66 research outputs found
Minimum-cost multicast over coded packet networks
We consider the problem of establishing minimum-cost multicast connections over coded packet networks, i.e., packet networks where the contents of outgoing packets are arbitrary, causal functions of the contents of received packets. We consider both wireline and wireless packet networks as well as both static multicast (where membership of the multicast group remains constant for the duration of the connection) and dynamic multicast (where membership of the multicast group changes in time, with nodes joining and leaving the group). For static multicast, we reduce the problem to a polynomial-time solvable optimization problem, and we present decentralized algorithms for solving it. These algorithms, when coupled with existing decentralized schemes for constructing network codes, yield a fully decentralized approach for achieving minimum-cost multicast. By contrast, establishing minimum-cost static multicast connections over routed packet networks is a very difficult problem even using centralized computation, except in the special cases of unicast and broadcast connections. For dynamic multicast, we reduce the problem to a dynamic programming problem and apply the theory of dynamic programming to suggest how it may be solved
Random Linear Network Coding For Time Division Duplexing: When To Stop Talking And Start Listening
A new random linear network coding scheme for reliable communications for
time division duplexing channels is proposed. The setup assumes a packet
erasure channel and that nodes cannot transmit and receive information
simultaneously. The sender transmits coded data packets back-to-back before
stopping to wait for the receiver to acknowledge (ACK) the number of degrees of
freedom, if any, that are required to decode correctly the information. We
provide an analysis of this problem to show that there is an optimal number of
coded data packets, in terms of mean completion time, to be sent before
stopping to listen. This number depends on the latency, probabilities of packet
erasure and ACK erasure, and the number of degrees of freedom that the receiver
requires to decode the data. This scheme is optimal in terms of the mean time
to complete the transmission of a fixed number of data packets. We show that
its performance is very close to that of a full duplex system, while
transmitting a different number of coded packets can cause large degradation in
performance, especially if latency is high. Also, we study the throughput
performance of our scheme and compare it to existing half-duplex Go-back-N and
Selective Repeat ARQ schemes. Numerical results, obtained for different
latencies, show that our scheme has similar performance to the Selective Repeat
in most cases and considerable performance gain when latency and packet error
probability is high.Comment: 9 pages, 9 figures, Submitted to INFOCOM'0
Broadcasting in Noisy Radio Networks
The widely-studied radio network model [Chlamtac and Kutten, 1985] is a
graph-based description that captures the inherent impact of collisions in
wireless communication. In this model, the strong assumption is made that node
receives a message from a neighbor if and only if exactly one of its
neighbors broadcasts.
We relax this assumption by introducing a new noisy radio network model in
which random faults occur at senders or receivers. Specifically, for a constant
noise parameter , either every sender has probability of
transmitting noise or every receiver of a single transmission in its
neighborhood has probability of receiving noise.
We first study single-message broadcast algorithms in noisy radio networks
and show that the Decay algorithm [Bar-Yehuda et al., 1992] remains robust in
the noisy model while the diameter-linear algorithm of Gasieniec et al., 2007
does not. We give a modified version of the algorithm of Gasieniec et al., 2007
that is robust to sender and receiver faults, and extend both this modified
algorithm and the Decay algorithm to robust multi-message broadcast algorithms.
We next investigate the extent to which (network) coding improves throughput
in noisy radio networks. We address the previously perplexing result of Alon et
al. 2014 that worst case coding throughput is no better than worst case routing
throughput up to constants: we show that the worst case throughput performance
of coding is, in fact, superior to that of routing -- by a
gap -- provided receiver faults are introduced. However, we show that any
coding or routing scheme for the noiseless setting can be transformed to be
robust to sender faults with only a constant throughput overhead. These
transformations imply that the results of Alon et al., 2014 carry over to noisy
radio networks with sender faults.Comment: Principles of Distributed Computing 201
Performance Modelling and Optimisation of Multi-hop Networks
A major challenge in the design of large-scale networks is to predict and optimise the
total time and energy consumption required to deliver a packet from a source node to a
destination node. Examples of such complex networks include wireless ad hoc and sensor
networks which need to deal with the effects of node mobility, routing inaccuracies, higher
packet loss rates, limited or time-varying effective bandwidth, energy constraints, and the
computational limitations of the nodes. They also include more reliable communication
environments, such as wired networks, that are susceptible to random failures, security
threats and malicious behaviours which compromise their quality of service (QoS) guarantees.
In such networks, packets traverse a number of hops that cannot be determined
in advance and encounter non-homogeneous network conditions that have been largely
ignored in the literature. This thesis examines analytical properties of packet travel in
large networks and investigates the implications of some packet coding techniques on both
QoS and resource utilisation.
Specifically, we use a mixed jump and diffusion model to represent packet traversal
through large networks. The model accounts for network non-homogeneity regarding
routing and the loss rate that a packet experiences as it passes successive segments of a
source to destination route. A mixed analytical-numerical method is developed to compute
the average packet travel time and the energy it consumes. The model is able to capture
the effects of increased loss rate in areas remote from the source and destination, variable
rate of advancement towards destination over the route, as well as of defending against
malicious packets within a certain distance from the destination. We then consider sending
multiple coded packets that follow independent paths to the destination node so as to
mitigate the effects of losses and routing inaccuracies. We study a homogeneous medium
and obtain the time-dependent properties of the packet’s travel process, allowing us to
compare the merits and limitations of coding, both in terms of delivery times and energy
efficiency. Finally, we propose models that can assist in the analysis and optimisation
of the performance of inter-flow network coding (NC). We analyse two queueing models
for a router that carries out NC, in addition to its standard packet routing function. The
approach is extended to the study of multiple hops, which leads to an optimisation problem
that characterises the optimal time that packets should be held back in a router, waiting
for coding opportunities to arise, so that the total packet end-to-end delay is minimised
Recommended from our members
A survey on Bluetooth multi-hop networks
Bluetooth was firstly announced in 1998. Originally designed as cable replacement connecting devices in a point-to-point fashion its high penetration arouses interest in its ad-hoc networking potential. This ad-hoc networking potential of Bluetooth is advertised for years - but until recently no actual products were available and less than a handful of real Bluetooth multi-hop network deployments were reported. The turnaround was triggered by the release of the Bluetooth Low Energy Mesh Profile which is unquestionable a great achievement but not well suited for all use cases of multi-hop networks. This paper surveys the tremendous work done on Bluetooth multi-hop networks during the last 20 years. All aspects are discussed with demands for a real world Bluetooth multi-hop operation in mind. Relationships and side effects of different topics for a real world implementation are explained. This unique focus distinguishes this survey from existing ones. Furthermore, to the best of the authors’ knowledge this is the first survey consolidating the work on Bluetooth multi-hop networks for classic Bluetooth technology as well as for Bluetooth Low Energy. Another individual characteristic of this survey is a synopsis of real world Bluetooth multi-hop network deployment efforts. In fact, there are only four reports of a successful establishment of a Bluetooth multi-hop network with more than 30 nodes and only one of them was integrated in a real world application - namely a photovoltaic power plant. © 2019 The Author
Secure and Privacy-Preserving Data Aggregation Protocols for Wireless Sensor Networks
This chapter discusses the need of security and privacy protection mechanisms
in aggregation protocols used in wireless sensor networks (WSN). It presents a
comprehensive state of the art discussion on the various privacy protection
mechanisms used in WSNs and particularly focuses on the CPDA protocols proposed
by He et al. (INFOCOM 2007). It identifies a security vulnerability in the CPDA
protocol and proposes a mechanism to plug that vulnerability. To demonstrate
the need of security in aggregation process, the chapter further presents
various threats in WSN aggregation mechanisms. A large number of existing
protocols for secure aggregation in WSN are discussed briefly and a protocol is
proposed for secure aggregation which can detect false data injected by
malicious nodes in a WSN. The performance of the protocol is also presented.
The chapter concludes while highlighting some future directions of research in
secure data aggregation in WSNs.Comment: 32 pages, 7 figures, 3 table
Resilient Wireless Sensor Networks Using Topology Control: A Review
Wireless sensor networks (WSNs) may be deployed in failure-prone environments, and WSNs nodes easily fail due to unreliable wireless connections, malicious attacks and resource-constrained features. Nevertheless, if WSNs can tolerate at most losing k − 1 nodes while the rest of nodes remain connected, the network is called k − connected. k is one of the most important indicators for WSNs’ self-healing capability. Following a WSN design flow, this paper surveys resilience issues from the topology control and multi-path routing point of view. This paper provides a discussion on transmission and failure models, which have an important impact on research results. Afterwards, this paper reviews theoretical results and representative topology control approaches to guarantee WSNs to be k − connected at three different network deployment stages: pre-deployment, post-deployment and re-deployment. Multi-path routing protocols are discussed, and many NP-complete or NP-hard problems regarding topology control are identified. The challenging open issues are discussed at the end. This paper can serve as a guideline to design resilient WSNs
- …