215 research outputs found
Time and frequency domain algorithms for speech coding
The promise of digital hardware economies (due to recent advances in
VLSI technology), has focussed much attention on more complex and sophisticated
speech coding algorithms which offer improved quality at relatively
low bit rates.
This thesis describes the results (obtained from computer simulations)
of research into various efficient (time and frequency domain) speech
encoders operating at a transmission bit rate of 16 Kbps.
In the time domain, Adaptive Differential Pulse Code Modulation (ADPCM)
systems employing both forward and backward adaptive prediction were
examined. A number of algorithms were proposed and evaluated, including
several variants of the Stochastic Approximation Predictor (SAP). A
Backward Block Adaptive (BBA) predictor was also developed and found to
outperform the conventional stochastic methods, even though its complexity
in terms of signal processing requirements is lower. A simplified
Adaptive Predictive Coder (APC) employing a single tap pitch predictor
considered next provided a slight improvement in performance over ADPCM,
but with rather greater complexity.
The ultimate test of any speech coding system is the perceptual performance
of the received speech. Recent research has indicated that this
may be enhanced by suitable control of the noise spectrum according to
the theory of auditory masking. Various noise shaping ADPCM
configurations were examined, and it was demonstrated that a proposed
pre-/post-filtering arrangement which exploits advantageously the
predictor-quantizer interaction, leads to the best subjective
performance in both forward and backward prediction systems.
Adaptive quantization is instrumental to the performance of ADPCM systems.
Both the forward adaptive quantizer (AQF) and the backward oneword
memory adaptation (AQJ) were examined. In addition, a novel method
of decreasing quantization noise in ADPCM-AQJ coders, which involves the
application of correction to the decoded speech samples, provided
reduced output noise across the spectrum, with considerable high frequency
noise suppression.
More powerful (and inevitably more complex) frequency domain speech
coders such as the Adaptive Transform Coder (ATC) and the Sub-band Coder
(SBC) offer good quality speech at 16 Kbps. To reduce complexity and
coding delay, whilst retaining the advantage of sub-band coding, a novel
transform based split-band coder (TSBC) was developed and found to compare
closely in performance with the SBC.
To prevent the heavy side information requirement associated with a
large number of bands in split-band coding schemes from impairing coding
accuracy, without forgoing the efficiency provided by adaptive bit
allocation, a method employing AQJs to code the sub-band signals together
with vector quantization of the bit allocation patterns was also
proposed.
Finally, 'pipeline' methods of bit allocation and step size estimation
(using the Fast Fourier Transform (FFT) on the input signal) were examined.
Such methods, although less accurate, are nevertheless useful in
limiting coding delay associated with SRC schemes employing Quadrature
Mirror Filters (QMF)
Improving the robustness of CELP-like speech decoders using late-arrival packets information : application to G.729 standard in VoIP
L'utilisation de la voix sur Internet est une nouvelle tendance dans Ie secteur des télécommunications et de la réseautique. La paquetisation des données et de la voix est réalisée en utilisant Ie protocole Internet (IP). Plusieurs codecs existent pour convertir la voix codée en paquets. La voix codée est paquetisée et transmise sur Internet. À la réception, certains paquets sont soit perdus, endommages ou arrivent en retard. Ceci est cause par des contraintes telles que Ie délai («jitter»), la congestion et les erreurs de réseau. Ces contraintes dégradent la qualité de la voix. Puisque la transmission de la voix est en temps réel, Ie récepteur ne peut pas demander la retransmission de paquets perdus ou endommages car ceci va causer plus de délai. Au lieu de cela, des méthodes de récupération des paquets perdus (« concealment ») s'appliquent soit à l'émetteur soit au récepteur pour remplacer les paquets perdus ou endommages. Ce projet vise à implémenter une méthode innovatrice pour améliorer Ie temps de convergence suite a la perte de paquets au récepteur d'une application de Voix sur IP. La méthode a déjà été intégrée dans un codeur large-bande (AMR-WB) et a significativement amélioré la qualité de la voix en présence de <<jitter » dans Ie temps d'arrivée des trames au décodeur. Dans ce projet, la même méthode sera intégrée dans un codeur a bande étroite (ITU-T G.729) qui est largement utilise dans les applications de voix sur IP. Le codeur ITU-T G.729 défini des standards pour coder et décoder la voix a 8 kb/s en utilisant 1'algorithme CS-CELP (Conjugate Stmcture Algebraic Code-Excited Linear Prediction).Abstract: Voice over Internet applications is the new trend in telecommunications and networking industry today. Packetizing data/voice is done using the Internet protocol (IP). Various codecs exist to convert the raw voice data into packets. The coded and packetized speech is transmitted over the Internet. At the receiving end some packets are either lost, damaged or arrive late. This is due to constraints such as network delay (fitter), network congestion and network errors. These constraints degrade the quality of speech. Since voice transmission is in real-time, the receiver can not request the retransmission of lost or damaged packets as this will cause more delay. Instead, concealment methods are applied either at the transmitter side (coder-based) or at the receiver side (decoder-based) to replace these lost or late-arrival packets. This work attempts to implement a novel method for improving the recovery time of concealed speech The method has already been integrated in a wideband speech coder (AMR-WB) and significantly improved the quality of speech in the presence of jitter in the arrival time of speech frames at the decoder. In this work, the same method will be integrated in a narrowband speech coder (ITU-T G.729) that is widely used in VoIP applications. The ITUT G.729 coder defines the standards for coding and decoding speech at 8 kb/s using Conjugate Structure Algebraic Code-Excited Linear Prediction (CS-CELP) Algorithm
Optimisation techniques for low bit rate speech coding
This thesis extends the background theory of speech and major speech coding schemes used in existing networks to an implementation of GSM full-rate speech compression on a RISC DSP and a multirate application for speech coding. Speech coding is the field concerned with obtaining compact digital representations of speech signals for the purpose of efficient transmission. In this thesis, the background of speech compression, characteristics of speech signals and the DSP algorithms used have been examined. The current speech coding schemes and requirements have been studied. The Global System for Mobile communication (GSM) is a digital mobile radio system which is extensively used throughout Europe, and also in many other parts of the world. The algorithm is standardised by the European Telecommunications Standardisation histitute (ETSI). The full-rate and half-rate speech compression of GSM have been analysed. A real time implementation of the full-rate algorithm has been carried out on a RISC processor GEPARD by Austria Mikro Systeme International (AMS). The GEPARD code has been tested with all of the test sequences provided by ETSI and the results are bit-exact. The transcoding delay is lower than the ETSI requirement. A comparison of the half-rate and full-rate compression algorithms is discussed. Both algorithms offer near toll speech quality comparable or better than analogue cellular networks. The half-rate compression requires more computationally intensive operations and therefore a more powerful processor will be needed due to the complexity of the code. Hence the cost of the implementation of half-rate codec will be considerably higher than full-rate. A description of multirate signal processing and its application on speech (SBC) and speech/audio (MPEG) has been given. An investigation into the possibility of combining multirate filtering and GSM fill-rate speech algorithm. The results showed that multirate signal processing cannot be directly applied GSM full-rate speech compression since this method requires more processing power, causing longer coding delay but did not appreciably improve the bit rate. In order to achieve a lower bit rate, the GSM full-rate mathematical algorithm can be used instead of the standardised ETSI recommendation. Some changes including the number of quantisation bits has to be made before the application of multirate signal processing and a new standard will be required
Voice quality estimation in combined radio-VoIP networks for dispatching systems
The voice quality modelling assessment and planning field is deeply and widely theoretically and practically mastered for common voice communication systems, especially for the public fixed and mobile telephone networks including Next Generation Networks (NGN - internet protocol based networks). This article seeks to contribute voice quality modelling assessment and planning for dispatching communication systems based on Internet Protocol (IP) and private radio networks. The network plan, correction in E-model calculation and default values for the model are presented and discussed
Recommended from our members
Speech coding
Speech is the predominant means of communication between human beings and since the invention of the telephone by Alexander Graham Bell in 1876, speech services have remained to be the core service in almost all telecommunication systems. Original analog methods of telephony had the disadvantage of speech signal getting corrupted by noise, cross-talk and distortion Long haul transmissions which use repeaters to compensate for the loss in signal strength on transmission links also increase the associated noise and distortion. On the other hand digital transmission is relatively immune to noise, cross-talk and distortion primarily because of the capability to faithfully regenerate digital signal at each repeater purely based on a binary decision. Hence end-to-end performance of the digital link essentially becomes independent of the length and operating frequency bands of the link Hence from a transmission point of view digital transmission has been the preferred approach due to its higher immunity to noise. The need to carry digital speech became extremely important from a service provision point of view as well. Modem requirements have introduced the need for robust, flexible and secure services that can carry a multitude of signal types (such as voice, data and video) without a fundamental change in infrastructure. Such a requirement could not have been easily met without the advent of digital transmission systems, thereby requiring speech to be coded digitally. The term Speech Coding is often referred to techniques that represent or code speech signals either directly as a waveform or as a set of parameters by analyzing the speech signal. In either case, the codes are transmitted to the distant end where speech is reconstructed or synthesized using the received set of codes. A more generic term that is applicable to these techniques that is often interchangeably used with speech coding is the term voice coding. This term is more generic in the sense that the coding techniques are equally applicable to any voice signal whether or not it carries any intelligible information, as the term speech implies. Other terms that are commonly used are speech compression and voice compression since the fundamental idea behind speech coding is to reduce (compress) the transmission rate (or equivalently the bandwidth) And/or reduce storage requirements In this document the terms speech and voice shall be used interchangeably
Comparison of CELP speech coder with a wavelet method
This thesis compares the speech quality of Code Excited Linear Predictor (CELP, Federal Standard 1016) speech coder with a new wavelet method to compress speech. The performances of both are compared by performing subjective listening tests. The test signals used are clean signals (i.e. with no background noise), speech signals with room noise and speech signals with artificial noise added. Results indicate that for clean signals and signals with predominantly voiced components the CELP standard performs better than the wavelet method but for signals with room noise the wavelet method performs much better than the CELP. For signals with artificial noise added, the results are mixed depending on the level of artificial noise added with CELP performing better for low level noise added signals and the wavelet method performing better for higher noise levels
- …