A stochastic-hydrodynamic model of halo formation in charged particle beams

The formation of the beam halo in charged particle accelerators is studied in the framework of a stochastic-hydrodynamic model for the collective motion of the particle beam. In such a stochastic-hydrodynamic theory the density and the phase of the charged beam obey a set of coupled nonlinear hydrodynamic equations with explicit time-reversal invariance. This leads to a linearized theory that describes the collective dynamics of the beam in terms of a classical Schr\"odinger equation. Taking into account space-charge effects, we derive a set of coupled nonlinear hydrodynamic equations. These equations define a collective dynamics of self-interacting systems much in the same spirit as in the Gross-Pitaevskii and Landau-Ginzburg theories of the collective dynamics for interacting quantum many-body systems. Self-consistent solutions of the dynamical equations lead to quasi-stationary beam configurations with enhanced transverse dispersion and transverse emittance growth. In the limit of a frozen space-charge core it is then possible to determine and study the properties of stationary, stable core-plus-halo beam distributions. In this scheme the possible reproduction of the halo after its elimination is a consequence of the stationarity of the transverse distribution which plays the role of an attractor for every other distribution.Comment: 18 pages, 20 figures, submitted to Phys. Rev. ST A

Beam Loss Studies for Rare Isotope Driver Linacs Final Report

The Fortran 90 RIAPMTQ/IMPACT code package is a pair of linked beam-dynamics simulation codes that have been developed for end-to-end computer simulations of multiple-charge-state heavy-ion linacs for future exotic-beam facilities. These codes have multiple charge-state capability, and include space-charge forces. The simulations can extend from the low-energy beam-transport line after an ECR ion source to the end of the linac. The work has been performed by a collaboration including LANL, LBNL, ANL, and MSU. The code RIAPMTQ simulates the linac front-end beam dynamics including the LEBT, RFQ, and MEBT. The code IMPACT simulates the beam dynamics of the main superconducting linac. The codes have been benchmarked for rms beam properties against previously existing codes at ANL and MSU. The codes allow high-statistics runs on parallel supercomputing platforms, particularly at NERSC at LBNL, for studies of beam losses. The codes also run on desktop PC computers for low-statistics work. The code package is described in more detail in a recent publication [1] in the Proceedings of PAC07 (2007 US Particle Accelerator Conference). In this report we describe the main activities for the FY07 beam-loss studies project using this code package

Levy-Student Distributions for Halos in Accelerator Beams

We describe the transverse beam distribution in particle accelerators within the controlled, stochastic dynamical scheme of the Stochastic Mechanics (SM) which produces time reversal invariant diffusion processes. This leads to a linearized theory summarized in a Shchr\"odinger--like (\Sl) equation. The space charge effects have been introduced in a recent paper~\cite{prstab} by coupling this \Sl equation with the Maxwell equations. We analyze the space charge effects to understand how the dynamics produces the actual beam distributions, and in particular we show how the stationary, self--consistent solutions are related to the (external, and space--charge) potentials both when we suppose that the external field is harmonic (\emph{constant focusing}), and when we \emph{a priori} prescribe the shape of the stationary solution. We then proceed to discuss a few new ideas~\cite{epac04} by introducing the generalized Student distributions, namely non--Gaussian, L\'evy \emph{infinitely divisible} (but not \emph{stable}) distributions. We will discuss this idea from two different standpoints: (a) first by supposing that the stationary distribution of our (Wiener powered) SM model is a Student distribution; (b) by supposing that our model is based on a (non--Gaussian) L\'evy process whose increments are Student distributed. We show that in the case (a) the longer tails of the power decay of the Student laws, and in the case (b) the discontinuities of the L\'evy--Student process can well account for the rare escape of particles from the beam core, and hence for the formation of a halo in intense beams.Comment: revtex4, 18 pages, 12 figure

Calculation of wakefields in a 17 GHz beam-driven photonic band-gap accelerator structure

We present the theoretical analysis and computer simulation of the wakefields in a 17 GHz photonic band-gap (PBG) structure for accelerator applications. Using the commercial code CST Particle Studio, the fundamental accelerating mode and dipole modes are excited by passing an 18 MeV electron beam through a seven-cell traveling-wave PBG structure. The characteristics of the longitudinal and transverse wakefields, wake potential spectrum, dipole mode distribution, and their quality factors are calculated and analyzed theoretically. Unlike in conventional disk-loaded waveguide (DLW) structures, three dipole modes (TM[subscript 11]-like, TM[subscript 12]-like, and TM[subscript 13]-like) are excited in the PBG structure with comparable initial amplitudes. These modes are separated by less than 4 GHz in frequency and are damped quickly due to low radiative Q factors. Simulations verify that a PBG structure provides wakefield damping relative to a DLW structure. Simulations were done with both single-bunch excitation to determine the frequency spectrum of the wakefields and multibunch excitation to compare to wakefield measurements taken at MIT using a 17 GHz bunch train. These simulation results will guide the design of next-generation high-gradient accelerator PBG structures.United States. Dept. of Energy. High Energy Physics Division (Contract DEFG02- 91ER40648)China. Fundamental Research Funds for the Central Universities (Contract ZYGX 2010J055

Complementary split-ring resonator-coupled traveling wave accelerating structure

In this paper, we present theoretical and simulation-based analyses of a novel, normal-conducting, multiple-cell, traveling wave accelerating structure. Instead of the conventional circular apertures, we utilize asymmetric complementary split-ring resonators to couple pillbox cavities and bring the phase velocity below that of the speed of light in vacuo. We show that this architecture exhibits a low, negative, group velocity and that the 0 through π modes decrease in order of frequency—in contrast to conventional electrically coupled structures in which the 0 mode has the lowest frequency and the π mode the highest. We illustrate the efficacy of the proposed design via electromagnetic and particle simulation results for a four-cell structure operating around 1.9 GHz. Results are given for operation in the π, 2π/3, and π/3 modes. Our design achieves accelerating gradients of around 3.3  MV/m and a cavity voltage of 0.594 MV for an applied rf power of 82 kW (π mode). The accelerating gradients achieved are up to 3.3 times that of a conventional circular aperture-coupled design with the same phase velocity, rf excitation power, operating frequency, mode type, and number of cells

Conceptual design of an RFQ accelerator-based neutron source for boron neutron-capture therapy

We present a conceptual design of a low-energy neutron generator for treatment of brain tumors by boron neutron capture theory (BNCT). The concept is based on a 2.5-MeV proton beam from a radio-frequency quadrupole (RFQ) linac, and the neutrons are produced by the /sup 7/Li(p,n)/sup 7/Be reaction. A liquid lithium target and modulator assembly are designed to provide a high flux of epithermal neutrons. The patient is administered a tumor-specific /sup 10/Be-enriched compound and is irradiated by the neutrons to create a highly localized dose from the reaction /sup 10/B(n,..cap alpha..)/sup 7/Li. An RFQ accelerator-based neutron source for BNCT is compact, which makes it practical to site the facility within a hospital. 11 refs., 5 figs., 1 tab

Basis for low beam loss in the high-current APT linac

The present evidence that the APT proton linac design will meet its goal of low beam loss operation. The conclusion has three main bases: (1) extrapolation from the understanding of the performance of the 800-MeV LANSCE proton linac at Los Alamos, (2) the theoretical understanding of the dominant halo-forming mechanism in the APT accelerator from physics models and multiparticle simulations, and (3) the conservative approach and key principles underlying the design of the APT linac, which are aimed at minimizing beam halo and providing large apertures to reduce beam loss to a very low value

Creating European guidelines for Chiropractic Incident Reporting and Learning Systems (CIRLS): relevance and structure

<p>Abstract</p> <p>Background</p> <p>In 2009, the heads of the Executive Council of the European Chiropractors' Union (ECU) and the European Academy of Chiropractic (EAC) involved in the European Committee for Standardization (CEN) process for the chiropractic profession, set out to establish European guidelines for the reporting of adverse reactions to chiropractic treatment. There were a number of reasons for this: first, to improve the overall quality of patient care by aiming to reduce the application of potentially harmful interventions and to facilitate the treatment of patients within the context of achieving maximum benefit with a minimum risk of harm; second, to inform the training objectives for the Graduate Education and Continuing Professional Development programmes of all 19 ECU member nations, regarding knowledge and skills to be acquired for maximising patient safety; and third, to develop a guideline on patient safety incident reporting as it is likely to be part of future CEN standards for ECU member nations.</p> <p>Objective</p> <p>To introduce patient safety incident reporting within the context of chiropractic practice in Europe and to help individual countries and their national professional associations to develop or improve reporting and learning systems.</p> <p>Discussion</p> <p>Providing health care of any kind, including the provision of chiropractic treatment, can be a complex and, at times, a risky activity. Safety in healthcare cannot be guaranteed, it can only be improved. One of the most important aspects of any learning and reporting system lies in the appropriate use of the data and information it gathers. Reporting should not just be seen as a vehicle for obtaining information on patient safety issues, but also be utilised as a tool to facilitate learning, advance quality improvement and to ultimately minimise the rate of the occurrence of errors linked to patient care.</p> <p>Conclusions</p> <p>Before a reporting and learning system can be established it has to be clear what the objectives of the system are, what resources will be required and whether the implementing organisation has the capacity to operate the system to its full advantage. Responding to adverse event reports requires the availability of experts to analyse the incidents and to provide feedback in a timely fashion. A comprehensive strategy for national implementation must be in place including, but not limited to, presentations at national meetings, the provision of written information to all practitioners and the running of workshops, so that all stakeholders fully understand the purposes of adverse event reporting. Unless this is achieved, any system runs the risk of failure, or at the very least, limited usefulness.</p

Dendrimer-Based Fluorescent Indicators: In Vitro and In Vivo Applications

BACKGROUND: The development of fluorescent proteins and synthetic molecules whose fluorescence properties are controlled by the environment makes it possible to monitor physiological and pathological events in living systems with minimal perturbation. A large number of small organic dyes are available and routinely used to measure biologically relevant parameters. Unfortunately their application is hindered by a number of limitations stemming from the use of these small molecules in the biological environment. PRINCIPAL FINDINGS: We present a novel dendrimer-based architecture leading to multifunctional sensing elements that can overcome many of these problems. Applications in vitro, in living cells and in vivo are reported. In particular, we image for the first time extracellular pH in the brain in a mouse epilepsy model. CONCLUSION: We believe that the proposed architecture can represent a useful and novel tool in fluorescence imaging that can be widely applied in conjunction with a broad range of sensing dyes and experimental setups