Effective elastic properties of randomly distributed void models for porous materials

This is the post-print version of the final paper published in International Journal of Mechanical Sciences. The published article is available from the link below. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. Copyright @ 2010 Elsevier B.V.Many 2D analytical models are available for estimating the effective elastic properties of porous materials. Most of these models adopt circular voids of a uniform diameter in superlattice arrays, such as unit void or periodically positioned models. There are two principal issues in a realistic representation of porous materials: the random distribution of a statistically sufficiently large number of voids in the model, and the random distribution of the size and position of the voids. Numerical schemes such as the FEM or the BEM have also been presented to cater for regular patterned circular voids. However, due to the large number of elements needed to produce sufficient accuracy for the curved boundary of circular voids or modelling a statistically sufficient number of voids with a random distribution in both the void size and the position, no such model has yet been produced. Modelling based on an FEM approach using a simplified approximation for void geometry is proposed here for the calculation of the effective elastic properties of porous solids. A plane strain model of a square geometry is adopted for a 2D array of voids. This simplified square shape allows a large number of voids to be simulated with a random distribution for both void sizes and their locations. The problem of anisotropy, which arises from the square shape, is discussed. It is verified that along the two principal directions (parallel to the sides of the square voids), the elastic properties remain the same as those predicted by using a circular void geometry. This square-shaped approximation, with its reduced requirement for FE analysis, has the potential to be extended to 3-dimensional modelling for a realistic simulation of engineering materials.University of Aberdee

The spin and charge gaps of the half-filled N-leg Kondo ladders

In this work, we study N-leg Kondo ladders at half-filling through the density matrix renormalization group. We found non-zero spin and charge gaps for any finite number of legs and Kondo coupling $J>0$. We also show evidence of the existence of a quantum critical point in the two dimensional Kondo lattice model, in agreement with previous works. Based on the binding energy of two holes, we did not find evidence of superconductivity in the 2D Kondo lattice model close to half-filling.Comment: 4 pages, 1 table, 3 fig

Structural modelling and testing of failed high energy pipe runs: 2D and 3D pipe whip

Copyright @ 2011 ElsevierThe sudden rupture of a high energy piping system is a safety-related issue and has been the subject of extensive study and discussed in several industrial reports (e.g. [2], [3] and [4]). The dynamic plastic response of the deforming pipe segment under the blow-down force of the escaping liquid is termed pipe whip. Because of the potential damage that such an event could cause, various geometric and kinematic features of this phenomenon have been modelled from the point of view of dynamic structural plasticity. After a comprehensive summary of the behaviour of in-plane deformation of pipe runs [9] and [10] that deform in 2D in a plane, the more complicated case of 3D out-of-plane deformation is discussed. Both experimental studies and modelling using analytical and FE methods have been carried out and they show that, for a good estimate of the “hazard zone” when unconstrained pipe whip motion could occur, a large displacement analysis is essential. The classical, rigid plastic, small deflection analysis (e.g. see [2] and [8]), is valid for estimating the initial failure mechanisms, however it is insufficient for describing the details and consequences of large deflection behaviour

Impurity Energy Level Within The Haldane Gap

An impurity bond $J{'}$ in a periodic 1D antiferromagnetic, spin 1 chain with exchange $J$ is considered. Using the numerical density matrix renormalization group method, we find an impurity energy level in the Haldane gap, corresponding to a bound state near the impurity bond. When $J{'}<J$ the level changes gradually from the edge of the Haldane gap to the ground state energy as the deviation $dev=(J-J{'})/J$ changes from 0 to 1. It seems that there is no threshold. Yet, there is a threshold when $J{'}>J$. The impurity level appears only when the deviation $dev=(J{'}-J)/J{'}$ is greater than $B_{c}$, which is near 0.3 in our calculation.Comment: Latex file,9 pages uuencoded compressed postscript including 4 figure

Field-induced gap in the spin-1/2 antiferromagnetic Heisenberg chain: A density matrix renormalization group study

We study the spin-1/2 antiferromagnetic Heisenberg chain in both uniform and (perpendicular) staggered magnetic fields using the density-matrix renormalization-group method. This model has been shown earlier to describe the physics of the copper benzoate materials in magnetic field. In the present work, we extend the study to more general case for a systematic investigation of the field-induced gap and related properties of the spin-1/2 antiferromagnetic Heisenberg chain. In particular, we explore the high magnetic field regime where interesting behaviors in the field-induced gap, magnetization, and spin correlation functions are found. Careful examination of the low energy properties and magnetization reveals interesting competing effects of the staggered and uniform fields. The incommensurate behavior in the spin correlation functions is demonstrated and discussed in detail. The present work reproduces earlier results in good agreement with experimental data on copper benzoate and predicts new interesting field-induced features at very high magnetic field.Comment: 8 pages, 6 figure

A Three-Dimensional Position Architecture Using Digital TDE Receiver and Cylindrical Array Antenna

AbstractThe robust three-dimensional position architecture is proposed in the paper, where the hybrid time difference of arrival (TDOA) and direction of arrival (DOA) position system was designed to backup the four-station TDOA position system. The digital time delay estimation (TDE) receiver is used for TDOA measurement and the cylindrical array antenna is used for DOA measurement. The general formula of linear phase compensation for cylindrical array antenna in horizontal plane is derived. The detection probability of the TDE receiver and the circular error probability (CEP) of the position systems over Rayleigh fading channel were numerically computed in three-dimensional space. Simulations indicate that the position accuracy of the four-station TDOA position system is degraded but the location function can be retained by the hybrid TDOA and DOA position system when any one of four-stations is out of work

Impurity state in Haldane gap for S=1 Heisenberg antiferromagnetic chain with bond doping

Using a new impurity density matrix renormalization group scheme, we establish a reliable picture of how the low lying energy levels of a $S=1$ Heisenberg antiferromagnetic chain change {\it quantitatively} upon bond doping. A new impurity state gradually occurs in the Haldane gap as $J' < J$, while it appears only if $J'/J>\gamma_c$ with $1/\gamma_c=0.708$ as $J'>J$. The system is non-perturbative as $1\leq J'/J\leq\gamma_c$. This explains the appearance of a new state in the Haldane gap in a recent experiment on Y$_{2-x}$Ca$_x$BaNiO$_5$ [J.F. DiTusa, et al., Phys. Rev. Lett. 73 1857(1994)].Comment: 4 pages of uuencoded gzip'd postscrip

Quasi-Periodic Releases of Streamer Blobs and Velocity Variability of the Slow Solar Wind near the Sun

We search for persistent and quasi-periodic release events of streamer blobs during 2007 with the Large Angle Spectrometric Coronagraph on the \textit{Solar and Heliospheric Observatory} and assess the velocity of the slow solar wind along the plasma sheet above the corresponding streamer by measuring the dynamic parameters of blobs. We find 10 quasi-periodic release events of streamer blobs lasting for three to four days. In each day of these events, we observe three-five blobs. The results are in line with previous studies using data observed near the last solar minimum. Using the measured blob velocity as a proxy for that of the mean flow, we suggest that the velocity of the background slow solar wind near the Sun can vary significantly within a few hours. This provides an observational manifestation of the large velocity variability of the slow solar wind near the Sun.Comment: 14 pages, 5 figures, accepted by Soalr Physic

Potential loss of nutrients from different rearing strategies for fattening pigs on pasture

Nutrient load and distribution on pasture were investigated with fattening pigs that: 1) spend a proportion of or their entire life on pasture, 2) were fed either restrictively or ad libitum, and 3) were weaned at different times of the year. The N and P retention in pigs decreased the longer they were kept on pasture. The contents of soil inorganic N and exchangeable K were significantly raised compared to the soil outside the enclosures but with no differences between treatments. Pig grazing did not affect extractable soil P. Regular moving of huts, feeding and water troughs was effective in ensuring that nutrients were more evenly distributed on the paddocks. Grass cover, as determined by spectral reflectance, was not related to the experimental treatments but only to time of year. During spring and summer, grass was present in parts of the paddocks, whereas during autumn and winter the pigs kept grass cover below 10%. Fattening pigs on pasture carries a high risk of nutrient loss and it is concluded that the most environmentally acceptable way of keeping fattening pigs on pasture involves a combination of reduced dietary N intake, reduced stocking rate and seasonal rather than all year production

Low-energy properties and magnetization plateaus in a 2-leg mixed spin ladder

Using the density matrix renormalization group technique we investigate the low-energy properties and the magnetization plateau behavior in a 2-leg mixed spin ladder consisting of a spin-1/2 chain coupled with a spin-1 chain. The calculated results show that the system is in the same universality class as the spin-3/2 chain when the interchain coupling is strongly ferromagnetic, but the similarity between the two systems is less clear under other coupling conditions. We have identified two types of magnetization plateau phases. The calculation of the magnetization distribution on the spin-1/2 and the spin-1 chains on the ladder shows that one plateau phase is related to the partially magnetized valence-bond-solid state, and the other plateau state contains strongly coupled S=1 and s=1/2 spins on the rung.Comment: 6 pages with 8 eps figure