldwide commercial activities in Mobile Satellite Services. Because of the large service areas provided by such systems, it is important to consider political and regulatory issues in addition to technical and user requirements issues. Topics covered include: the direct broadcast of audio programming from satellites; spacecraft technology; regulatory and policy considerations; advanced system concepts and analysis; propagation; and user requirements and applications

Recent Advances in Signal Processing

The signal processing task is a very critical issue in the majority of new technological inventions and challenges in a variety of applications in both science and engineering fields. Classical signal processing techniques have largely worked with mathematical models that are linear, local, stationary, and Gaussian. They have always favored closed-form tractability over real-world accuracy. These constraints were imposed by the lack of powerful computing tools. During the last few decades, signal processing theories, developments, and applications have matured rapidly and now include tools from many areas of mathematics, computer science, physics, and engineering. This book is targeted primarily toward both students and researchers who want to be exposed to a wide variety of signal processing techniques and algorithms. It includes 27 chapters that can be categorized into five different areas depending on the application at hand. These five categories are ordered to address image processing, speech processing, communication systems, time-series analysis, and educational packages respectively. The book has the advantage of providing a collection of applications that are completely independent and self-contained; thus, the interested reader can choose any chapter and skip to another without losing continuity

Sensors and Systems for Indoor Positioning

This reprint is a reprint of the articles that appeared in Sensors' (MDPI) Special Issue on “Sensors and Systems for Indoor Positioning". The published original contributions focused on systems and technologies to enable indoor applications

Abstracts on Radio Direction Finding (1899 - 1995)

The files on this record represent the various databases that originally composed the CD-ROM issue of "Abstracts on Radio Direction Finding" database, which is now part of the Dudley Knox Library's Abstracts and Selected Full Text Documents on Radio Direction Finding (1899 - 1995) Collection. (See Calhoun record https://calhoun.nps.edu/handle/10945/57364 for further information on this collection and the bibliography). Due to issues of technological obsolescence preventing current and future audiences from accessing the bibliography, DKL exported and converted into the three files on this record the various databases contained in the CD-ROM. The contents of these files are: 1) RDFA_CompleteBibliography_xls.zip [RDFA_CompleteBibliography.xls: Metadata for the complete bibliography, in Excel 97-2003 Workbook format; RDFA_Glossary.xls: Glossary of terms, in Excel 97-2003 Workbookformat; RDFA_Biographies.xls: Biographies of leading figures, in Excel 97-2003 Workbook format]; 2) RDFA_CompleteBibliography_csv.zip [RDFA_CompleteBibliography.TXT: Metadata for the complete bibliography, in CSV format; RDFA_Glossary.TXT: Glossary of terms, in CSV format; RDFA_Biographies.TXT: Biographies of leading figures, in CSV format]; 3) RDFA_CompleteBibliography.pdf: A human readable display of the bibliographic data, as a means of double-checking any possible deviations due to conversion