Supramolecular Composite Materials from Cellulose, Chitosan, and Cyclodextrin: Facile Preparation and Their Selective Inclusion Complex Formation with Endocrine Disruptors

We have successfully developed a simple one-step method of preparing high-performance supramolecular polysaccharide composites from cellulose (CEL), chitosan (CS), and (2,3,6-tri-O-acetyl)-α-, β-, and γ-cyclodextrin (α-, β-, and γ-TCD). In this method, [BMIm+Cl–], an ionic liquid (IL), was used as a solvent to dissolve and prepare the composites. Because a majority (\u3e88%) of the IL used was recovered for reuse, the method is recyclable. XRD, FT-IR, NIR, and SEM were used to monitor the dissolution process and to confirm that the polysaccharides were regenerated without any chemical modifications. It was found that unique properties of each component including superior mechanical properties (from CEL), excellent adsorption for pollutants and toxins (from CS), and size/structure selectivity through inclusion complex formation (from TCDs) remain intact in the composites. Specifically, the results from kinetics and adsorption isotherms show that whereas CS-based composites can effectively adsorb the endocrine disruptors (polychlrophenols, bisphenol A), their adsorption is independent of the size and structure of the analytes. Conversely, the adsorption by γ-TCD-based composites exhibits a strong dependence on the size and structure of the analytes. For example, whereas all three TCD-based composites (i.e., α-, β-, and γ-TCD) can effectively adsorb 2-, 3-, and 4-chlorophenol, only the γ-TCD-based composite can adsorb analytes with bulky groups including 3,4-dichloro- and 2,4,5-trichlorophenol. Furthermore, the equilibrium sorption capacities for the analytes with bulky groups by the γ-TCD-based composite are much higher than those by CS-based composites. Together, these results indicate that the γ-TCD-based composite with its relatively larger cavity size can readily form inclusion complexes with analytes with bulky groups, and through inclusion complex formation, it can strongly adsorb many more analytes and has a size/structure selectivity compared to that of CS-based composites that can adsorb the analyte only by surface adsorption

A continuum-microscopic method based on IRBFs and control volume scheme for viscoelastic fluid flows

A numerical computation of continuum-microscopic model for visco-elastic flows based on the Integrated Radial Basis Function (IRBF) Control Volume and the Stochastic Simulation Techniques (SST) is reported in this paper. The macroscopic flow equations are closed by a stochastic equation for the extra stress at the microscopic level. The former are discretised by a 1D-IRBF-CV method while the latter is integrated with Euler explicit or Predictor-Corrector schemes. Modelling is very efficient as it is based on Cartesian grid, while the integrated RBF approach enhances both the stability of the procedure and the accuracy of the solution. The proposed method is demonstrated with the solution of the start-up Couette flow of the Hookean and FENE dumbbell model fluids

Choosing the best model in the presence of zero trade: a fish product analysis

The purpose of the paper is to test the hypothesis that food safety (chemical) standards act as barriers to international seafood imports. We use zero-accounting gravity models to test the hypothesis that food safety (chemical) standards act as barriers to international seafood imports. The chemical standards on which we focus include chloramphenicol required performance limit, oxytetracycline maximum residue limit, fluoro-quinolones maximum residue limit, and dichlorodiphenyltrichloroethane (DDT) pesticide residue limit. The study focuses on the three most important seafood markets: the European Union’s 15 members, Japan, and North America

Cellulose, Chitosan, and Keratin Composite Materials. Controlled Drug Release

A method was developed in which cellulose (CEL) and/or chitosan (CS) were added to keratin (KER) to enable [CEL/CS+KER] composites to have better mechanical strength and wider utilization. Butylmethylimmidazolium chloride ([BMIm+Cl–]), an ionic liquid, was used as the sole solvent, and because the [BMIm+Cl–] used was recovered, the method is green and recyclable. Fourier transform infrared spectroscopy results confirm that KER, CS, and CEL remain chemically intact in the composites. Tensile strength results expectedly show that adding CEL or CS into KER substantially increases the mechanical strength of the composites. We found that CEL, CS, and KER can encapsulate drugs such as ciprofloxacin (CPX) and then release the drug either as a single or as two- or three-component composites. Interestingly, release rates of CPX by CEL and CS either as a single or as [CEL+CS] composite are faster and independent of concentration of CS and CEL. Conversely, the release rate by KER is much slower, and when incorporated into CEL, CS, or CEL+CS, it substantially slows the rate as well. Furthermore, the reducing rate was found to correlate with the concentration of KER in the composites. KER, a protein, is known to have secondary structure, whereas CEL and CS exist only in random form. This makes KER structurally denser than CEL and CS; hence, KER releases the drug slower than CEL and CS. The results clearly indicate that drug release can be controlled and adjusted at any rate by judiciously selecting the concentration of KER in the composites. Furthermore, the fact that the [CEL+CS+KER] composite has combined properties of its components, namely, superior mechanical strength (CEL), hemostasis and bactericide (CS), and controlled drug release (KER), indicates that this novel composite can be used in ways which hitherto were not possible, e.g., as a high-performance bandage to treat chronic and ulcerous wounds

Synergistic Adsorption of Heavy Metal Ions and Organic Pollutants by Supramolecular Polysaccharide Composite Materials from Cellulose, Chitosan and Crown Ether

We have developed a simple one-step method to synthesize novel supramolecular polysaccharide composites from cellulose (CEL), chitosan (CS) and benzo-15-crown 5 (B15C5). Butylmethylimidazolium chloride [BMIm+Cl−], an ionic liquid (IL), was used as a sole solvent for dissolution and preparation of the composites. Since majority of [BMIm+Cl−] used was recovered for reuse, the method is recyclable. The [CEL/CS + B15C5] composites obtained retain properties of their components, namely superior mechanical strength (from CEL), excellent adsorption capability for heavy metal ions and organic pollutants (from B15C5 and CS). More importantly, the [CEL/CS + B15C5] composites exhibit truly supramolecular properties. By itself CS, CEL and B15C5 can effectively adsorb Cd2+, Zn2+ and 2,4,5-trichlorophenol. However, adsorption capability of the composite was substantially and synergistically enhanced by adding B15C5 to either CEL and/or CS. That is, the adsorption capacity (qe values) for Cd2+ and Zn2+ by [CS + B15C5], [CEL + B15C5] and [CEL + CS + B15C5] composites are much higher than combined qe values of individual CS, CEL and B15C5 composites. It seems that B15C5 synergistically interact with CS (or CEL) to form more stable complexes with Cd2+ (or Zn2+), and as a consequence, the [CS + B15C5] (or the [CEL + B15C5]) composite can adsorb relatively larger amount Cd2+ (or Zn2+). Moreover, the pollutants adsorbed on the composites can be quantitatively desorbed to enable the [CS + CEL + B15C5] composites to be reused with similar adsorption efficiency