Human sit-to-stand transfer modeling towards intuitive and biologically-inspired robot assistance

© 2016, Springer Science+Business Media New York. Sit-to-stand (STS) transfers are a common human task which involves complex sensorimotor processes to control the highly nonlinear musculoskeletal system. In this paper, typical unassisted and assisted human STS transfers are formulated as optimal feedback control problem that finds a compromise between task end-point accuracy, human balance, energy consumption, smoothness of motion and control and takes further human biomechanical control constraints into account. Differential dynamic programming is employed, which allows taking the full, nonlinear human dynamics into consideration. The biomechanical dynamics of the human is modeled by a six link rigid body including leg, trunk and arm segments. Accuracy of the proposed modelling approach is evaluated for different human healthy and patient/elderly subjects by comparing simulations and experimentally collected data. Acceptable model accuracy is achieved with a generic set of constant weights that prioritize the different criteria. Finally, the proposed STS model is used to determine optimal assistive strategies suitable for either a person with specific body segment weakness or a more general weakness. These strategies are implemented on a robotic mobility assistant and are intensively evaluated by 33 elderlies, mostly not able to perform unassisted STS transfers. The validation results show a promising STS transfer success rate and overall user satisfaction

System Identification of Bipedal Locomotion in Robots and Humans

The ability to perform a healthy walking gait can be altered in numerous cases due to gait disorder related pathologies. The latter could lead to partial or complete mobility loss, which affects the patients’ quality of life. Wearable exoskeletons and active prosthetics have been considered as a key component to remedy this mobility loss. The control of such devices knows numerous challenges that are yet to be addressed. As opposed to fixed trajectories control, real-time adaptive reference generation control is likely to provide the wearer with more intent control over the powered device. We propose a novel gait pattern generator for the control of such devices, taking advantage of the inter-joint coordination in the human gait. Our proposed method puts the user in the control loop as it maps the motion of healthy limbs to that of the affected one. To design such control strategy, it is critical to understand the dynamics behind bipedal walking. We begin by studying the simple compass gait walker. We examine the well-known Virtual Constraints method of controlling bipedal robots in the image of the compass gait. In addition, we provide both the mechanical and control design of an affordable research platform for bipedal dynamic walking. We then extend the concept of virtual constraints to human locomotion, where we investigate the accuracy of predicting lower limb joints angular position and velocity from the motion of the other limbs. Data from nine healthy subjects performing specific locomotion tasks were collected and are made available online. A successful prediction of the hip, knee, and ankle joints was achieved in different scenarios. It was also found that the motion of the cane alone has sufficient information to help predict good trajectories for the lower limb in stairs ascent. Better estimates were obtained using additional information from arm joints. We also explored the prediction of knee and ankle trajectories from the motion of the hip joints

Human Activity Recognition and Control of Wearable Robots

abstract: Wearable robotics has gained huge popularity in recent years due to its wide applications in rehabilitation, military, and industrial fields. The weakness of the skeletal muscles in the aging population and neurological injuries such as stroke and spinal cord injuries seriously limit the abilities of these individuals to perform daily activities. Therefore, there is an increasing attention in the development of wearable robots to assist the elderly and patients with disabilities for motion assistance and rehabilitation. In military and industrial sectors, wearable robots can increase the productivity of workers and soldiers. It is important for the wearable robots to maintain smooth interaction with the user while evolving in complex environments with minimum effort from the user. Therefore, the recognition of the user's activities such as walking or jogging in real time becomes essential to provide appropriate assistance based on the activity. This dissertation proposes two real-time human activity recognition algorithms intelligent fuzzy inference (IFI) algorithm and Amplitude omega ($A \omega$) algorithm to identify the human activities, i.e., stationary and locomotion activities. The IFI algorithm uses knee angle and ground contact forces (GCFs) measurements from four inertial measurement units (IMUs) and a pair of smart shoes. Whereas, the $A \omega$ algorithm is based on thigh angle measurements from a single IMU. This dissertation also attempts to address the problem of online tuning of virtual impedance for an assistive robot based on real-time gait and activity measurement data to personalize the assistance for different users. An automatic impedance tuning (AIT) approach is presented for a knee assistive device (KAD) in which the IFI algorithm is used for real-time activity measurements. This dissertation also proposes an adaptive oscillator method known as amplitude omega adaptive oscillator ($A\omega AO$) method for HeSA (hip exoskeleton for superior augmentation) to provide bilateral hip assistance during human locomotion activities. The $A \omega$ algorithm is integrated into the adaptive oscillator method to make the approach robust for different locomotion activities. Experiments are performed on healthy subjects to validate the efficacy of the human activities recognition algorithms and control strategies proposed in this dissertation. Both the activity recognition algorithms exhibited higher classification accuracy with less update time. The results of AIT demonstrated that the KAD assistive torque was smoother and EMG signal of Vastus Medialis is reduced, compared to constant impedance and finite state machine approaches. The $A\omega AO$ method showed real-time learning of the locomotion activities signals for three healthy subjects while wearing HeSA. To understand the influence of the assistive devices on the inherent dynamic gait stability of the human, stability analysis is performed. For this, the stability metrics derived from dynamical systems theory are used to evaluate unilateral knee assistance applied to the healthy participants.Dissertation/ThesisDoctoral Dissertation Aerospace Engineering 201

Musculoskeletal Models in a Clinical Perspective

This book includes a selection of papers showing the potential of the dynamic modelling approach to treat problems related to the musculoskeletal system. The state-of-the-art is presented in a review article and in a perspective paper, and several examples of application in different clinical problems are provided

A multifactorial approach to improving captive primate welfare and enclosure usage

This thesis examines factors affecting the welfare of captive primates from a multi- factorial perspective: positional and non-positional behaviour, anatomical adaptations and enclosure usage. Past studies have shown that the provision of naturalistic environments for primates reduces stereotypical behaviours, decreases inactivity (Honess and Marin 2005; Zaragoza et al. 2011), and encourages species- typical positional behaviour repertoires (Jensvold et al. 2001). This suggests that encouraging species-typical behaviour improves captive primate welfare. It was found that reduced occurrence of stereotypical behaviour was associated with enrichment encouraging tool-use, a high fibre diet, and increased social behaviour. Compared to wild gorillas, captive gorillas adopted similar feeding and resting postures but performed substantially less vertical climbing, likely arising from differences in habitat structure and food distribution. It was found that the genus Gorilla has a strong preference for <20cm diameter and vertical/angled supports, but equally, gorillas have to some extent retained locomotor plasticity as suggested by Myatt et al. (2011) and Neufuss et al. (2014). Thus, from construction of a 3D musculoskeletal model of a hindlimb, it was found that bipedalism was associated with higher moment arms and torque around the hip, knee and ankle (except for extensor torque), than vertical climbing. This indicates that in terms of moment arms and torque, the ability to walk bipedally is not restricted by musculoskeletal adaptations to vertical climbing. It was also found that the gorilla foot had interossei that attached to distal phalanges, which may be important for fine flexion movements for grasping/manipulation of objects. These findings stress the importance of taking into account locomotor restrictions and plasticity when encouraging species-typical behaviour, which has not previously been emphasized. Further, accurate quantification of support availability and preference for enclosure design and positional behaviour studies has not been achieved before. Thus a novel method of studying enclosure usage was developed, via construction and analysis of a computer-aided design model of an enclosure. Besides successful accurate quantification of support preference and availability, the model permitted identification of specific favoured supports/areas and behaviour trends

The biomechanics of human locomotion

Includes bibliographical references. The thesis on CD-ROM includes Animate, GaitBib, GaitBook and GaitLab, four quick time movies which focus on the functional understanding of human gait. The CD-ROM is available at the Health Sciences Library