Texture evolution in biocompatible Mg-Y-Re alloy after friction stir processing

The presented study deals with the investigation of biocompatible WE 43 Mg-based alloy processed via the combination of rotary swaging (RS) and friction stir processing (FSP) at three different rotational speeds of 400 RPM, 800 RPM, and 1200 RPM. The structure observations primarily focused on texture development and characterizations of grain sizes and grain boundaries. The results showed that swaging plus processing at 400 RPM and 1200 RPM lead to substantial recrystallization and grain refinement. The fractions of low angle grain boundaries within the 400 RPM and 1200 RPM samples were approximately 11%, while for the 800 RPM sample exhibiting secondary recrystallization it was about 22%. The grains were also the finest in the 1200 RPM sample (average grain diameter of 1.8 mu m). The processed structures exhibited a slight tendency to form the {10-10} preferential fiber texture (especially the 800 RPM sample). Tensile testing showed the FSP to have positive influence on the ultimate tensile stress, as well as ductility of all the samples; the mechanical properties improved with increasing FSP rate.Web of Science911art. no. 118

Comparison of AIS Versus TMS Data Collected over the Virginia Piedmont

The Airborne Imaging Spectrometer (AIS, NS001 Thematic Mapper Simlulator (TMS), and Zeiss camera collected remotely sensed data simultaneously on October 27, 1983, at an altitude of 6860 meters (22,500 feet). AIS data were collected in 32 channels covering 1200 to 1500 nm. A simple atmospheric correction was applied to the AIS data, after which spectra for four cover types were plotted. Spectra for these ground cover classes showed a telescoping effect for the wavelength endpoints. Principal components were extracted from the shortwave region of the AIS (1200 to 1280 nm), full spectrum AIS (1200 to 1500 nm) and TMS (450 to 12,500 nm) to create three separate three-component color image composites. A comparison of the TMS band 5 (1000 to 1300 nm) to the six principal components from the shortwave AIS region (1200 to 1280 nm) showed improved visual discrimination of ground cover types. Contrast of color image composites created from principal components showed the AIS composites to exhibit a clearer demarcation between certain ground cover types but subtle differences within other regions of the imagery were not as readily seen

Barnes Hospital Bulletin

https://digitalcommons.wustl.edu/bjc_barnes_bulletin/1200/thumbnail.jp

Filterbank optimization with convex objectives and the optimality of principal component forms

This paper proposes a general framework for the optimization of orthonormal filterbanks (FBs) for given input statistics. This includes as special cases, many previous results on FB optimization for compression. It also solves problems that have not been considered thus far. FB optimization for coding gain maximization (for compression applications) has been well studied before. The optimum FB has been known to satisfy the principal component property, i.e., it minimizes the mean-square error caused by reconstruction after dropping the P weakest (lowest variance) subbands for any P. We point out a much stronger connection between this property and the optimality of the FB. The main result is that a principal component FB (PCFB) is optimum whenever the minimization objective is a concave function of the subband variances produced by the FB. This result has its grounding in majorization and convex function theory and, in particular, explains the optimality of PCFBs for compression. We use the result to show various other optimality properties of PCFBs, especially for noise-suppression applications. Suppose the FB input is a signal corrupted by additive white noise, the desired output is the pure signal, and the subbands of the FB are processed to minimize the output noise. If each subband processor is a zeroth-order Wiener filter for its input, we can show that the expected mean square value of the output noise is a concave function of the subband signal variances. Hence, a PCFB is optimum in the sense of minimizing this mean square error. The above-mentioned concavity of the error and, hence, PCFB optimality, continues to hold even with certain other subband processors such as subband hard thresholds and constant multipliers, although these are not of serious practical interest. We prove that certain extensions of this PCFB optimality result to cases where the input noise is colored, and the FB optimization is over a larger class that includes biorthogonal FBs. We also show that PCFBs do not exist for the classes of DFT and cosine-modulated FBs

Barnes Hospital Record

https://digitalcommons.wustl.edu/bjc_barnes_record/1200/thumbnail.jp

Radiocarbon and Oxidizable Carbon Ratio Dates from Archaeological Sites in East Texas, Part II

This paper presents a second compilation of recently obtained radiocarbon and oxidizable carbon ratio dates obtained from archaeological sites in East Texas. An analysis of the age ranges in the more than 585 dates from East Texas archaeological sites indicate that most pertain to prehistoric and protohistoric Caddoan Indian occupations, particularly the Early (A.D. 1000-1200) and Middle Caddoan (A.D. 1200-1400) periods when prehistoric Caddoan settlements were widely distributed throughout the region

Outlook Magazine, Winter 2016

https://digitalcommons.wustl.edu/outlook/1200/thumbnail.jp

EFA baseline school designs: secondary type 1 1200

1200 places - 11-16 typical curriculu