9 research outputs found

    Setup planning for machining

    No full text
    Professionals as well as researchers can benefit from this comprehensive introduction into the topic of setup planning, which reflects the latest state of research and gives hands-on examples. Starting with a brief but thorough introduction, this book explains the significance of setup planning in process planning and includes a reflection on its external constraints. Step-by-step the different phases of setup planning are outlined and traditional as well as modern approaches, such as fuzzy logic based setup planning, on the solution of setup planning problems are presented. Three detailed examples of applications provide a clear and accessible insight into the up-to-date techniques and various approaches in setup planning

    A brief history of mechanical engineering

    No full text
    What is mechanical engineering? What a mechanical engineering does? How did the mechanical engineering change through ages? What is the future of mechanical engineering? This book answers these questions in a lucid manner. It also provides a brief chronological history of landmark events and answers questions such as: When was steam engine invented? Where was first CNC machine developed? When did the era of additive manufacturing start? When did the marriage of mechanical and electronics give birth to discipline of mechatronics? This book informs and create interest on mechanical engineering in the general public and particular in students. It also helps to sensitize the engineering fraternity about the historical aspects of engineering. At the same time, it provides a common sense knowledge of mechanical engineering in a handy manner

    Ultrasonic-assisted machining processes: a review

    No full text

    Effect of FeNb on microstructure and mechanical properties of Al-Cu-Ni alloy

    No full text
    The present research work deals with the investigation of mechanical properties and microstructure evaluation by particulate reinforcement of ferroniobium (FeNb) into Al-5Cu-2Ni alloy. The two-step stir casting method was employed for the fabrication of the material. The metallography study was carried out with optical microscopy (OM), scanning electron microscopy (SEM) with energy-dispersive x-ray spectroscopy (EDS), and x-ray diffraction (XRD). The XRD peaks revealed the presence of the Fe _2 Nb phase and intermetallic compound phases of Al _2 Cu and Al _3 Ni _2 . However, the Fe _2 Nb phase is in the form of short sticks uniformly distributed around the intermetallic compound phases. Tensile strength, microhardness and impact strength were evaluated according to ASTM standards. The average tensile strength and Vickers microhardness of the Al-5Cu-2Ni matrix alloy were 179 MPa and 115 HV respectively. By adding 1%, 3% and 5% of FeNb particulate reinforcement into Al-5Cu-2Ni alloy, the tensile strength could be enhanced to 185, 193 and 207 MPa respectively. The corresponding microhardness values were 130, 132 and 151 HV, respectively. Thus, the addition of 5% ferroniobium particulate reinforcement material could significantly enhance the tensile strength and microhardness of the composites. Fractography revealed that fracture mode changes from ductile to brittle with the reinforcement of FeNb particles. The FeNb particles resist the dislocation movement of the intermetallic compound phases in the composites leading to micro-cracks and subsequent brittle fracture

    Numerical and Experimental Study on Multi-pass Laser Bending of AH36 Steel Strips

    No full text
    Laser bending is a process of bending of plates, small sized sheets, strips and tubes, in which a moving or stationary laser beam heats the workpiece to achieve the desired curvature due to thermal stresses. Researchers studied the effects of different process parameters related to the laser source, material and workpiece geometry on laser bending of metal sheets. The studies are focused on large sized sheets. The workpiece geometry parameters like sheet thickness, length and width also affect the bend angle considerably. In this work, the effects of width and thickness on multi-pass laser bending of AH36 steel strips were studied experimentally and numerically. Finite element model using ABAQUS® was developed to investigate the size effect on the prediction of the bend angle. Microhardness and flexure tests showed an increase in the flexural strength as well as microhardness in the scanned zone. The microstructures of the bent strips also supported the physical observations

    Abstracts of National Conference on Research and Developments in Material Processing, Modelling and Characterization 2020

    No full text
    This book presents the abstracts of the papers presented to the Online National Conference on Research and Developments in Material Processing, Modelling and Characterization 2020 (RDMPMC-2020) held on 26th and 27th August 2020 organized by the Department of Metallurgical and Materials Science in Association with the Department of Production and Industrial Engineering, National Institute of Technology Jamshedpur, Jharkhand, India. Conference Title: National Conference on Research and Developments in Material Processing, Modelling and Characterization 2020Conference Acronym: RDMPMC-2020Conference Date: 26–27 August 2020Conference Location: Online (Virtual Mode)Conference Organizer: Department of Metallurgical and Materials Engineering, National Institute of Technology JamshedpurCo-organizer: Department of Production and Industrial Engineering, National Institute of Technology Jamshedpur, Jharkhand, IndiaConference Sponsor: TEQIP-
    corecore