The effects of the interaction of polymeric materials with the space environment

Polymeric materials in low earth orbit will be exposed to a harmful environment mainly due to atomic oxygen and ultraviolet radiation. In geosynchronous earth orbit, the major hazards to such materials are energetic charged particles and ultraviolet radiation. The progress of studies on the effects of these hazards on a polyetherimide, a polyimide, and an epoxy adhesive is presented

Effects of carbon nanotubes/graphene nanoplatelets hybrid systems on the structure and properties of polyetherimide-based foams

Foams based on polyetherimide (PEI) with carbon nanotubes (CNT) and PEI with graphene nanoplatelets (GnP) combined with CNT were prepared by water vapor induced phase separation. Prior to foaming, variable amounts of only CNT(0.1–2.0wt%) or a combination of GnP(0.0–2.0 wt %) and CNT (0.0–2.0 wt %) for a total amount of CNT-GnP of 2.0 wt %, were dispersed in a solvent using high power sonication, added to the PEI solution, and intensively mixed. While the addition of increasingly higher amounts of only CNT led to foams with more heterogeneous cellular structures, the incorporation of GnP resulted in foams with ¿ner and more homogeneous cellular structures. GnP in combination with CNT effectively enhanced the thermal stability of foams by delaying thermal decomposition and mechanically-reinforced PEI. The addition of 1.0 wt % GnP in combination with 1.0 wt % CNT resulted in foams with extremely high electrical conductivity, which was related to the formation of an optimum conductive network by physical contact between GnP layers and CNT, enabling their use in electrostatic discharge (ESD) and electromagnetic interference (EMI) shielding applications. The experimental electrical conductivity values of foams containing only CNT ¿tted well to a percolative conduction model, with a percolation threshold of 0.06 vol % (0.1 wt %) CNTPostprint (published version

Polyetherimide foams filled with low content of graphene nanoplatelets prepared by scCO2 dissolution

Polyetherimide (PEI) foams with graphene nanoplatelets (GnP) were prepared by supercritical carbon dioxide (scCO2) dissolution. Foam precursors were prepared by melt-mixing PEI with variable amounts of ultrasonicated GnP (0.1–2.0 wt %) and foamed by one-step scCO2 foaming. While the addition of GnP did not significantly modify the cellular structure of the foams, melt-mixing and foaming induced a better dispersion of GnP throughout the foams. There were minor changes in the degradation behaviour of the foams with adding GnP. Although the residue resulting from burning increased with augmenting the amount of GnP, foams showed a slight acceleration in their primary stages of degradation with increasing GnP content. A clear increasing trend was observed for the normalized storage modulus of the foams with incrementing density. The electrical conductivity of the foams significantly improved by approximately six orders of magnitude with only adding 1.5 wt % of GnP, related to an improved dispersion of GnP through a combination of ultrasonication, melt-mixing and one-step foaming, leading to the formation of a more effective GnP conductive network. As a result of their final combined properties, PEI-GnP foams could find use in applications such as electrostatic discharge (ESD) or electromagnetic interference (EMI) shieldingPostprint (published version

The effect of phase inversion promoters on the structure and performance of polyetherimide hollow fiber membrane using in gas-liquid contacting process

Low molecular weight organic compounds were added to the spinning dope as phase inversion promoters and their effects on the structure of polyetherimide (PEI) hollow fibers as well as their performance as membrane contactor were investigated. Water, methanol, ethanol, glycerol and acetic acid were added individually to the solvent NMP to prepare a dope containing 15 wt% PEI, 4 wt% additive, 81 wt% NMP and hollow fiber membranes were fabricated via wet spinning method.The solution containing water as the additive had the lowest thermodynamic stability and highest viscosity, which yielded hollow fiber with a thin skin layer of high porosity and a sublayer with sponge-like structure. The four other polymer solutions were more stable thermodynamically and less viscous. Fast solvent/coagulant exchange yielded thick skin layers of lower porosity and sublayers of finger-like macrovoids.Among all fabricated follow fibers, adding methanol resulted in the highest absorption flux, which was ascribed to its high porosity and low tortuosity

Effects of graphene nanoplatelets and cellular structure on the thermal conductivity of polysulfone nanocomposite foams

Polysulfone (PSU) foams containing 0–10 wt% graphene nanoplatelets (GnP) were prepared using two foaming methods. Alongside the analysis of the cellular structure, their thermal conductivity was measured and analyzed. The results showed that the presence of GnP can a ect the cellular structure of the foams prepared by both water vapor induced phase separation (WVIPS) and supercritical CO2 (scCO2) dissolution; however, the impact is greater in the case of foams prepared by WVIPS. In terms of thermal conductivity, the analysis showed an increasing trend by incrementing the amount of GnP and increasing relative density, with the tortuosity of the cellular structure, dependent on the used foaming method, relative density, and amount of GnP, playing a key role in the final value of thermal conductivity. The combination of all these factors showed the possibility of preparing PSU-GnP foams with enhanced thermal conductivity at lower GnP amount by carefully controlling the cellular structure and relative density, opening up their use in lightweight heat dissipatorsPostprint (published version

Study of improved resins for advanced supersonic technology composites. Part 1: Heteroaromatic polymers containing ether groups. Part 2: Curing chemistry of aromatic polymers and composite studies

Fourteen ether-containing, aromatic dianhydrides have been synthesized from N-phenyl-3 or 4-nitrophthalimide and various bisphenols. The process involves nucleophilic displacement of activated nitro groups with bisphenolate ions. Ether-containing dianhydrides were indefinitely stable in the presence of atmospheric moisture. One-step, high temperature solution polymerization of the ether-containing dianhydrides with m-phenylene diamine, 4,4'-oxydianiline and 1, 3-bis(4-aminophenoxy)benzene afforded 42 polyetherimides. The polyetherimides were all soluble in m-cresol except two which were found to be crystalline. The glass transition temperatures of the polyetherimides ranged from 178 to 277 C. Soluble polybenzimidazopyrrolones containing ether groups were also prepared from the same ether-containing dianhydrides and aromatic tetraamines by one-step solution polymerization. Using low molecular weight polyetherimides, various thermoset resin systems were developed and tested as matrices for fiber-reinforced composites. The curing chemistry involving reaction of the phthalonitrile group and the o-diaminophenyl group was found to be generally applicable to crosslinking various aromatic polymers other than polyimides

Evaluating the Effectiveness of Shielding Material, Vehicle Shape and Astronaut Position for Deep Space Travel

Background: As future crewed, deep space missions are being planned, it is important to assess how spacecraft design can be used to minimize radiation exposure. Collectively with shielding material, vehicle shape and astronaut position must be used to protect astronauts from the two primary sources of space radiation: Galactic Cosmic Rays (GCRs) and Solar Particle Events (SPEs). Methods: The On-Line Tool for the Assessment of Radiation in Space (OLTARIS) version 4.1 analysis package is used to evaluate and analyze this detailed radiation field. Developed by the National Aeronautics and Space Administration\u27s (NASA) Langley Research Center, the tool enables engineering and research related space radiation calculations. Each configuration is evaluated in whole body effective dose equivalent (ED). This research evaluates 70 aerospace materials, 2 vehicle shapes and 3 astronaut positions. Results and Conclusions: The material analyses show that for metals, aluminum outperforms and therefore is the most feasible metal for deep space travel. But when evaluating all materials, polyethylene outperforms all feasible aerospace materials. The vehicle shape and astronaut position analyses show that moving a human phantom closer to a wall does significantly decrease the ED. This pattern is not dependent on material nor boundary condition, but the mean shielding thickness a source ray must travel through for the GCR boundary condition. For shielding thicknesses greater than 30 g/cm 2 for polyethylene and 100g/cm 2 for aluminum, the results suggest that having astronauts’ habitats and work areas located further from the center will help protect astronauts longer from deep space radiation.https://scholarscompass.vcu.edu/gradposters/1067/thumbnail.jp