DC to DC USB-C Charger

The DC House USB-C Charger will convert the 48V input from the DC house, found on the Cal Poly campus, to 3 USB-C outputs: 5V, 12V, and 24 volts. The converter will deliver a total of 185 Watts out across all 3 outputs, with an efficiency greater than 82% at full load. The USB-C ports will be used to connect to compatible phones, laptops or any other device for charging/powering purposes. The goal of this project is to develop the most efficient and safe converter to deliver power to multiple outputs using USB-C, for items as small as a cell phone to the size of a mini fridge. Currently, the DC house does not contain this USB-C feature. USB-C is the connector type that technological companies are using more and more within their new products. With this said, it is necessary to design and implement this charging capability to the DC house. Once implemented, this project will assist in having the house up to date with the most current technological advancements

Design and Control of Power Converters 2020

In this book, nine papers focusing on different fields of power electronics are gathered, all of which are in line with the present trends in research and industry. Given the generality of the Special Issue, the covered topics range from electrothermal models and losses models in semiconductors and magnetics to converters used in high-power applications. In this last case, the papers address specific problems such as the distortion due to zero-current detection or fault investigation using the fast Fourier transform, all being focused on analyzing the topologies of high-power high-density applications, such as the dual active bridge or the H-bridge multilevel inverter. All the papers provide enough insight in the analyzed issues to be used as the starting point of any research. Experimental or simulation results are presented to validate and help with the understanding of the proposed ideas. To summarize, this book will help the reader to solve specific problems in industrial equipment or to increase their knowledge in specific fields

Multi-Frequency Modulation and Control for DC/AC and AC/DC Resonant Converters

Harmonic content is inherent in switched-mode power supplies. Since the undesired harmonics interfere with the operation of other sensitive electronics, the reduction of harmonic content is essential for power electronics design. Conventional approaches to attenuate the harmonic content include passive/active filter and wave-shaping in modulation. However, those approaches are not suitable for resonant converters due to bulky passive volumes and excessive switching losses. This dissertation focuses on eliminating the undesired harmonics from generation by intelligently manipulating the spectrum of switching waveforms, considering practical needs for functionality.To generate multiple ac outputs while eliminating the low-order harmonics from a single inverter, a multi-frequency programmed pulse width modulation is investigated. The proposed modulation schemes enable multi-frequency generation and independent output regulation. In this method, the fundamental and certain harmonics are independently controlled for each of the outputs, allowing individual power regulations. Also, undesired harmonics in between output frequencies are easily eliminated from generation, which prevents potential hazards caused by the harmonic content and bulky filters. Finally, the proposed modulation schemes are applicable to a variety of DC/AC topologies.Two applications of dc/ac resonant inverters, i.e. an electrosurgical generator and a dual-mode WPT transmitter, are demonstrated using the proposed MFPWM schemes. From the experimental results of two hardware prototypes, the MFPWM alleviates the challenges of designing a complicated passive filter for the low-order harmonics. In addition, the MFPWM facilitates combines functionalities using less hardware compared to the state-of-the-art. The prototypes demonstrate a comparable efficiency while achieving multiple ac outputs using a single inverter.To overcome the low-efficiency, low power-density problems in conventional wireless fast charging, a multi-level switched-capacitor ac/dc rectifier is investigated. This new WPT receiver takes advantage of a high power-density switched-capacitor circuit, the low harmonic content of the multilevel MFPWMs, and output regulation ability to improve the system efficiency. A detailed topology evaluation regarding the regulation scheme, system efficiency, current THD and volume estimation is demonstrated, and experimental results from a 20 W prototype prove that the multi-level switched-capacitor rectifier is an excellent candidate for high-efficiency, high power density design of wireless fast charging receiver

Design and Control of Power Converters 2019

In this book, 20 papers focused on different fields of power electronics are gathered. Approximately half of the papers are focused on different control issues and techniques, ranging from the computer-aided design of digital compensators to more specific approaches such as fuzzy or sliding control techniques. The rest of the papers are focused on the design of novel topologies. The fields in which these controls and topologies are applied are varied: MMCs, photovoltaic systems, supercapacitors and traction systems, LEDs, wireless power transfer, etc

Development of controllers using FPGA for fuel cells in standalone and utility applications

In the recent years, increase in consumption of energy, instability of crude oil price and global climate change has forced researchers to focus more on renewable energy sources.Though there are different renewable energy sources available (such as photovoltaic and wind energy), they have some major limitations. The potential techniques which can provide renewable energy are fuel cell technology which is better than other renewable sources of energy. Solid oxide fuel cell (SOFC) is more efficient, environmental friendly renewable energy source. This dissertation focuses on load/grid connected fuel cell power system (FCPS) which can be used as a backup power source for household and commercial units. This backup power source will be efficient and will provide energy at an affordable per unit cost. Load/grid connected fuel cell power system mainly comprises of a fuel cell module, DCDC converter and DC-AC inverter. This thesis primarily focuses on solid oxide fuel cell (SOFC) modelling, digital control of DC-DC converter and DC-AC inverter. Extensive simulation results are validated by experimental results. Dynamic mathematical model of SOFC is developed to find out output voltage, efficiency, over potential loss and power density of fuel cell stack. The output voltage of fuel cell is fed to a DC-DC converter to step up the output voltage. Conventional Proportional-Integral (PI) controller and FPGA based PI controller is implemented and experimentally validated. The output voltage of DC-DC converter is fed to DC-AC inverter. Different pulse width modulation-voltage source inverter (PWM-VSI) control strategy (such as Hysteresis Current Controller (HCC), Adaptive-HCC, Fuzzy-HCC, Adaptive Fuzzy-HCC, Triangular Carrier Current Controller (TCCC) and Triangular Periodical Current Controller (TPCC)) for DC-AC inverter are investigated and validated through extensive simulations using MATLAB/SIMULINK. This work also focuses on number of fuel cells required for application in real time and remedy strategies when one or few fuel cells are malfunctioning. When the required numbers of fuel cells are not available, DC-DC converter is used to step up the output voltage of fuel cell. When there is a malfunction in fuel cell or shortage of hydrogen then a battery is used to provide backup power

Current fed multilevel converters for high current power applications

Phd ThesisThe majority of the worldwide installed power inverters today are voltage source inverters followed by current source inverters where the concluding decision lies with the performance of the applications besides the usual economic reasons. Recent active development in the current source inverter areas has seen the emerging of various generalized multilevel current source inverter topologies analogous to the existing multilevel voltage source inverter families. To date, the multilevel current source inverter families have been classified principally by the physical appearance of their basic structures and also by the number of current sources employed. The existing multilevel current source inverter topologies are unpopular for present applications due to reasons such as big sizes, high control complexity and low reliability; which circumstances are often associated to massive component counts and multiple requirements of current sources. Therefore, this research has been focused on the single-phase single-source generalized multilevel current source inverter for this apparent advantage; where this thesis proposed a novel generalized multilevel current-source inverter topology with the lowest component utilization while employing just a single current source. In addition, the proposed topology can conveniently achieved dc current balance with a simple low frequency switching strategy for the five- and nine-level current outputs. From comparison analysis, the proposed topology has significantly less number of components employed compared to the nearest topology, which implies low implementation cost. The experimental results verify the characteristics and performances of the proposed topology acquired by computer simulations.ministry of education, Malaysia and also to my employer the University Malaysia Pahang (UMP) for the financial suppor

Industrial and Technological Applications of Power Electronics Systems

The Special Issue "Industrial and Technological Applications of Power Electronics Systems" focuses on: - new strategies of control for electric machines, including sensorless control and fault diagnosis; - existing and emerging industrial applications of GaN and SiC-based converters; - modern methods for electromagnetic compatibility. The book covers topics such as control systems, fault diagnosis, converters, inverters, and electromagnetic interference in power electronics systems. The Special Issue includes 19 scientific papers by industry experts and worldwide professors in the area of electrical engineering