136,121 research outputs found
Recommended from our members
Synthesis of Silver Nanowires with Reduced Diameters Using Benzoin-Derived Radicals to Make Transparent Conductors with High Transparency and Low Haze.
Reducing the diameter of silver nanowires has been proven to be an effective way to improve their optoelectronic performance by lessening light attenuation. The state-of-the-art silver nanowires are typically around 20 nm in diameter. Herein we report a modified polyol synthesis of silver nanowires with average diameters as thin as 13 nm and aspect ratios up to 3000. The success of this synthesis is based on the employment of benzoin-derived radicals in the polyol approach and does not require high-pressure conditions. The strong reducing power of radicals allows the reduction of silver precursors to occur at relatively low temperatures, wherein the lateral growth of silver nanowires is restrained because of efficient surface passivation. The optoelectronic performance of as-prepared 13 nm silver nanowires presents a sheet resistance of 28 Ω sq-1 at a transmittance of 95% with a haze factor of ∼1.2%, comparable to that of commercial indium tin oxide (ITO)
Gold Nucleation Inhibition by Halide Ions: a Basis for a Seed-Mediated Approach
In the present work, we examine the effect of halide ions on gold nucleation, a typical synthetic variable in the wet-chemical production of gold nanostructures. It was found that the homogeneous nucleation of gold by the chemical reduction of aqueous gold ions is kinetically quenched by an increase in the concentration of halide ions, and this effect grows stronger as the Au–halide complex stability increases. The nucleation quenching is not exclusively related to a specific reducing agent, but appears to be a more general behavior, and is affected by the pH of the media. While no nucleation is observed, Au(I) metastable species coexist together with the reducer, constituting metastable solutions. It is demonstrated that nucleation inhibition by halide ions can be employed as a basis for a seed-mediated approach to produce gold nanostructures. The metastable solutions are proved to function as growth baths, where Au(I) reduction is triggered on the surface of previously synthesized gold nanoparticles, driving their growth in the absence of secondary nucleation. It is also shown how, with this approach, the synthesis conditions can be rationally designed to obtain gold nanoparticles with the desired properties in a controlled and reproducible fashion.Fil: Moiraghi, Raquel. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Instituto de Investigaciones en Físico-química de Córdoba. Universidad Nacional de Córdoba. Facultad de Ciencias Químicas. Instituto de Investigaciones en Físico-química de Córdoba; ArgentinaFil: Douglas Gallardo, Oscar Alejandro. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Instituto de Investigaciones en Físico-química de Córdoba. Universidad Nacional de Córdoba. Facultad de Ciencias Químicas. Instituto de Investigaciones en Físico-química de Córdoba; ArgentinaFil: Coronado, Eduardo A.. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Instituto de Investigaciones en Físico-química de Córdoba. Universidad Nacional de Córdoba. Facultad de Ciencias Químicas. Instituto de Investigaciones en Físico-química de Córdoba; ArgentinaFil: Macagno, Vicente Antonio. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Instituto de Investigaciones en Físico-química de Córdoba. Universidad Nacional de Córdoba. Facultad de Ciencias Químicas. Instituto de Investigaciones en Físico-química de Córdoba; ArgentinaFil: Perez, Manuel Alejo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Instituto de Investigaciones en Físico-química de Córdoba. Universidad Nacional de Córdoba. Facultad de Ciencias Químicas. Instituto de Investigaciones en Físico-química de Córdoba; Argentin
Contribution of the antibiotic chloramphenicol and its analogues as precursors of dichloroacetamide and other disinfection byproducts in drinking water
Dichloroacetamide (DCAcAm), a disinfection byproduct, has been detected in drinking water. Previous research showed that amino acids may be DCAcAm precursors. However, other precursors may be present. This study explored the contribution of the antibiotic chloramphenicol (CAP) and two of its analogues (thiamphenicol, TAP; florfenicol, FF) (referred to collectively as CAPs), which occur in wastewater-impacted source waters, to the formation of DCAcAm. Their formation yields were compared to free and combined amino acids, and they were investigated in filtered waters from drinking-water-treatment plants, heavily wastewater-impacted natural waters, and secondary effluents from wastewater treatment plants. CAPs had greater DCAcAm formation potential than two representative amino acid precursors. However, in drinking waters with ng/L levels of CAPs, they will not contribute as much to DCAcAm formation as the μg/L levels of amino acids. Also, the effect of advanced oxidation processes (AOPs) on DCAcAm formation from CAPs in real water samples during subsequent chlorination was evaluated. Preoxidation of CAPs with AOPs reduced the formation of DCAcAm during postchlorination. The results of this study suggest that CAPs should be considered as possible precursors of DCAcAm, especially in heavily wastewater-impacted waters
Crystalline structure and thermotropic behavior of alkyltrimethylphosphonium amphiphiles
Quaternary organophosphonium salts bearing long alkyl chains are cationic surfactants of interest owing to their physical and biological properties. In the present work, the crystal structure and thermotropic behavior of the homologous series of alkyltrimethylphosphonium bromides (nATMP·Br), with the alkyl chain containing an even number (n) of carbon atoms from 12 to 22, have been examined within the 0–300 °C range of temperatures. These compounds were shown to be resistant to heat up to ~390 °C. The phases adopted at different temperatures were detected by DSC, and the structural changes involved in the phase transitions have been characterized by simultaneous WAXS and SAXS carried out in real-time, and by polarizing optical microscopy as well. Three or four phases were identified for n = 12 and 14 or n = 16, respectively, in agreement with the heat exchange peaks observed by DSC. The phase existing at room temperature (Ph-I) was found to be fully crystalline and its crystal lattice was determined by single-crystal X-ray diffraction methods. Ph-II consisted of a semicrystalline structure that can be categorized as Smectic-B with the crystallized ionic pairs hexagonally arranged in layers and the molten alkyl chain confined in the interlayer space. Ph-II of 12ATMP·Br and 14ATMP·Br directly isotropicized upon heating at ~220 °C, whereas for n = 16, it converted into a Smectic-A phase (Ph-III) that needed to be heated above ~240 °C to become isotropic (Ph-Is). The correlation existing between the thermal behavior, phase structure and length of the alkyl side chain has been demonstrated.Peer ReviewedPostprint (published version
Transition on the entropic elasticity of DNA induced by intercalating molecules
We use optical tweezers to perform stretching experiments on DNA molecules
when interacting with the drugs daunomycin and ethidium bromide, which
intercalate the DNA molecule. These experiments are performed in the low-force
regime from zero up to 2 pN. Our results show that the persistence length of
the DNA-drug complexes increases strongly as the drug concentration increases
up to some critical value. Above this critical value, the persistence length
decreases abruptly and remains practically constant for larger drug
concentrations. The contour length of the molecules increases monotonically and
saturates as drugs concentration increases. Measured in- tercalants critical
concentrations for the persistence length transition coincide with reported
values for the helix-coil transition of DNA-drug complexes, obtained from
sedimentation experiments.Comment: This experimental article shows and discuss a transition observed in
the persistence length of DNA molecules when studied as a function of some
intercalating drug concentrations, like daunomycin and ethidium bromide. It
has 15 pages and 4 figures. The article presented here is in preprint forma
Recommended from our members
Computer-Assisted Design of Environmentally Friendly and Light-Stable Fluorescent Dyes for Textile Applications.
Five potentially environmentally friendly and light-stable hemicyanine dyes were designed based on integrated consideration of photo, environmental, and computational chemistry as well as textile applications. Two of them were synthesized and applied in dyeing polyacrylonitrile (PAN), cotton, and nylon fabrics, and demonstrated the desired properties speculated by the programs. The computer-assisted analytical processes includes estimation of the maximum absorption and emission wavelengths, aquatic environmental toxicity, affinity to fibers, and photo-stability. This procedure could effectively narrow down discovery of new potential dye structures, greatly reduce and prevent complex and expensive preparation processes, and significantly improve the development efficiency of novel environmentally friendly dyes
Substrate-specific clades of active marine methylotrophs associated with a phytoplankton bloom in a temperate coastal environment
Marine microorganisms that consume one-carbon (C1) compounds are poorly described, despite their impact on global climate via an influence on aquatic and atmospheric chemistry. This study investigated marine bacterial communities involved in the metabolism of C1 compounds. These communities were of relevance to surface seawater and atmospheric chemistry in the context of a bloom that was dominated by phytoplankton known to produce dimethylsulfoniopropionate. In addition to using 16S rRNA gene fingerprinting and clone libraries to characterize samples taken from a bloom transect in July 2006, seawater samples from the phytoplankton bloom were incubated with 13C-labeled methanol, monomethylamine, dimethylamine, methyl bromide, and dimethyl sulfide to identify microbial populations involved in the turnover of C1 compounds, using DNA stable isotope probing. The [13C]DNA samples from a single time point were characterized and compared using denaturing gradient gel electrophoresis (DGGE), fingerprint cluster analysis, and 16S rRNA gene clone library analysis. Bacterial community DGGE fingerprints from 13C-labeled DNA were distinct from those obtained with the DNA of the nonlabeled community DNA and suggested some overlap in substrate utilization between active methylotroph populations growing on different C1 substrates. Active methylotrophs were affiliated with Methylophaga spp. and several clades of undescribed Gammaproteobacteria that utilized methanol, methylamines (both monomethylamine and dimethylamine), and dimethyl sulfide. rRNA gene sequences corresponding to populations assimilating 13C-labeled methyl bromide and other substrates were associated with members of the Alphaproteobacteria (e.g., the family Rhodobacteraceae), the Cytophaga-Flexibacter-Bacteroides group, and unknown taxa. This study expands the known diversity of marine methylotrophs in surface seawater and provides a comprehensive data set for focused cultivation and metagenomic analyses in the future
- …