Strength Tests on Thin-walled Duralumin Cylinders in Torsion

This report is the first of a series presenting the results of strength tests on thin-walled cylinders and truncated cones of circular and elliptical section; it comprises the results obtained to date from torsion (pure shear) tests on 65 thin-walled duralumin cylinders of circular section with ends clamped to rigid bulkheads. The effect of variations in the length/radius and radius/thickness ratios on the type of failure is indicated, and a semi-empirical equation for the shearing stress at maximum load is given

The compressive strength of duralumin columns of equal angle section

This report presents a chart giving the compressive strength of duralumin columns of equal angle section. The data used in the construction of the chart were obtained from various published sources and were correlated with theory in the range where secondary failure occurred. Appendices are included giving excerpts from Army and Navy specifications for duralumin and approximate formulas for the properties of the equal angle section

Data analyses in connection with the national geodetic satellite program

Station Cartesian coordinates in SAO systems using Geos

The feasibility and design of optical sensors for modal control

The feasibility of optical type sensors for control of flexible bodies was examined. The accuracies of such systems were determined via simulation and the sources of potential errors were designated. An initial laboratory design was effected and preliminary results obtained. These results are discussed critically with applications to future studies and system designs

Comparison of Three Methods for Calculating the Compressive Strength of Flat and Slightly Curved Sheet and Stiffener Combinations

This report gives a comparison of the accuracy of the three methods for calculating the compressive strength of flat sheet and stiffener combinations such as occur in stressed-skin or monocoque structures for aircraft. Of the three methods based upon various assumptions with regard to the interaction of sheet and stiffener, the method based upon mutual action of the stiffener and an effective width as a column gave the best agreement with the results of the tests. An investigation of the effect of small curvature resulted in the conclusion that the compressive strength of the curved panels is, for all practical purposes, equal to the strength of flat panels except for thick sheet where non-uniform curvature throughout the length may cause the strength of the curved panel to be 10 to 15 percent less than that of a corresponding flat panel

The Forecasting Performance of Business Economists During the Great Recession

It is generally believed that the recession of 2007-2009 was not foreseen by business economists. Is this perceived view accurate? We explore this issue by examining business economists’ published statements about economic conditions. We compare these qualitative forecasts with the Beige Book. We conclude that both sets of data are similar and that business economists are responsive to information about the economy and adjust their predictions quickly.Business forecasts; Great Recession; Beige Book; Payroll Data

Preparation of high purity copper fluoride by fluorinating copper hydroxyfluoride

Copper fluoride containing no more than 50 ppm of any contaminating element was prepared by the fluorination of copper hydroxyfluoride. The impurity content was obtained by spark source mass spectrometry. High purity copper fluoride is needed as a cathode material for high energy density batteries

First and subsequent return stroke properties of cloud-to-ground lightning

Lightning properties obtained by a network of magnetic direction finders and by electric field measurements for distances from 50 to 500 km are compared for three summer thunderstorms in Sweden. The data from direct field recordings indicate 31, 17, and 26 pcts. of negative subsequent return strokes with peak current (as inferred from the peak electric field) higher than the first. Electric fields from first strokes are compared with normalized amplitudes registered by the magnetic direction finding system. The efficiency of detection by the magnetic direction finding system is discussed in terms of the percentage of lightning flashes observed by electric field measurements that are not localized. Statistics of the number of strokes per flash and the interstroke time intervals are presented