2,078 research outputs found
Transport of video over partial order connections
A Partial Order and partial reliable Connection (POC) is an end-to-end transport connection authorized to deliver objects in an order that can differ from the transmitted one. Such a connection is also authorized to lose some objects. The POC concept is motivated by the fact that heterogeneous best-effort networks such as Internet are plagued by unordered delivery of packets and losses, which tax the performances of current applications and protocols. It has been shown, in several research works, that out of order delivery is able to alleviate (with respect to CO service) the use of end systems’ communication resources. In this paper, the efficiency of out-of-sequence delivery on MPEG video streams processing is studied. Firstly, the transport constraints (in terms of order and reliability) that can be relaxed by MPEG video decoders, for improving video transport, are detailed. Then, we analyze the performance gain induced by this approach in terms of blocking times and recovered errors. We demonstrate that POC connections fill not only the conceptual gap between TCP and UDP but also provide real performance improvements for the transport of multimedia streams such MPEG video
Improving the Performance of Wireless LANs
This book quantifies the key factors of WLAN performance and describes methods for improvement. It provides theoretical background and empirical results for the optimum planning and deployment of indoor WLAN systems, explaining the fundamentals while supplying guidelines for design, modeling, and performance evaluation. It discusses environmental effects on WLAN systems, protocol redesign for routing and MAC, and traffic distribution; examines emerging and future network technologies; and includes radio propagation and site measurements, simulations for various network design scenarios, numerous illustrations, practical examples, and learning aids
SURVEY STUDY FOR VEHICULAR AD HOC NETWORKS PERFORMANCE IN CITY AND URBAN RESIDENTIAL AREAS
This thesis it survey study for VANET (Vehicular Ad-Hoc Networks) and it performance in city and urban residential areas, when the the number of vehicles on roads is increasing annually, due to the higher amount of traffic, there are more accidents associated with road traffic complexity. VANET can be used to detect dangerous situations which are forwarded to the driver assistant system by monitoring the traffic status.fi=Opinnäytetyö kokotekstinä PDF-muodossa.|en=Thesis fulltext in PDF format.|sv=Lärdomsprov tillgängligt som fulltext i PDF-format
Recommended from our members
Design and optimization of QoS-based medium access control protocols for next-generation wireless LANs
This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.In recent years, there have been tremendous advances in wireless & mobile communications, including wireless radio techniques, networking protocols, and mobile devices. It is expected that different
broadband wireless access technologies, e.g., WiFi (IEEE 802.11) and WiMAX (IEEE 802.16) will coexist in the future. In the meantime, multimedia applications have experienced an explosive growth with increasing user demands. Nowadays, people expect to receive high-speed video, audio, voice and web services even when being mobile. The key question that needs to be answered, then, is how do we ensure that users always have the "best" network performance with the "lowest" costs in such complicated situations? The latest IEEE 802.11n standards attains rates of more than 100 Mbps by introducing innovative enhancements at the PHY and MAC layer, e.g. MIMO and Frame Aggregation, respectively. However, in this thesis we demonstrate that frame aggregation's performance adheres due to the EDCA scheduler's priority mechanism and consequently resulting in the network's poor overall performance. Short waiting times for high priority flows into the aggregation queue resolves to poor channel utilization. A Delayed Channel Access algorithm was designed to intentionally postpone the channel access procedure so that the number of packets in a formed frame can be increased and so will the network's overall performance. However, in some cases, the DCA algorithm has a negative impact on the applications that utilize the TCP protocol, especially the when small TCP window sizes are engaged. So, the TCP process starts to refrain from sending data due to delayed acknowledgements and the overall throughput drops. In this thesis, we address the above issues by firstly demonstrating the potential performance benefits of frame aggregation over the next generation wireless networks. The efficiency and behaviour of frame aggregation within a single queue, are mathematically analysed with the aid of a M=G[a;b]=1=K model. Results show that a trade-off choice has to be taken into account over minimizing the waiting time or maximizing utilization. We also point out that there isn't an optimum batch collection rule which can be assumed as generally valid but individual cases have to be considered separately. Secondly, we demonstrate through extensive simulations that by introducing a method, the DCA algorithm, which dynamically determines and adapts batch collections based upon the traffic's characteristics, QoS requirements
and server's maximum capacity, also improves e ciency. Thirdly, it is important to understand the behaviour of the TCP
ows over the WLAN and the influence that DCA has over the degrading performance of the TCP protocol. We investigate the cause of the problem and provide the foundations of designing and implementing possible solutions. Fourthly, we introduce two innovative proposals, one amendment and one extension to the original DCA algorithm, called Adaptive DCA and Selective DCA, respectively. Both solutions have been implemented in OPNET and extensive simulation runs over a wide set of scenarios show their effectiveness over the network's overall performance, each in its own way.This study was supported by the Engineering and Physical Sciences Research Council (EPSRC)
Quality of service differentiation for multimedia delivery in wireless LANs
Delivering multimedia content to heterogeneous devices over a variable networking environment while maintaining high quality levels involves many technical challenges. The research reported in this thesis presents a solution for Quality of Service (QoS)-based service differentiation when delivering multimedia content over the wireless LANs. This thesis has three major contributions outlined below:
1. A Model-based Bandwidth Estimation algorithm (MBE), which estimates the available bandwidth based on novel TCP and UDP throughput models over IEEE 802.11 WLANs. MBE has been modelled, implemented, and tested through simulations and real life testing. In comparison with other bandwidth estimation techniques, MBE shows better performance in terms of error rate, overhead, and loss.
2. An intelligent Prioritized Adaptive Scheme (iPAS), which provides QoS service differentiation for multimedia delivery in wireless networks. iPAS assigns dynamic priorities to various streams and determines their bandwidth share by employing a probabilistic approach-which makes use of stereotypes. The total bandwidth to be allocated is estimated using MBE. The priority level of individual stream is variable and dependent on stream-related characteristics and delivery QoS parameters. iPAS can be deployed seamlessly over the original IEEE 802.11 protocols and can be included in the IEEE 802.21 framework in order to optimize the control signal communication. iPAS has been modelled, implemented, and evaluated via simulations. The results demonstrate that iPAS achieves better performance than the equal channel access mechanism over IEEE 802.11 DCF and a service differentiation scheme on top of IEEE 802.11e EDCA, in terms of fairness, throughput, delay, loss, and estimated PSNR. Additionally, both objective and subjective video quality assessment have been performed using a prototype system.
3. A QoS-based Downlink/Uplink Fairness Scheme, which uses the stereotypes-based structure to balance the QoS parameters (i.e. throughput, delay, and loss) between downlink and uplink VoIP traffic. The proposed scheme has been modelled and tested through simulations. The results show that, in comparison with other downlink/uplink fairness-oriented solutions, the proposed scheme performs better in terms of VoIP capacity and fairness level between downlink and uplink traffic
Performance metrics and routing in vehicular ad hoc networks
The aim of this thesis is to propose a method for enhancing the performance of Vehicular Ad hoc
Networks (VANETs). The focus is on a routing protocol where performance metrics are used to
inform the routing decisions made. The thesis begins by analysing routing protocols in a random
mobility scenario with a wide range of node densities. A Cellular Automata algorithm is
subsequently applied in order to create a mobility model of a highway, and wide range of density
and transmission range are tested. Performance metrics are introduced to assist the prediction of
likely route failure. The Good Link Availability (GLA) and Good Route Availability (GRA)
metrics are proposed which can be used for a pre-emptive action that has the potential to give
better performance. The implementation framework for this method using the AODV routing
protocol is also discussed. The main outcomes of this research can be summarised as identifying
and formulating methods for pre-emptive actions using a Cellular Automata with NS-2 to
simulate VANETs, and the implementation method within the AODV routing protocol
Design and implementation of simulation tools, protocols and architectures to support service platforms on vehicular networks
Tesis por compendioProducts related with Intelligent Transportation Systems (ITS) are becoming
a reality on our roads.
All car manufacturers are starting to include Internet
access in their vehicles and to integrate smartphones directly from the
dashboard, but more and more services will be introduced in the near future.
Connectivity through "vehicular networks" will become a cornerstone of every
new proposal, and offering an adequate quality of service is obviously desirable.
However, a lot of work is needed for vehicular networks to offer performances
similar to those of the wired networks.
Vehicular networks can be characterized by two main features: high variability
due to mobility levels that can reach up to 250 kilometers per hour,
and heterogeneity, being that various competing versions from different vendors
have and will be released. Therefore, to make the deployment of efficient
services possible, an extensive study must be carried out and adequate tools
must be proposed and developed. This PhD thesis addresses the service deployment
problem in these networks at three different levels: (i) the physical
and link layer, showing an exhaustive analysis of the physical channel and
models; (ii) the network layer, proposing a forwarding protocol for IP packets;
and (iii) the transport layer, where protocols are proposed to improve data
delivery.
First of all, the two main wireless technologies used in vehicular networks
where studied and modeled, namely the 802.11 family of standards, particularly
802.11p, and the cellular networks focusing on LTE. Since 802.11p is a
quite mature standard, we defined (i) a propagation and attenuation model
capable of replicating the transmission range and the fading behavior of real
802.11p devices, both in line-of-sight conditions and when obstructed by small
obstacles, and (ii) a visibility model able to deal with large obstacles, such
as buildings and houses, in a realistic manner.
Additionally, we proposed a
model based on high-level performance indicators (bandwidth and delay) for
LTE, which makes application validation and evaluation easier.
At the network layer, a hybrid protocol called AVE is proposed for packet
forwarding by switching among a set of standard routing strategies. Depending
on the specific scenario, AVE selects one out of four different routing solutions:
a) two-hop direct delivery, b) Dynamic MANET On-demand (DYMO), c)
greedy georouting, and d) store-carry-and-forward technique, to dynamically
adapt its behavior to the specific situation.
At the transport layer, we proposed a content delivery protocol for reliable
and bidirectional unicast communication in lossy links that improves content
delivery in situations where the wireless network is the bottleneck.
It has
been designed, validated, optimized, and its performance has been analyzed
in terms of throughput and resource efficiency.
Finally, at system level, we propose an edge-assisted computing model that
allows reducing the response latency of several queries by placing a computing
unit at the network edge. This way, traffic traversal through the Internet is
avoided when not needed.
This scheme could be used in both 802.11p and
cellular networks, and in this thesis we decided to focus on its evaluation using
LTE networks.
The platform presented in this thesis combines all the individual efforts to
create a single efficient platform. This new environment could be used by any
provider to improve the quality of the user experience obtainable through the
proposed vehicular network-based services.Los productos relacionados con los Sistemas Inteligentes de Transporte (ITS)
se están transformando en una realidad en nuestras carreteras. Todos los
fabricantes de coches comienzan a incluir acceso a internet en sus vehículos y a
facilitar su integración con los teléfonos móviles, pero más y más servicios se
introducirán en el futuro.
La conectividad usando las "redes vehiculares" se
convertirá en la piedra angular de cada nueva propuesta, y ofrecer una calidad
de servicio adecuada será, obviamente, deseable. Sin embargo, se necesita
una gran cantidad de trabajo para que las redes vehiculares ofrezcan un
rendimiento similar al de las redes cableadas.
Las redes vehiculares quedan definidas por sus dos características básicas:
alto dinamismo, pues los nodos pueden alcanzar una velocidad relativa de más
de 250 km/h; y heterogeneidad, por la gran cantidad de propuestas diferentes
que los fabricantes están lanzando al mercado. Por ello, para hacer posible el
despliegue de servicios sobre ellas, se impone la necesidad de hacer un estudio
en profundidad de este entorno, y deben de proponerse y desarrollarse las
herramientas adecuadas.
Esta tesis ataca la problemática del despliegue de servicios en estas redes
a tres niveles diferentes: (i) el nivel físico y de enlace, mostrando varios análisis
en profundidad del medio físico y modelos derivados para su simulación;
(ii) el nivel de red, proponiendo un protocolo de difusión de la información
para los paquetes IP; y (iii) el nivel de transporte, donde otros protocolos son
propuestos para mejorar el rendimiento del transporte de datos.
En primer lugar, se han estudiado y modelado las dos principales tecnologías
inalámbricas que se utilizan para la comunicación en redes vehiculares,
la rama de estándares 802.11, en concreto 802.11p; y la comunicación celular,
en particular LTE. Dado que el estándar 802.11p es un estándar bastante
maduro, nos centramos en crear (i) un modelo de propagación y atenuación
capaz de replicar el rango de transmisión de dispositivos 802.11p reales, en
condiciones de visión directa y obstrucción por pequeños obstáculos, y (ii) un
modelo de visibilidad capaz de simular el efecto de grandes obstáculos, como
son los edifcios, de una manera realista.
Además, proponemos un modelo
basado en indicadores de rendimiento de alto nivel (ancho de banda y retardo)
para LTE, que facilita la validación y evaluación de aplicaciones.
En el plano de red, se propone un protocolo híbrido, llamado AVE, para
el encaminamiento y reenvío de paquetes usando un conjunto de estrategias
estándar de enrutamiento. Dependiendo del escenario, AVE elige entre cuatro
estrategias diferentes: a) entrega directa a dos saltos, b) Dynamic MANET
On-demand (DYMO) c) georouting voraz, y d) una técnica store-carry-and-
forward, para adaptar su comportamiento dinámicamente a cada situación.
En el plano de transporte, se propone un protocolo bidireccional de distribución
de contenidos en canales con pérdidas que mejora la entrega de contenidos
en situaciones en las que la red es un cuello de botella, como las redes
inalámbricas.
Ha sido diseñado, validado, optimizado, y su rendimiento ha
sido analizado en términos de productividad y eficiencia en la utilización de
recursos.
Finalmente, a nivel de sistema, proponemos un modelo de computación
asistida que permite reducir la latencia en la respuesta a muchas consultas
colocando una unidad de computación en el borde de la red, i.e., la red de
acceso. Este esquema podría ser usado en redes basadas en 802.11p y en redes
celulares, si bien en esta tesis decidimos centrarnos en su evaluación usando
redes LTE.
La plataforma presentada en esta tesis combina todos los esfuerzos individuales
para crear una plataforma única y eficiente. Este nuevo entorno puede
ser usado por cualquier proveedor para mejorar la calidad de la experiencia de
usuario en los servicios desplegados sobre redes vehiculares.Els productes relacionats amb els sistemes intel · ligents de transport (ITS)
s'estan transformant en una realitat en les nostres carreteres. Tots els fabri-
cants de cotxes comencen a incloure accés a internet en els vehicles i a facilitar-
ne la integració amb els telèfons mòbils, però en el futur més i més serveis s'hi
introduiran. La connectivitat usant les xarxes vehicular esdevindrà la pedra
angular de cada nova proposta, i oferir una qualitat de servei adequada serà,
òbviament, desitjable.
No obstant això, es necessita una gran quantitat de
treball perquè les xarxes vehiculars oferisquen un rendiment similar al de les
xarxes cablejades.
Les xarxes vehiculars queden definides per dues característiques bàsiques:
alt dinamisme, ja que els nodes poden arribar a una velocitat relativa de més
de 250 km/h; i heterogeneïtat, per la gran quantitat de propostes diferents
que els fabricants estan llançant al mercat.
Per això, per a fer possible el
desplegament de serveis sobre aquestes xarxes, s'imposa la necessitat de fer un
estudi en profunditat d'aquest entorn, i cal proposar i desenvolupar les eines
adequades.
Aquesta tesi ataca la problemàtica del desplegament de serveis en aquestes
xarxes a tres nivells diferents: (i) el nivell físic i d'enllaç , mostrant diverses
anàlisis en profunditat del medi físic i models derivats per simular-lo; (ii) el
nivell de xarxa, proposant un protocol de difusió de la informació per als
paquets IP; i (iii) el nivell de transport, on es proposen altres protocols per a
millorar el rendiment del transport de dades.
En primer lloc, s'han estudiat i modelat les dues principals tecnologies
sense fils que s'utilitzen per a la comunicació en xarxes vehiculars, la branca
d'estàndards 802.11, en concret 802.11p; i la comunicació cel · lular, en partic-
ular LTE. Atès que l'estàndard 802.11p és un estàndard bastant madur, ens
centrem a crear (i) un model de propagació i atenuació capaç de replicar el
rang de transmissió de dispositius 802.11p reals, en condicions de visió directa
i obstrucció per petits obstacles, i (ii) un model de visibilitat capaç de simular
l'efecte de grans obstacles, com són els edificis, d'una manera realista. A més,
proposem un model basat en indicadors de rendiment d'alt nivell (ample de
banda i retard) per a LTE, que facilita la validació i l'avaluació d'aplicacions.
En el pla de xarxa, es proposa un protocol híbrid, anomenat AVE, per
a l'encaminament i el reenviament de paquets usant un conjunt d'estratègies
estàndard d'encaminament.
Depenent de l'escenari , AVE tria entre quatre
estratègies diferents: a) lliurament directe a dos salts, b) Dynamic MANET
On-demand (DYMO) c) georouting voraç, i d) una tècnica store-carry-and-
forward, per a adaptar-ne el comportament dinàmicament a cada situació.
En el pla de transport, es proposa un protocol bidireccional de distribució
de continguts en canals amb pèrdues que millora el lliurament de continguts
en situacions en què la xarxa és un coll de botella, com les xarxes sense fils.
Ha sigut dissenyat, validat, optimitzat, i el seu rendiment ha sigut analitzat
en termes de productivitat i eficiència en la utilització de recursos.
Finalment, a nivell de sistema, proposem un model de computació assistida
que permet reduir la latència en la resposta a moltes consultes col · locant una
unitat de computació a la vora de la xarxa, és a dir, la xarxa d'accés. Aquest
esquema podria ser usat en xarxes basades en 802.11p i en xarxes cel · lulars, si
bé en aquesta tesi decidim centrar-nos en la seua avaluació usant xarxes LTE.
La plataforma presentada en aquesta tesi combina tots els esforços indi-
viduals per a crear una plataforma única i eficient. Aquest nou entorn pot ser
usat per qualsevol proveïdor per a millorar la qualitat de l'experiència d'usuari
en els serveis desplegats sobre xarxes vehiculars.Báguena Albaladejo, M. (2017). Design and implementation of simulation tools, protocols and architectures to support service platforms on vehicular networks [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/85333TESISCompendi
A Survey on Wireless Security: Technical Challenges, Recent Advances and Future Trends
This paper examines the security vulnerabilities and threats imposed by the
inherent open nature of wireless communications and to devise efficient defense
mechanisms for improving the wireless network security. We first summarize the
security requirements of wireless networks, including their authenticity,
confidentiality, integrity and availability issues. Next, a comprehensive
overview of security attacks encountered in wireless networks is presented in
view of the network protocol architecture, where the potential security threats
are discussed at each protocol layer. We also provide a survey of the existing
security protocols and algorithms that are adopted in the existing wireless
network standards, such as the Bluetooth, Wi-Fi, WiMAX, and the long-term
evolution (LTE) systems. Then, we discuss the state-of-the-art in
physical-layer security, which is an emerging technique of securing the open
communications environment against eavesdropping attacks at the physical layer.
We also introduce the family of various jamming attacks and their
counter-measures, including the constant jammer, intermittent jammer, reactive
jammer, adaptive jammer and intelligent jammer. Additionally, we discuss the
integration of physical-layer security into existing authentication and
cryptography mechanisms for further securing wireless networks. Finally, some
technical challenges which remain unresolved at the time of writing are
summarized and the future trends in wireless security are discussed.Comment: 36 pages. Accepted to Appear in Proceedings of the IEEE, 201
- …