Geometrically-constrained, parasitic-aware synthesis of analog ICs

In order to speed up the design process of analog ICs, iterations between different design stages should be avoided as much as possible. More specifically, spins between electrical and physical synthesis should be reduced for this is a very time-consuming task: if circuit performance including layout-induced degradations proves unacceptable, a re-design cycle must be entered, and electrical, physical, or both synthesis processes, would have to be repeated. It is also worth noting that if geometric optimization (e.g., area minimization) is undertaken after electrical synthesis, it may add up as another source of unexpected degradation of the circuit performance due to the impact of the geometric variables (e.g., transistor folds) on the device and the routing parasitic values. This awkward scenario is caused by the complete separation of said electrical and physical synthesis, a design practice commonly followed so far. Parasitic-aware synthesis, consisting in including parasitic estimates to the circuit netlist directly during electrical synthesis, has been proposed as solution. While most of the reported contributions either tackle parasitic-aware synthesis without paying special attention to geometric optimization or approach both issues only partially, this paper addresses the problem in a unified way. In what has been called layout-aware electrical synthesis, a simulation-based optimization algorithm explores the design space with geometric variables constrained to meet certain user-defined goals, which provides reliable estimates of layout-induced parasitics at each iteration, and, thereby, accurate evaluation of the circuit ultimate performance. This technique, demonstrated here through several design examples, requires knowing layout details beforehand; to facilitate this, procedural layout generation is used as physical synthesis approach due to its rapidness and ability to capture analog layout know-how.Ministerio de Educación y Ciencia TEC2004-0175

On the suitability and development of layout templates for analog layout reuse and layout-aware synthesis

Accelerating the synthesis of increasingly complex analog integrated circuits is key to bridge the widening gap between what we can integrate and what we can design while meeting ever-tightening time-to-market constraints. It is a well-known fact in the semiconductor industry that such goal can only be attained by means of adequate CAD methodologies, techniques, and accompanying tools. This is particularly important in analog physical synthesis (a.k.a. layout generation), where large sensitivities of the circuit performances to the many subtle details of layout implementation (device matching, loading and coupling effects, reliability, and area features are of utmost importance to analog designers), render complete automation a truly challenging task. To approach the problem, two directions have been traditionally considered, knowledge-based and optimization-based, both with their own pros and cons. Besides, recently reported solutions oriented to speed up the overall design flow by means of reuse-based practices or by cutting off time-consuming, error-prone spins between electrical and layout synthesis (a technique known as layout-aware synthesis), rely on a outstandingly rapid yet efficient layout generation method. This paper analyses the suitability of procedural layout generation based on templates (a knowledge-based approach) by examining the requirements that both layout reuse and layout-aware solutions impose, and how layout templates face them. The ability to capture the know-how of experienced layout designers and the turnaround times for layout instancing are considered main comparative aspects in relation to other layout generation approaches. A discussion on the benefit-cost trade-off of using layout templates is also included. In addition to this analysis, the paper delves deeper into systematic techniques to develop fully reusable layout templates for analog circuits, either for a change of the circuit sizing (i.e., layout retargeting) or a change of the fabrication process (i.e., layout migration). Several examples implemented with the Cadence's Virtuoso tool suite are provided as demonstration of the paper's contributions.Ministerio de Educación y Ciencia TEC2004-0175

Tag-Cloud Drawing: Algorithms for Cloud Visualization

Tag clouds provide an aggregate of tag-usage statistics. They are typically sent as in-line HTML to browsers. However, display mechanisms suited for ordinary text are not ideal for tags, because font sizes may vary widely on a line. As well, the typical layout does not account for relationships that may be known between tags. This paper presents models and algorithms to improve the display of tag clouds that consist of in-line HTML, as well as algorithms that use nested tables to achieve a more general 2-dimensional layout in which tag relationships are considered. The first algorithms leverage prior work in typesetting and rectangle packing, whereas the second group of algorithms leverage prior work in Electronic Design Automation. Experiments show our algorithms can be efficiently implemented and perform well.Comment: To appear in proceedings of Tagging and Metadata for Social Information Organization (WWW 2007

Silicon compilation

Silicon compilation is a term used for many different purposes. In this paper we define silicon compilation as a mapping from some higher level description into layout. We define the basic issues in structural and behavioral silicon compilation and some possible solutions to those issues. Finally, we define the concept of an intelligent silicon compiler in which the compiler evaluates the quality of the generated design and attempts to improve it if it is not satisfactory

Photonics design tool for advanced CMOS nodes

Recently, the authors have demonstrated large-scale integrated systems with several million transistors and hundreds of photonic elements. Yielding such large-scale integrated systems requires a design-for-manufacture rigour that is embodied in the 10 000 to 50 000 design rules that these designs must comply within advanced complementary metal-oxide semiconductor manufacturing. Here, the authors present a photonic design automation tool which allows automatic generation of layouts without design-rule violations. This tool is written in SKILL, the native language of the mainstream electric design automation software, Cadence. This allows seamless integration of photonic and electronic design in a single environment. The tool leverages intuitive photonic layer definitions, allowing the designer to focus on the physical properties rather than on technology-dependent details. For the first time the authors present an algorithm for removal of design-rule violations from photonic layouts based on Manhattan discretisation, Boolean and sizing operations. This algorithm is not limited to the implementation in SKILL, and can in principle be implemented in any scripting language. Connectivity is achieved with software-defined waveguide ports and low-level procedures that enable auto-routing of waveguide connections.Comment: 5 pages, 10 figure

Survey of partitioning techniques in silicon compilation

In the silicon compilation design process, partitioning is usually the first problem to be investigated because partitioning algorithms form the backbone of many algorithms including: system synthesis, processor synthesis, floorplanning, and placement. In this survey, several partitioning techniques will be examined. In addition, this paper will review the partitioning algorithms used by synthesis systems at different design levels

Routing for analog chip designs at NXP Semiconductors

During the study week 2011 we worked on the question of how to automate certain aspects of the design of analog chips. Here we focused on the task of connecting different blocks with electrical wiring, which is particularly tedious to do by hand. For digital chips there is a wealth of research available for this, as in this situation the amount of blocks makes it hopeless to do the design by hand. Hence, we set our task to finding solutions that are based on the previous research, as well as being tailored to the specific setting given by NXP. This resulted in an heuristic approach, which we presented at the end of the week in the form of a protoype tool. In this report we give a detailed account of the ideas we used, and describe possibilities to extend the approach

A New Optimization Cost Model for VLSI Standard Cell Placement

In this paper, we propose a new optimization cost model for VLSI placement. It distinguishes itself from the traditional wire-length cost model by having direct impact on the quality of the detailed routing phase. We also extend the well-known simulated annealing standard cell placement algorithm by applying our new cost model. Experimental results show that we got 13% layout area reduction compared to traditional wire length model, 11% reduction to commercial tool.published_or_final_versio