3,102 research outputs found
Spinodal phase separation in semi-interpenetrating polymer networks - polystyrene-cross-polymethacrylate
Morphology control in semi-interpenetrating polymer networks has been achieved by means of a two-step process, separating morphology formation and polymerization/crosslinking. Phase textures formed during spinodal liquid/liquid demixing of a solution of atactic polystyrene in methacrylate monomers were arrested by thermoreversible gelation of the polymer-rich phase as this phase passed its glass transition temperature. The phase separated structure was permanently stabilized by low-temperature crosslinking ultraviolet (UV) polymerization of the methacrylate monomer, and studied by transmission electron microscopy. Thus, it was directly observed how the initial demixing process depended on the initial viscosity of the polymer solution and the mode of quenching. Arrest of the earliest stage of spinodal demixing resulted in separated domains of 0.05-0.08 m thickness, which were separated by a distance of the spinodal wavelength . A cocontinuous network only developed in a relatively late stage of demixing
Influence of the bulk and surface morphology on adhesion of polystyrene-inter-poly-cross-2-ethylhexyl-methacrylate films and particles
The adhesion behavior of semi-interpenetrating polymer networks (semi-IPNs) of linear polystyrene (PS) in crosslinked poly-2-ethylhexylmethacrylate (EHMA) was studied by variation of the bulk and surface morphology, i.e., domain size, continuity, and concentration in the domains. Semi-IPNs were prepared by liquid-liquid demixing upon cooling of a homogeneous solution of PS in methacrylate monomer, followed by gelation of the PS-rich phase and UV polymerization of the methacrylate resin. Welding of films allowed the preparation of larger objects provided that (1) the samples were phase separated to a high degree and contained domains with a high PS concentration (>90%) and (2) polystyrene was present at the interface. For semi-IPN films, a linear dependence of the adhesion strength on the (crack healing time)1/4 was obtained. Based on these considerations, a process was developed to obtain melt-processable semi-IPN particles, by quenching droplets of the polymer solution into a cold liquid. These particles obtained a PS-rich skin layer and showed good adhesion after blending with a thermoplast
Effects of repeated consumption on sensory-enhanced satiety
Previous research suggests that sensory characteristics of a drink modify the acute satiating effects of its nutrients, with enhanced satiety evident when a high energy drink was thicker and tasted creamier. The present study tested whether this modulation of satiety by sensory context was altered by repeated consumption. Participants (n=48) consumed one of four drinks mid-morning on seven non-consecutive days with satiety responses measured pre-exposure (day 1), post-exposure (day 6) and at a one month follow-up. Drinks combined two levels of energy (lower energy, LE, 326 KJ: higher energy, HE, 1163KJ) with two levels of satiety-predictive sensory characteristics (low-sensory, LS, or enhanced sensory, ES). Test lunch intake 90 minutes after drink consumption depended on both the energy content and sensory characteristics of the drink before exposure, but on energy content alone at post-exposure and the follow-up. The largest change was an increase in test meal intake over time in the LE/LS condition. Effects on intake were reflected in appetite ratings, with rated hunger and expected filling affected by sensory characteristics and energy content pre-exposure, but were largely determined by energy content post exposure and at follow up. In contrast, a measure of expected satiety reflected sensory characteristics regardless of energy content on all three test days. Overall these data suggest that some aspects of the sensory-modulation of satiety are changed by repeated consumption, with covert energy becoming more effective in suppressing appetite over time, but also suggest that these behavioural changes are not readily translated into expectations of satiety
Evaluation of the recreational marron fishery against environmental change and human interaction: Final FRDC Report – Project No. 2003/027
The distribution of marron in the southwest of Australia has seen many changes since European settlement. Reconstructions of their range from historical records suggested that marron inhabited the waters between the Harvey River and Denmark River. Due to translocation, their range has expanded as far north as the Hutt River and as far east as Esperance. Although at present marron still exist in all the original rivers within the southwest, their distribution within these rivers has contracted. Poor water quality, salinity, low rainfall and environmental degradation in the upper and lower reaches have restricted marron populations
Estimating and mitigating post-release mortality of European eel by combining citizen science with a catch-and-release angling experiment
Several anguillid eel species have experienced severe population declines over the past decades, particularly the European eel (Anguilla anguilla), which is listed as critically endangered by the International Union for Conservation of Nature. To reduce fishing mortality, many European countries have introduced strict recreational eel fishing regulations increasing regulatory catch-and-release (C&R) practice. Despite high release rates, only limited information exists on the potential consequences of C&R on eels. A field experiment was conducted with pre-tagged eels in a semi-natural environment to investigate lethal and sublethal impacts of C&R. The experiment was combined with a citizen science study evaluating the effects of different hooks on catch rates, fish size, and hooking location to develop best practice guidelines. Short-term mortality (≤72 h) ranged from 0.0–18.2%, and adjusted long-term mortality (>72 h) from 0.0–46.2% depending on treatments, resulting in adjusted total mortality rates between 8.4% and 64.4% at the end of the study period (≥43 d). The only significant predictor of mortality was the occurrence of bleeding from hooking injuries. Deep hooking was common, and only few deep-hooked eels for which the fishing line was cut and the hook left in place shed the hook after release. However, no significant effect of C&R on eel condition was found. The citizen science study showed that anglers can significantly decrease the catch of small eels, and thus release rates, by using large J-hooks. Furthermore, large J-hooks or circle hooks reduced the likelihood of deep hooking compared to small J-hooks. Post-release mortality of eels caught in recreational fisheries needs to be considered in future stock assessments and management plans to ensure conservation of the European eel. This study also highlights the strength of combining citizen science with experimental studies to develop best practice guidelines promoting fish conservation.publishedVersio
WA Native Fish Strategy: Freshwater fish distribution database and website: Prepared for the Natural Resource Management (NRM) Office – NRM Project No. 063059
Een eerste kennismaking met onderwaterdrones in Indonesië
In Nederland worden steeds vaker onderwaterdrones ingezet voor aquatische monitoring van ecologie en waterkwaliteit. Het eerste grootschalige nationale onderzoek met aquatische drones werd in 2013 uitgevoerd in het kader van het programma ‘Collaboratorium Klimaat en Weer’ [1] naar de waterkwaliteit onder drijvende woningen door Tauw, DeltaSync en Deltares en de hogescholen van Rotterdam en Groningen, waaruit bleek dat de effecten op o.a. zuurstofgehalte klein waren en het goede ecologische vestigingsplaatsen (o.a. mosselen en schuilplaatsen zijn voor kleine vissen) [2]. Na dit onderzoek hebben twee betrokken lectoren in 2015 het bedrijf INovatieve DYnamische MOnitoring (INDYMO) opgericht om de toepassing van aquatische drones in waterbeheer verder te onderzoeken in nauwe samenwerking met diverse overheden en kennisinstituten. INDYMO verbindt onderzoek, ondernemerschap en onderwijs en heeft vestigingen in YES!Delft en de watercampus in Leeuwarden, die nauw samenwerken met o.a. TU Delft en de hogescholen Groningen, Rotterdam en hogeschool Van Hall Larenstein
Spinodal phase separation in semi-interpenetrating polymer networks—polystyrene-cross-polymethacrylate
Morphology control in semi-interpenetrating polymer networks has been achieved by means of a two-step process, separating morphology formation and polymerization/crosslinking. Phase textures formed during spinodal liquid/liquid demixing of a solution of atactic polystyrene in methacrylate monomers were arrested by thermoreversible gelation of the polymer-rich phase as this phase passed its glass transition temperature. The phase separated structure was permanently stabilized by low-temperature crosslinking ultraviolet (UV) polymerization of the methacrylate monomer, and studied by transmission electron microscopy. Thus, it was directly observed how the initial demixing process depended on the initial viscosity of the polymer solution and the mode of quenching. Arrest of the earliest stage of spinodal demixing resulted in separated domains of 0.05-0.08 m thickness, which were separated by a distance of the spinodal wavelength . A cocontinuous network only developed in a relatively late stage of demixing
- …