The use of computer-assisted image analysis in measuring the histological structure of the human median nerve

Background and aim: The aim of this study was to assess the histological structure of the median nerve and its motor branch (number and arrangement of nerve bundles) and the cross-sectional area (CSA) of the median nerve (on the level of the carpal tunnel). Material and methods: This study has been conducted using median nerves dissected from cadavers stored in a 10% solution of formaldehyde at the Department of Anatomy of the Jagiellonian University Medical College and cadavers from the Department of Forensic Medicine of the Jagiellonian University Medical College. After dissection the median nerves were stained with haematoxylin and eosin and histological slides were prepared. These were later photographed (16 x magnification) and analysed using ImageJ software. The research protocol was approved by the Jagiellonian University Ethics Committee (registry KBET/209/B/2002). Results: The studied group comprised 8 women and 22 men (age between 23–92 years), yielding a total of 60 median nerves (30 right vs. 30 left). In 4 (6.67%) cases an accessory motor branch was found. The mean CSA of the median nerve was 0.19 cm2. The median nerves from the right hand had a statistically larger CSA (p = 0.017). The number of nerve bundles in the median nerve varied between 13 to 38 and in the motor branch of the median nerve between 4 to 14. Conclusions: The nerve bundles of the median nerve, at the level of the carpal tunnel, display no particular type of arrangement. ImageJ software proved useful in the assessment of the histological structure of the human median nerve and its motor branc

An evaluation of health-related quality of life of patients aroused from prolonged coma when treated by physiotherapists with or without training in the "Academy of Life" programme

Objective: To evaluate the health-related quality of life (HRQOL) in patients aroused from prolonged coma after a severe traumatic brain injury (TBI) treated by physiotherapists trained in the ‘Academy of Life’ programme. It was assumed that physiotherapists who acquired this knowledge and experience would create a better therapeutic milieu, and would be more effective than physiotherapists who had not received this training. Material and methods: 40 patients who had suffered a severe TBI in a motor vehicle accident and had been aroused from prolonged coma were examined. All the patients underwent long-term rehabilitation according to a standard, phased programme. They were divided into two numerically even groups: an experimental group, treated by therapists trained in the ‘Academy of Life’ programme, and a control group, treated by physiotherapists who were not trained in this programme. The research instruments included an analysis of documentation, a structured clinical interview, and the Quality of Life Scale. Results: As hypothesized, the experimental group showed significant improvement in HRQOL, whereas in the control group improvement was statistically non-significant. Conclusions: The patients from the experimental group, treated by physiotherapists trained in the ‘Academy of Life’, obtained a significantly greater improvement in physical and social functioning, and thus in HRQOL, than patients from the control group

The Influence of Sintering Conditions on the Inkjet Printed Paths Resistance

The sintering of elements performed with the inkjet printing technique is one of the stages of flexible printed circuit manufacturing process. It is a crucial factor to determining the printed paths conductivity playing often an important role in the printed circuit. In this paper the study of the influence of thermal sintering conditions (temperature, time) on the resistance of paths made with inkjet printing on flexible substrates by using two electrically conductive inks was presented. The results of the investigations show that the sintering temperature is the main factor determining the paths resistance. Therefore, in some applications the sintering temperature higher than the one specified by the ink manufacturer can be used to decrease the paths resistance and to improve some circuit parameters. However, it should be noticed that the effective resistance decrease occurs only up to a certain temperature due to the appearance cracks in the printed paths

Median nerve thenar motor branch anatomical variations

Aim. The aim of this study was to determine the prevalence of the different types of the median nerve thenar motor branch and to compare them with literature data.Materials and Methods. This study has been conducted using median nerves dissected from cadavers stored in a 10% solution of formaldehyde at the Department of Anatomy, Jagiellonian University Medical College (JUMC) and cadavers from the Department of Forensic Medicine (JUMC). The research protocol was approved by the Jagiellonian University Ethics Committee (registry KBET/209/B/2002).Results. The studied group comprised of 8 (26,7%) women and 22 men (age between 23-92 years), yielding a total of 60 thenar motor branches (30 right vs. 30 left). Forty-seven (78,3%) nerves were classified as extraligamentous, 12 (20%) were subligamentous and 1 (1,7%) was transligamentous. As for the side of origin of the thenar motor branch in 45 cases (75%) it was the radial side and in 2 cases (3,33%) it was the ulnar side.Conclusions. The obtained results confirm that the extraligamentous type of the thenar motor branch is the most common and that the ulnar origin of the thenar motor branch is the rarest

Total anomalous pulmonary vein drainage in a 60-year-old woman diagnosed in an ECG-gated multidetector computed tomography : a case report and review of literature

Purpose: Total anomalous pulmonary vein drainage (TAPVD) is a congenital cardiac defect in which there is no connection between pulmonary veins and the left atrium. Pulmonary veins form a confluence independent of the left atrium and drain to a systemic vein. TAPVD types are: supracardiac, cardiac, infracardiac, and mixed. TAPVD accounts for approximately 1.5-2.2% of all congenital heart diseases. This anomaly is usually diagnosed in the neonatal period, and it coexists with atrial septal defect. Adult cases of TAPVD are rarely reported. Case report: We report a rare case of a 60-year-old woman with incidentally found, uncorrected TAPVD in ECG-gated multidetector computed tomography. In previous echocardiographic examinations partial anomalous pulmonary venous return and atrial septal defect were diagnosed. Conclusions: ECG-gated multidetector computed tomography is a valuable diagnostic method for adults with congenital heart disease. It enables evaluation of coronary arteries and simultaneously provides detailed anatomy of great vessels

FOSS as an efficient tool for extraction of MOSFET compact model parameters

A GNU Octave - based application for device-level compact model evaluation and parameter extraction has been developed. The applications main features are as follows: experimental I-V data importing, generating input data for different circuit simulation programs, running the simulation program to calculate I-V characteristics of the specified models, calculating model misfit and its sensitivity to selected parameter variation, and the comparison of experimental and simulated characteristics. Measured I-V data stored by different measurement systems are accepted. Circuit simulations may be done with Ngspice, Qucs and LTSpiceIV © . Selected aspects of the application are presented and discussed

NEW TRENDS IN AMMONIA NITROGEN REMOVAL FROM WASTEWATER: NITRITATION – ANAMMOX AT LOW TEMPERATURE

Partial nitrification (nitritation) – anammox (anaerobic ammonia oxidation) process is increasingly used to treat wastewater, characterized by a high nitrogen content and high temperature (25 - 40°C). It is connected with the optimal temperature of anammox bacteria, which is at the range between 30 and 40°C. Mainstream application of anammox for the municipal wastewater, characterized by lower temperature seems to be one of the most challenging, but profitable process. Thenceforth, the research performed in the field of the nitritation – anammox at low temperature (10 - 20°C) become more and more intense. Compared with the conventional nitrification – denitrification system, nitritation – anammox reduces oxygen demand, eliminates the need for organic carbon source and produces less excess sludge. As a result, it allows to a significant cost reduction. This paper reviews the most important and recent information in the field of nitritation – anammox process at low temperature. Effective nitrogen removal from the municipal wastewater was demonstrated at 15°C in a pilot scale and at 12°C in a laboratory scale reactor. The best performance is achieved in sequencing batch reactors and moving bed reactors with biofilm or granular biomass, as well as combinations of these technologies. Molecular biology studies shows that anammox bacteria of the genus Candidatus Brocadia may have the biggest predispositions to adapt to low temperature. However, temperature about 10°C, time and method of biomass adaptation are still the main challenges for stable and common nitritation – anammox process

Analysis of residual stress in 1.4539 austenitic steel joints welded with TIG method

The article compares the results of tests of residual stress determined based on Knoop microhardness measurements and obtained experimentally with the use of an x-ray diffractometer. Distribution of residual stress in the weld after strengthening of the surface layer, resulting from shot peening, was specified. A method of residual stress determination proposed by Oppel, based on Knoop microhardness distribution, was applied. An analysis of residual stress of 1.4539 austenitic steel welded joints, made with the use of TIG method and additionally strengthened with shot peening of the surface, showed good agreement of the results obtained both with the sin2y method and based on the microhardness measurement. The highest compression stress has occurred in a so-called Belayev point, approximately of 35 ÷ 40 μm from the surface. Keywords: residual stress, welded joints, TIG, Knoop microhardness, shot peening