Waveform Design for 5G and Beyond

5G is envisioned to improve major key performance indicators (KPIs), such as peak data rate, spectral efficiency, power consumption, complexity, connection density, latency, and mobility. This chapter aims to provide a complete picture of the ongoing 5G waveform discussions and overviews the major candidates. It provides a brief description of the waveform and reveals the 5G use cases and waveform design requirements. The chapter presents the main features of cyclic prefix-orthogonal frequency-division multiplexing (CP-OFDM) that is deployed in 4G LTE systems. CP-OFDM is the baseline of the 5G waveform discussions since the performance of a new waveform is usually compared with it. The chapter examines the essential characteristics of the major waveform candidates along with the related advantages and disadvantages. It summarizes and compares the key features of different waveforms.Comment: 22 pages, 21 figures, 2 tables; accepted version (The URL for the final version: https://onlinelibrary.wiley.com/doi/abs/10.1002/9781119333142.ch2

5G and beyond networks

This chapter investigates the Network Layer aspects that will characterize the merger of the cellular paradigm and the IoT architectures, in the context of the evolution towards 5G-and-beyond, including some promising emerging services as Unmanned Aerial Vehicles or Base Stations, and V2X communications

On the 5G and beyond

UIDB/50008/2020This article provides an overview of the fifth generation of cellular communications (5G) and beyond. It presents the transmission techniques of current 5G communications and those expected of future developments, namely a brief study of non-orthogonal multiple access (NOMA) using the single carrier with frequency domain equalization (SC-FDE) block transmission technique, evidencing its added value in terms of spectral efficiency. An introduction to the sixth generation of cellular communications (6G) is also provided. The insertion of 5G and 6G within the Fourth Industrial Revolution framework (also known as Industry 4.0) is also dealt with. Consisting of a change in paradigm, when compared to previous generations, 5G supports a myriad of new services based on the Internet of things (IoT) and on vehicle-to-vehicle (V2V) communications, supporting technologies such as autonomous driving, smart cities, and remote surgery. The new services provided by 5G are supported by new techniques, such as millimeter waves (mm-wave), in addition to traditional microwave communication, and by massive multiple-input multiple-output (m-MIMO) technology. These techniques were not employed in the fourth generation of cellular communications (4G). While 5G plays an important role in the initial implementation of the Fourth Industrial Revolution, 6G will address a number of new services such as virtual reality (VR), augmented reality (AR), holographic services, the advanced Internet of things (IoT), AI-infused applications, wireless brain–computer interaction (BCI), and mobility at higher speeds. The current research on systems beyond 5G indicates that these applications shall be supported by new MIMO techniques and make use of terahertz (THz) bands.publishersversionpublishe

Filtered OFDM systems, algorithms and performance analysis for 5G and beyond

Filtered orthogonal frequency division multiplexing (F-OFDM) system is a promising waveform for 5G and beyond to enable multi-service system and spectrum efficient network slicing. However, the performance for F-OFDM systems has not been systematically analyzed in literature. In this paper, we first establish a mathematical model for F-OFDM system and derive the conditions to achieve the interference-free one-tap channel equalization. In the practical cases (e.g., insufficient guard interval, asynchronous transmission, etc.), the analytical expressions for inter-symbol-interference (ISI), inter-carrier-interference (ICI) and adjacent-carrier-interference (ACI) are derived, where the last term is considered as one of the key factors for asynchronous transmissions. Based on the framework, an optimal power compensation matrix is derived to make all of the subcarriers having the same ergodic performance. Another key contribution of the paper is that we propose a multi-rate F-OFDM system to enable low complexity low cost communication scenarios such as narrow band Internet of Things (IoT), at the cost of generating inter-subband-interference (ISubBI). Low computational complexity algorithms are proposed to cancel the ISubBI. The result shows that the derived analytical expressions match the simulation results, and the proposed ISubBI cancelation algorithms can significantly save the original F-OFDM complexity (up to 100 times) without significant performance los

Antenna Design for 5G and Beyond

With the rapid evolution of the wireless communications, fifth-generation (5G) communication has received much attention from both academia and industry, with many reported efforts and research outputs and significant improvements in different aspects, such as data rate speed and resolution, mobility, latency, etc. In some countries, the commercialization of 5G communication has already started as well as initial research of beyond technologies such as 6G.MIMO technology with multiple antennas is a promising technology to obtain the requirements of 5G/6G communications. It can significantly enhance the system capacity and resist multipath fading, and has become a hot spot in the field of wireless communications. This technology is a key component and probably the most established to truly reach the promised transfer data rates of future communication systems. In MIMO systems, multiple antennas are deployed at both the transmitter and receiver sides. The greater number of antennas can make the system more resistant to intentional jamming and interference. Massive MIMO with an especially high number of antennas can reduce energy consumption by targeting signals to individual users utilizing beamforming.Apart from sub-6 GHz frequency bands, 5G/6G devices are also expected to cover millimeter-wave (mmWave) and terahertz (THz) spectra. However, moving to higher bands will bring new challenges and will certainly require careful consideration of the antenna design for smart devices. Compact antennas arranged as conformal, planar, and linear arrays can be employed at different portions of base stations and user equipment to form phased arrays with high gain and directional radiation beams. The objective of this Special Issue is to cover all aspects of antenna designs used in existing or future wireless communication systems. The aim is to highlight recent advances, current trends, and possible future developments of 5G/6G antennas

Digital twin for 5G and beyond

Although many countries have started the initial phase of rolling out 5G, it is still in its infancy with researchers from both academia and industry facing the challenges of developing to its full potential. With the support of Artificial Intelligence, development of digital transformation through the notion of a ‘Digital Twin’ has been taking off in many industries such as smart manufacturing, oil & gas, constructions, bio-engineering, and automotive. However, Digital Twins remain relatively new for 5G networks, despite the obvious potential in helping develop and deploy the complex 5G environment. This paper looks into these topics and discusses how Digital Twin could be a powerful tool to fulfil the potentials of 5G networks and beyond

Terahertz communications for 5G and beyond

A brief discussion about the exclusive properties and applications of terahertz technology is provided in this chapter. The frequency spectrum terahertz (THz) is also discussed. The applications of terahertz in the field of sensors and terahertz for communications are covered. State-of-the-art literature starting from the early to the latest research conducted is provided and analyzed in terms of the performance of terahertz systems. Terahertz, known as Tera waves or T-waves rather than submillimeter wave, has approximately a fraction of a wavelength less than 30 μm. T-wave is heavily used in sensing and imaging applications, and has no ionization hazards and is an excellent candidate frequency band to defeat the multipaths interference problems for pulse communications. The lower quantum energy of T-waves identifies its potential applications toward near-field imaging, telecommunications, spectroscopy, and sensing, including medical diagnoses and security screening. Identification of DNA signatures including complex real-time molecular dynamics through dielectric resonance is a good example of terahertz spectroscopy instruments nowadays. This concluding chapter will not only address the practical applications of terahertz communications, but also identify the research challenges that lie ahead in terms of terahertz antenna desig