73 research outputs found
Recommended from our members
Ultrasound Data Communications for Ultra-low-power Wake-up in Sensor Nodes
In the power-starved wireless sensor node application, the main transceiver has to be duty-cycled to prolong the node battery lifetime. Wake-up is among the lowest power schemes to accomplish this; an always ON low-power receiver called the wake-up receiver is used to turn ON the main receiver when needed. In this thesis, we have demonstrated ultra-low-power wake-up by using through-air wireless ultrasound. We have achieved more than an order of magnitude reduction in wake-up receiver power consumption, compared to conventionally used radio frequencies. An ultra-low-power ultrasonic wake-up receiver IC was designed in a 65-nm CMOS process and has a power consumption of only 4.4 uW. For the proof-of-concept prototype demonstrated in this work, the digital back-end circuits were been implemented on a commercial FPGA. An ultrasound data network consisting of three receivers and one transmitter was set up in a lecture hall. For a transmit power of 27 uW, less than 10 % of the wake-up packets, at 1 pkt/s, were missed at each of the three receivers. All the system blocks: receiver IC, ultrasound communication channel and TX-RX transducer pair, were individually characterized in different environments to understand the interaction between the electrical and mechanical domains. Also presented are techniques for increasing the distance ranges of wireless ultrasound and communication schemes for extending the use of ultrasound to environments where line-of-sight communication is not possible
On-demand sensor node wake-up using solar panels and visible light communication
To significantly reduce, or eliminate completely, the energy waste caused by the standby (idle) mode of wireless sensor nodes, we propose a novel on-demand wake-up system, which allows the nodes to be put into sleep mode unless their activation is truly necessary. Although there have been many studies proposing RF-based wake-up radio systems, in this work, we develop the first visible light communication (VLC)-based wake-up system. The developed system can extend the existing VLC systems and can be exploited to derive new application areas such as VLC tags. The system uses an off-the-shell indoor solar panel as receptor device of the wake-up signal as well as for energy harvesting purposes, through which it is able to harvest enough energy for its autonomous work. The design, implementation details and the experimental evaluation results are presented, which include flickering characterization and wake-up range evaluations. The results show that the developed system achieve reasonable wake-up distances for indoor environments, mainly where the use of VLC systems are considered.Peer ReviewedPostprint (published version
Ultra-Low Power Circuit Design for Miniaturized IoT Platform
This thesis examines the ultra-low power circuit techniques for mm-scale Internet of Things (IoT) platforms. The IoT devices are known for their small form factors and limited battery capacity and lifespan. So, ultra-low power consumption of always-on blocks is required for the IoT devices that adopt aggressive duty-cycling for high power efficiency and long lifespan. Several
problems need to be addressed regarding IoT device designs, such as ultra-low power circuit design techniques for sleep mode and energy-efficient and fast data rate transmission for active mode communication. Therefore, this thesis highlights the ultra-low power always-on systems, focusing on energy efficient optical transmission in order to miniaturize the IoT systems.
First, this thesis presents a battery-less sub-nW micro-controller for an always-operating system implemented with a newly proposed logic family.
Second, it proposes an always-operating sub-nW light-to-digital converter to measure instant light intensity and cumulative light exposure, which employs the characteristics of this proposed logic family. Third, it presents an ultra-low
standby power optical wake-up receiver with ambient light canceling using dual-mode operation.
Finally, an energy-efficient low power optical transmitter for an implantable IoT device is suggested. Implications for future research are also provided.PHDElectrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttps://deepblue.lib.umich.edu/bitstream/2027.42/145862/1/imhotep_1.pd
Recommended from our members
Ultra-Low-Power Sensors and Receivers for IoT Applications
The combination of ultra-low power analog front-ends and CMOS-compatible transducers enable new applications, such as environmental monitors, household appliances, health trackers, etc. that are seamlessly integrated into our daily lives. Furthermore, wireless connectivity allows many of these sensors to operate both independently and collectively. These techniques collectively fulfil the recent surge of internet-of-things (IoT) applications that have the potential to fundamentally change daily life for millions of people.In this dissertation, the circuit and system design of wireless receivers and sensors is presented that explores the challenges of implementing long lifespan, high accuracy, and large coverage range IoT sensor networks. The first is a wake-up receiver (WuRX), which continuously monitors the RF environment to wake up a higher-power radio upon detection of a predetermined RF signature. This work both improves sensitivity and reduces power over prior art through a multi-faceted design featuring an impedance transformation network with large passive voltage gain, an active envelope detector with high input impedance to facilitate large passive voltage gain, a low-power precision comparator, and a low-leakage digital baseband correlator.Although pushing the prior WuRX performance boundary by orders of magnitude, the first work shows moderate sensitivity, inferior temperature robustness, and large area with external lumped components. Thus, the second work shows a miniaturized WuRX that is temperature-compensated, yet still consumes only nano-watt power and millimeter area while operating at 9 GHz. To further reduce the area, a global common-mode feedback is utilized across the envelope detector and baseband amplifier that eliminates the need for off-chip ac-coupling components. Multiple temperature-compensation techniques are proposed to maintain constant bandwidth of the signal path and constant clock frequency. Both WuRXs operate at 0.4 V supply, consume near-zero power and achieve ~-70 dBm sensitivity.Lastly, the first reported CMOS 2-in-1 relative humidity and temperature sensor is presented. A unified analog front-end interfaces on-chip transducers and converts the inputs into a frequency vis a high-linearity frequency-locked loop. An incomplete-settling switched-capacitor-based Wheatstone bridge is proposed to sense the inputs in a power-efficient fashion
Ultra-Low Power Optical Interface Circuits for Nearly Invisible Wireless Sensor Nodes.
Technological advances in the semiconductor industry and integrated circuit design have resulted in electronic devices that are smaller and cheaper than ever, and yet they are more pervasive and powerful than what could hardly be imagined several decades ago. Nowadays, small hand-held devices such as smartphones have completely reshaped the way people communicate, share information, and get entertained. According to Bellâs Law, the next generation of computers will be cubic-millimeter-scale in volume with more prevalent presence than any other computing platform available today, opening up myriad of new applications.
In this dissertation, a millimeter-scale wireless sensor node for visual sensing applications is proposed, with emphasis on the optical interface circuits that enable wireless optical communication and visual imaging. Visual monitoring and imaging with CMOS image sensors opens up a variety of new applications for wireless sensor nodes, ranging from surveillance to in vivo molecular imaging. In particular, the ability to detect motion can enable intelligent power management through on-demand duty cycling and reduce the data storage requirement. Optical communication provides an ultra-low power method to wirelessly control or transmit data to the sensor node after encapsulation and deployment.
The proposed wireless sensor node is a nearly-invisible, yet a complete system with imaging, optics, two-way wireless communication, CPU, memory, battery and energy harvesting with solar cells. During its ultra-low power motion detection mode, the overall power consumption is merely 304 nW, allowing energy autonomous continuous operation with 10 klux of background lighting. Such complete features in the unprecedented form factor can revolutionize the role of electronics in our future daily lives, taking the âSmart Dustâ concept from fiction to reality.PhDElectrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/110399/1/coolkgh_1.pd
A Three â tier bio-implantable sensor monitoring and communications platform
One major hindrance to the advent of novel bio-implantable sensor technologies is the need for a reliable power source and data communications platform capable of continuously, remotely, and wirelessly monitoring deeply implantable biomedical devices.
This research proposes the feasibility and potential of combining well established, âhuman-friendly' inductive and ultrasonic technologies to produce a proof-of-concept, generic, multi-tier power transfer and data communication platform suitable for low-power, periodically-activated implantable analogue bio-sensors.
In the inductive sub-system presented, 5 W of power is transferred across a 10 mm gap between a single pair of 39 mm (primary) and 33 mm (secondary) circular printed spiral coils (PSCs). These are printed using an 8000 dpi resolution photoplotter and fabricated on PCB by wet-etching, to the maximum permissible density.
Our ultrasonic sub-system, consisting of a single pair of Pz21 (transmitter) and Pz26 (receiver) piezoelectric PZT ceramic discs driven by low-frequency, radial/planar excitation (-31 mode), without acoustic matching layers, is also reported here for the first time. The discs are characterised by propagation tank test and directly driven by the inductively coupled power to deliver 29 ÎŒW to a receiver (implant) employing a low voltage start-up IC positioned 70 mm deep within a homogeneous liquid phantom. No batteries are used.
The deep implant is thus intermittently powered every 800 ms to charge a capacitor which enables its microcontroller, operating with a 500 kHz clock, to transmit a single nibble (4 bits) of digitized sensed data over a period of ~18 ms from deep within the phantom, to the outside world.
A power transfer efficiency of 83% using our prototype CMOS logic-gate IC driver is reported for the inductively coupled part of the system. Overall prototype system power consumption is 2.3 W with a total power transfer efficiency of 1% achieved across the tiers
Recommended from our members
SkinnySensor: Enabling Battery-Less Wearable Sensors Via Intrabody Power Transfer
Tremendousadvancement inultra-low powerelectronics and radiocommunica tionshas signiïŹcantly contributed towards the fabrication of miniaturized biomedical sensors capable of capturing physiological data and transmitting them wirelessly. However, most of the wearable sensors require a battery for their operation. The battery serves as one of the critical bottlenecks to the development of novel wearable applications, as the limitations oïŹered by batteries are aïŹecting the development of new form-factors and longevity of wearable devices. In this work, we introduce a novel concept, namely Intra-Body Power Transfer (IBPT), to alleviate the limitations and problems associated with batteries, and enable wireless, batteryless wearable devices. The innovation of IBPT is to utilize the human body as the medium to transfer power to passive wearable devices, as opposed to employingon-boardbatteries for each individual device. The proposed platform eliminates the on-board rigid battery for ultra-low power and ultra-miniaturized sensors such that their form-factor can be ïŹexible, ergonomically designed to be placed on small body parts. The platform also eliminates the need for battery maintenance (e.g., recharging or replacement) for multiple wearable devices other than the central power source. The performance of the developed system is tested and evaluated in comparison to traditional Radio Frequency based solutions that can be harmful to human interaction. The system developed is capable of harvesting on average 217”W at 0.43V and provides an average sleep/high impedance mode voltage of 4.5V
Energy-Efficient Circuit Designs for Miniaturized Internet of Things and Wireless Neural Recording
Internet of Things (IoT) have become omnipresent over various territories including healthcare, smart building, agriculture, and environmental and industrial monitoring. Today, IoT are getting miniaturized, but at the same time, they are becoming more intelligent along with the explosive growth of machine learning. Not only do IoT sense and collect data and communicate,
but they also edge-compute and extract useful information within the small form factor. A main challenge of such miniaturized and intelligent IoT is to operate continuously for long lifetime within its low battery capacity. Energy efficiency of circuits and systems is key to addressing this challenge. This dissertation presents two different energy-efficient circuit designs: a 224pW 260ppm/°C gate-leakage-based timer for wireless sensor nodes (WSNs) for the IoT and an energy-efficient all analog machine learning accelerator with 1.2 ”J/inference of energy consumption for the CIFAR-10 and SVHN datasets.
Wireless neural interface is another area that demands miniaturized and energy-efficient circuits and systems for safe long-term monitoring of brain activity. Historically, implantable systems have used wires for data communication and power, increasing risks of tissue damage. Therefore, it has been a long-standing goal to distribute sub-mm-scale true floating and wireless implants throughout the brain and to record single-neuron-level activities. This dissertation presents a 0.19Ă0.17mm2 0.74”W wireless neural recording IC with near-infrared (NIR) power and data telemetry and a 0.19Ă0.28mm2 0.57”W light tolerant wireless neural recording IC.PHDElectrical and Computer EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/169712/1/jongyup_1.pd
- âŠ