Over-expression of NAD kinase in Corynebacterium crenatum and its Impact on L-Arginine Biosynthesis

Purpose: To improve the biosynthesis of L-arginine by overexpressing homologous NAD kinase (ppnk) in Corynebacterium crenatum SYPA5-5 and to study its impact in presence of high (HOS) and low oxygen supply (LOS).Methods: A recombinant plasmid (pJC1-tac-ppnK) harboring homologous NAD kinase (ppnk) was constructed in a shuttle vector pJC1 and transferred in L-arginine producing strain Corynebacterium crenatum SYPA5-5. Furthermore, fermentation was performed by shake flask method with consecutive determination of cell growth and glucose concentration. NAD+ kinase activity was studied by stop method and NADP(H) concentrations were determined by spectrophotometric enzymatic cycling method. To check the biosynthesis of amino acids, HPLC method was used to determine extracellular amino acid concentrations.Results: In HOS condition, NAD+ kinase activity increased by 116 %, while intracellular concentrations of NADP+ and NADPH increased by 7.3 and 36.8 %, respectively. Whereas, in LOS condition , NAD+ kinase activity increased 49 % , with intracellular 14.67 and 15 % increases in NADP+ and NADPHrespectively. More importantly, recombinant strain could produce 26.47 and 11.36 g/L L-arginine in HOS and LOS respectively, which is higher than control strain value of 24.29 and 7.58 g/L respectively.Conclusion: These results suggest that altering the concentration of co-enzymes by NAD kinase in Corynebacterium crenatum is an effective way to increase NADP+ with concurrent production of NADPH for further enhanced L-arginine biosynthesis in Corynebacterium crenatum in both conditions of high and low oxygen supply.Keywords: NAD kinase, PpnK, L-arginine, Corynebacterium crenatu

Irradiation-induced molecular dipole reorientation in inverted polymer solar cell using small molecular electron collection layer

Inverted polymer solar cell is developed using small molecular tris(8-hydroxyquinolinato) aluminum (Alq3) as an electron collection layer between the active layer and indium-tin-oxide bottom cathode. Upon post-processing light irradiation by simulated solar illumination, the open-circuit voltage of the inverted device increases from 0.52 V to 0.60 V, resulting in the enhancement of the power conversion efficiency from 2.54 to 3.33 with negligible change in the short-circuit current. The performance improvement is attributed to the removal of surface potential due to irradiation-induced molecular dipole reorientation in the Alq3 layer, which reduces the charge transport barrier and improves the charge collection efficiency. © 2011 American Institute of Physics

The role of microbial diversity and composition in minimizing sludge production in the oxic-settling-anoxic process

© 2017 Elsevier B.V. The oxic-settling-anoxic (OSA) process, which involves an aerobic tank attached to oxygen- and substrate-deficient external anoxic reactors, minimizes sludge production in biological wastewater treatment. In this study, the microbial community structure of OSA was determined. Principal coordinate analysis showed that among the three operational factors, i.e., (i) redox condition, (ii) external reactor sludge retention time (SRText), and (iii) sludge interchange between aerobic and anoxic reactors, redox condition had the greatest impact on microbial diversity. Generally, reactors with lower oxidation-reduction potential had higher microbial diversity. The main aerobic sequencing batch reactor of OSA (SBROSA) that interchanged sludge with an external anoxic reactor had greater microbial diversity than SBRcontrol which did not have sludge interchange. SBROSA sustained high abundance of the slow-growing nitrifying bacteria (e.g., Nitrospirales and Nitrosomondales) and consequently exhibited reduced sludge yield. Specific groups of bacteria facilitated sludge autolysis in the external reactors. Hydrolyzing (e.g., Bacteroidetes and Chloroflexi) and fermentative (e.g., Firmicutes) bacteria, which can break down cellular matter, proliferated in both the external aerobic/anoxic and anoxic reactors. Sludge autolysis in the anoxic reactor was enhanced with the increase of predatory bacteria (e.g., order Myxobacteriales and genus Bdellovibrio) that can contribute to biomass decay. Furthermore, β- and γ-Proteobacteria were identified as the bacterial phyla that primarily underwent decay in the external reactors

Efficient inverted polymer solar cells with thermal-evaporated and solution-processed small molecular electron extraction layer

Efficient inverted polymer solar cell is reported upon by integrating with a small molecular 1,3,5-tri(phenyl-2-benzimi-dazolyl)-benzene (TPBi) electron extraction layer (EEL) at low processing temperature with thermal-evaporation and solution-process, resulting in the power conversion efficiencies of 3.70 and 3.47, respectively. The potential of TPBi as an efficient EEL is associated with its suitable electronic energy level for electron extraction and hole blocking from the active layer to the indium tin oxide cathode. © 2013 American Institute of Physics

Enhanced performance in polymer photovoltaic cells with chloroform treated indium tin oxide anode modification

Enhanced performance of a poly(3-hexylthiophene):(6,6)-phenyl C61 butyric acid methyl ester bulk heterojunction polymer photovoltaic cell is reported by modifying the indium tin oxide (ITO) anode with chloroform solution. Instead of the traditional UV-ozone treatment, the optimized chloroform modification on ITO anode can result in an enhancement in the power conversion efficiency of an identical device, originating from an increase in the photocurrent with negligible change in the open-circuit voltage. The performance enhancement is attributed to the work function modification of the ITO substrate through the surface incorporation of the chlorine, and thus improved charge collection efficiency. © 2011 American Institute of Physics

Engineering and Tuning of Quantum Emitters in Few-Layer Hexagonal Boron Nitride

© 2019 American Chemical Society. Quantum technologies require robust and photostable single photon emitters (SPEs). Hexagonal boron nitride (hBN) has recently emerged as a promising candidate to host bright and optically stable SPEs operating at room temperature. However, the emission wavelength of the fluorescent defects in hBN has, to date, been shown to be uncontrolled, with a widespread of zero phonon line (ZPL) energies spanning a broad spectral range (hundreds of nanometers), which hinders the potential development of hBN-based devices and applications. Here we demonstrate chemical vapor deposition growth of large-area, few-layer hBN films that host large quantities of SPEs: -100-200 per 10 × 10 μm 2 . More than 85% of the emitters have a ZPL at (580 ± 10) nm, a distribution that is an order of magnitude narrower than reported previously. Furthermore, we demonstrate tuning of the ZPL wavelength using ionic liquid devices over a spectral range of up to 15 nm-the largest obtained to date from any solid-state SPE. The fabricated devices illustrate the potential of hBN for the development of hybrid quantum nanophotonic and optoelectronic devices based on two-dimensional materials

Resonant Excitation of Quantum Emitters in Hexagonal Boron Nitride

© 2017 American Chemical Society. Quantum emitters in layered hexagonal boron nitride (hBN) have recently attracted a great deal of attention as promising single photon sources. In this work, we demonstrate resonant excitation of a single defect center in hBN, one of the most important prerequisites for employment of optical sources in quantum information processing applications. We observe spectral line widths of an hBN emitter narrower than 1 GHz while the emitter experiences spectral diffusion. Temporal photoluminescence measurements reveal an average spectral diffusion time of around 100 ms. An on-resonance photon antibunching measurement is also realized. Our results shed light on the potential use of quantum emitters from hBN in nanophotonics and quantum information processing applications

Grouted jetted precast concrete sheet piles: Method, experiments, and applications

This paper introduces an innovative technology - grouted jetted precast concrete piling - that increases the efficiency of piling operations in coastal regions. The technology includes the following steps: (i) casting concrete piles factory-designed especially for jetting and grouting; (ii) jetting to drive the concrete piles with a crane on a floating ship or platform into soil; and (iii) grouting to enhance the sheet pile connections and to increase the pile bearing capacity. This technology was applied to a number of piling construction projects at the mouth of the Yellow River Delta in China, and this experience demonstrated that it is a robust, fast track, cost-effective, and environmentally friendly piling method. © 2006 NRC Canada.published_or_final_versio

Surface plasmon-enhanced electroluminescence in organic light-emitting diodes incorporating Au nanoparticles

Surface plasmon-enhanced electroluminescence (EL) in an organic light-emitting diode is demonstrated by incorporating the synthesized Au nanoparticles (NPs) in the hole injection layer of poly(3,4-ethylene dioxythiophene):polystyrene sulfonic acid. An increase of ∼25% in the EL intensity and efficiency are achieved for devices with Au NPs, whereas the spectral and electrical properties remain almost identical to the control device. Time-resolved photoluminescence spectroscopy reveals that the EL enhancement is ascribed to the increase in spontaneous emission rate due to the plasmonic near-field effect induced by Au NPs. © 2012 American Institute of Physics