On Fault Tolerance Methods for Networks-on-Chip

Technology scaling has proceeded into dimensions in which the reliability of manufactured devices is becoming endangered. The reliability decrease is a consequence of physical limitations, relative increase of variations, and decreasing noise margins, among others. A promising solution for bringing the reliability of circuits back to a desired level is the use of design methods which introduce tolerance against possible faults in an integrated circuit. This thesis studies and presents fault tolerance methods for network-onchip (NoC) which is a design paradigm targeted for very large systems-onchip. In a NoC resources, such as processors and memories, are connected to a communication network; comparable to the Internet. Fault tolerance in such a system can be achieved at many abstraction levels. The thesis studies the origin of faults in modern technologies and explains the classification to transient, intermittent and permanent faults. A survey of fault tolerance methods is presented to demonstrate the diversity of available methods. Networks-on-chip are approached by exploring their main design choices: the selection of a topology, routing protocol, and flow control method. Fault tolerance methods for NoCs are studied at different layers of the OSI reference model. The data link layer provides a reliable communication link over a physical channel. Error control coding is an efficient fault tolerance method especially against transient faults at this abstraction level. Error control coding methods suitable for on-chip communication are studied and their implementations presented. Error control coding loses its effectiveness in the presence of intermittent and permanent faults. Therefore, other solutions against them are presented. The introduction of spare wires and split transmissions are shown to provide good tolerance against intermittent and permanent errors and their combination to error control coding is illustrated. At the network layer positioned above the data link layer, fault tolerance can be achieved with the design of fault tolerant network topologies and routing algorithms. Both of these approaches are presented in the thesis together with realizations in the both categories. The thesis concludes that an optimal fault tolerance solution contains carefully co-designed elements from different abstraction levelsSiirretty Doriast

9th IEEE International On-Line Testing Symposium (IOLTS 2003), Kos Island, Greece, July 7-9, 2003

ISBN: 0-7695-1968-7Starting from this year the IEEE International On-Line Testing Workshop is transformed to Symposium, to reflect the continues growing in size and improvement in quality of the event, and the increased importance of on-line testing in modern electronics systems. In particularly, the huge complexity of electronic systems has seen reliability needs growing up in various application domains as well as pressure for low cost products. There is a corresponding increasing demand for cost-effective on-line testing techniques. These needs have increased dramatically with the introduction of very deep submicron and nanometer technologies. These technologies impact adversely noise margins and make mandatory integrating on-line test in modern ICs. The Symposium is also emphasizing on on-line testing in the continuous operation of large applications such as wired, cellular and satellite telecommunication, as well as in cryptographic chips

MOCAST 2021

The 10th International Conference on Modern Circuit and System Technologies on Electronics and Communications (MOCAST 2021) will take place in Thessaloniki, Greece, from July 5th to July 7th, 2021. The MOCAST technical program includes all aspects of circuit and system technologies, from modeling to design, verification, implementation, and application. This Special Issue presents extended versions of top-ranking papers in the conference. The topics of MOCAST include:Analog/RF and mixed signal circuits;Digital circuits and systems design;Nonlinear circuits and systems;Device and circuit modeling;High-performance embedded systems;Systems and applications;Sensors and systems;Machine learning and AI applications;Communication; Network systems;Power management;Imagers, MEMS, medical, and displays;Radiation front ends (nuclear and space application);Education in circuits, systems, and communications

Reliability for exascale computing : system modelling and error mitigation for task-parallel HPC applications

As high performance computing (HPC) systems continue to grow, their fault rate increases. Applications running on these systems have to deal with rates on the order of hours or days. Furthermore, some studies for future Exascale systems predict the rates to be on the order of minutes. As a result, efficient fault tolerance solutions are needed to be able to tolerate frequent failures. A fault tolerance solution for future HPC and Exascale systems must be low-cost, efficient and highly scalable. It should have low overhead in fault-free execution and provide fast restart because long-running applications are expected to experience many faults during the execution. Meanwhile task-based dataflow parallel programming models (PM) are becoming a popular paradigm in HPC applications at large scale. For instance, we see the adaptation of task-based dataflow parallelism in OpenMP 4.0, OmpSs PM, Argobots and Intel Threading Building Blocks. In this thesis we propose fault-tolerance solutions for task-parallel dataflow HPC applications. Specifically, first we design and implement a checkpoint/restart and message-logging framework to recover from errors. We then develop performance models to investigate the benefits of our task-level frameworks when integrated with system-wide checkpointing. Moreover, we design and implement selective task replication mechanisms to detect and recover from silent data corruptions in task-parallel dataflow HPC applications. Finally, we introduce a runtime-based coding scheme to detect and recover from memory errors in these applications. Considering the span of all of our schemes, we see that they provide a fairly high failure coverage where both computation and memory is protected against errors.A medida que los Sistemas de Cómputo de Alto rendimiento (HPC por sus siglas en inglés) siguen creciendo, también las tasas de fallos aumentan. Las aplicaciones que se ejecutan en estos sistemas tienen una tasa de fallos que pueden estar en el orden de horas o días. Además, algunos estudios predicen que los fallos estarán en el orden de minutos en los Sistemas Exascale. Por lo tanto, son necesarias soluciones eficientes para la tolerancia a fallos que puedan tolerar fallos frecuentes. Las soluciones para tolerancia a fallos en los Sistemas futuros de HPC y Exascale tienen que ser de bajo costo, eficientes y altamente escalable. El sobrecosto en la ejecución sin fallos debe ser bajo y también se debe proporcionar reinicio rápido, ya que se espera que las aplicaciones de larga duración experimenten muchos fallos durante la ejecución. Por otra parte, los modelos de programación paralelas basados en tareas ordenadas de acuerdo a sus dependencias de datos, se están convirtiendo en un paradigma popular en aplicaciones HPC a gran escala. Por ejemplo, los siguientes modelos de programación paralela incluyen este tipo de modelo de programación OpenMP 4.0, OmpSs, Argobots e Intel Threading Building Blocks. En esta tesis proponemos soluciones de tolerancia a fallos para aplicaciones de HPC programadas en un modelo de programación paralelo basado tareas. Específicamente, en primer lugar, diseñamos e implementamos mecanismos “checkpoint/restart” y “message-logging” para recuperarse de los errores. Para investigar los beneficios de nuestras herramientas a nivel de tarea cuando se integra con los “system-wide checkpointing” se han desarrollado modelos de rendimiento. Por otra parte, diseñamos e implementamos mecanismos de replicación selectiva de tareas que permiten detectar y recuperarse de daños de datos silenciosos en aplicaciones programadas siguiendo el modelo de programación paralela basadas en tareas. Por último, se introduce un esquema de codificación que funciona en tiempo de ejecución para detectar y recuperarse de los errores de la memoria en estas aplicaciones. Todos los esquemas propuestos, en conjunto, proporcionan una cobertura bastante alta a los fallos tanto si estos se producen el cálculo o en la memoria.Postprint (published version