115 research outputs found
Electric field effects on magnetotransport properties of multiferroic Py/YMnO3/Pt heterostructures
We report on the exchange bias between antiferromagnetic and ferroelectric
hexagonal YMnO3 epitaxial thin films sandwiched between a metallic electrode
(Pt) and a soft ferromagnetic layer (Py). Anisotropic magnetoresistance
measurements are performed to monitor the presence of an exchange bias field.
When the heteroestructure is biased by an electric field, it turns out that the
exchange bias field is suppressed. We discuss the dependence of the observed
effect on the amplitude and polarity of the electric field. Particular
attention is devoted to the role of current leakage across the ferroelectric
layer.Comment: Accepted for publication in Philosophical Magazine Letters (Special
issue on multiferroics
Металографічний аналіз потенційних ділянок зародження руйнування зони термічного вливу низьковуглицевих сталей після лазерного зварювання
The work investigates the detection of dangerous areas of the zones of thermal impact on the basis of the research of welding joint structure formation after laser welding of low-carbon steels 09Mn2Si, 10CrNiCu, 10Mn2VNb. The complex of studies carried out showed that the welded joint is structurally divided into several zones. At the same time, metallographic analysis showed that in the zones of the welded joint there is a conglomerate of structures, which contains components characteristic both for metal in the cast state and for metal after accelerated cooling.Досліджено виявлення небезпечних ділянок зони термічного впливу на підставі дослідження формування структури зварного з'єднання після лазерного зварювання низьковуглецевих сталей 09Г2С, 10ХСНД, 10Г2ФБ. Проведений комплекс досліджень показав, що зварене з'єднання структурно розділити на кілька зон. При цьому, металографічний аналіз показав, що в зонах зварного з'єднання присутні конгломерат структур, який містить складові характерні як для металу в литому стані так і для металу після прискореного охолодження.Исследовано выявление опасных участков зоны термического влияния на основании исследования формирования структуры сварного соединения после лазерной сварки низкоуглеродистых сталей 09Г2С, 10ХСНД, 10Г2ФБ. Проведенный комплекс исследований показал, что сварное соединение структурно разделить на несколько зон. При этом, металлографический анализ показал, что в зонах сварного соединения присутствуют конгломерат структур, который содержит составляющие характерные как для металла в литом состоянии так и для металла после ускоренного охлаждения
Pressure dependence of the Shubnikov-de Haas oscillation pectrum of beta''-(BEDT-TTF)4(NH4)[Cr(C2O4)3].DMF
The Shubnikov-de Haas (SdH) oscillation spectra of the
beta''-(BEDT-TTF)4(NH4)[Cr(C2O4)\_3].DMF organic metal have been studied in
pulsed magnetic fields of up to either 36 T at ambient pressure or 50 T under
hydrostatic pressures of up to 1 GPa. The ambient pressure SdH oscillation
spectra can be accounted for by up to six fundamental frequencies which points
to a rather complex Fermi surface (FS). A noticeable pressure-induced
modification of the FS topology is evidenced since the number of frequencies
observed in the spectra progressively decreases as the pressure increases.
Above 0.8 GPa, only three compensated orbits are observed, as it is the case
for several other isostructural salts of the same family at ambient pressure.
Contrary to other organic metals, of which the FS can be regarded as a network
of orbits, no frequency combinations are observed for the studied salt, likely
due to high magnetic breakdown gap values or (and) high disorder level
evidenced by Dingle temperatures as large as about 7 K.Comment: To be published in European Physical Journal
Slow oscillations of magnetoresistance in quasi-two-dimensional metals
Slow oscillations of the interlayer magnetoresistance observed in the layered
organic metal -(BEDT-TTF)IBr are shown to originate from the
slight warping of its Fermi surface rather than from independent small
cyclotron orbits. Unlike the usual Shubnikov-de Haas effect, these oscillations
are not affected by the temperature smearing of the Fermi distribution and can
therefore become dominant at high enough temperatures. We suggest that the slow
oscillations are a general feature of clean quasi-two-dimensional metals and
discuss possible applications of the phenomenon.Comment: 11 pages, 3 figure
Indication for the coexistence of closed orbit and quantum interferometer with the same cross section in the organic metal (ET)4(H3O)[Fe(C2O4)3].C6H4Cl2: Persistence of SdH oscillations above 30 K
Shubnikov-de Haas (SdH) and de Haas-van Alphen (dHvA) oscillations spectra of
the quasi-two dimensional charge transfer salt
"-(ET)(HO)[Fe(CO)]CHCl have been
investigated in pulsed magnetic fields up to 54 T. The data reveal three basic
frequencies F, F and F, which can be interpreted on the basis
of three compensated closed orbits at low temperature. However a very weak
thermal damping of the Fourier component F, with the highest amplitude, is
evidenced for SdH spectra above about 6 K. As a result, magnetoresistance
oscillations are observed at temperatures higher than 30 K. This feature, which
is not observed for dHvA oscillations, is in line with quantum interference,
pointing to a Fermi surface reconstruction in this compound.Comment: published in Eur. Phys. J. B 71 203 (2009
Robust isothermal electric switching of interface magnetization: A route to voltage-controlled spintronics
Roughness-insensitive and electrically controllable magnetization at the
(0001) surface of antiferromagnetic chromia is observed using magnetometry and
spin-resolved photoemission measurements and explained by the interplay of
surface termination and magnetic ordering. Further, this surface in placed in
proximity with a ferromagnetic Co/Pd multilayer film. Exchange coupling across
the interface between chromia and Co/Pd induces an electrically controllable
exchange bias in the Co/Pd film, which enables a reversible isothermal (at room
temperature) shift of the global magnetic hysteresis loop of the Co/Pd film
along the magnetic field axis between negative and positive values. These
results reveal the potential of magnetoelectric chromia for spintronic
applications requiring non-volatile electric control of magnetization.Comment: Single PDF file: 27 pages, 6 figures; version of 12/30/09; submitted
to Nature Material
Comparison of coherent and weakly incoherent transport models for the interlayer magnetoresistance of layered Fermi liquids
The interlayer magnetoresistance of layered metals in a tilted magnetic field
is calculated for two distinct models for the interlayer transport. The first
model involves coherent interlayer transport and makes use of results of
semi-classical or Bloch-Boltzmann transport theory. The second model involves
weakly incoherent interlayer transport where the electron is scattered many
times within a layer before tunneling into the next layer. The results are
relevant to the interpretation of experiments on angular-dependent
magnetoresistance oscillations (AMRO) in quasi-one- and quasi-two-dimensional
metals. We find that the dependence of the magnetoresistance on the direction
of the magnetic field is identical for both models except when the field is
almost parallel to the layers. An important implication of this result is that
a three-dimensional Fermi surface is not necessary for the observation of the
Yamaji and Danner oscillations seen in quasi-two- and quasi-one-dimensional
metals, respectively. A universal expression is given for the dependence of the
resistance at AMRO maxima and minima on the magnetic field and scattering time
(and thus the temperature). We point out three distinctive features of coherent
interlayer transport: (i) a beat frequency in the magnetic oscillations of
quasi-two-dimensional systems, (ii) a peak in the angular-dependent
magnetoresistance when the field is sufficiently large and parallel to the
layers, and (iii) a crossover from a linear to a quadratic field dependence for
the magnetoresistance when the field is parallel to the layers. Properties (i)
and (ii) are compared with published experimental data for a range of
quasi-two-dimensional organic metals and for Sr2RuO4.Comment: 21 pages, RevTeX + epsf, 4 figures. Published version. Subsection
added. References update
Reversible Control of Magnetic Interactions by Electric Field in a Single Phase Material
Intrinsic magnetoelectric coupling describes the interaction between magnetic
and electric polarization through an inherent microscopic mechanism in a single
phase material. This phenomenon has the potential to control the magnetic state
of a material with an electric field, an enticing prospect for device
engineering. We demonstrate 'giant' magnetoelectric cross-field control in a
single phase rare earth titanate film. In bulk form, EuTiO3 is
antiferromagnetic. However, both anti and ferromagnetic interactions coexist
between different nearest neighbor europium ions. In thin epitaxial films,
strain can be used to alter the relative strength of the magnetic exchange
constants. Here, we not only show that moderate biaxial compression
precipitates local magnetic competition, but also demonstrate that the
application of an electric field at this strain state, switches the magnetic
ground state. Using first principles density functional theory, we resolve the
underlying microscopic mechanism resulting in the EuTiO3 G-type magnetic
structure and illustrate how it is responsible for the 'giant' cross-field
magnetoelectric effect
Алгоритм проведення первинної статистичної обробки масивів експериментальних даних
Purpose. Construction of an algorithm for preliminary (primary) estimation of arrays of experimental data for further obtaining a mathematical model of the process under study. Methodology. The use of the main regularities of the theory of processing arrays of experimental values in the initial analysis of data. Originality. An algorithm for performing a primary statistical analysis of the arrays of experimental data is given. Practical value. Development of methods for revealing statistically unreliable values in arrays of experimental data for the purpose of their subsequent detailed analysis and construction of a mathematical model of the studied processes.Цель статьи. Построение алгоритма предварительной (первичной) оценки массивов экспериментальных данных для дальнейшего получения математической модели исследуемого процесса. Методика. Использование основных закономерностей теории обработки массивов экспериментальных значений при первичном анализе данных. Научная новизна. Приведен алгоритм проведения первичного статистического анализа массивов экспериментальных данных. Практическая значимость. Разработка методов выявления статистически не достоверных значений в массивах экспериментальных данных с целью последующего их детального анализа и построения математической модели исследуемых процессов.Мета статті. Побудова алгоритму попередньої (первинної) оцінки масивів експериментальних даних для подальшого математичного моделювання процессу, що досліджується. Методика. Використання основних закономірностей теорії обробки масивів експериментальних значень для попереднього аналізу даних. Наукова новизна. Наведено алгоритм проведення первинного статистичного аналізу масивів експериментальних даних. Практична значимість. Розробка методів виявлення статистично не достовірних значень у масивах експериментальних даних із метою наступного детального аналізу та побудови математичних моделей процесів, що досліджуються
- …