2,597 research outputs found
Fatigue crack behaviour : comparing three-point bend test and wedge splitting test data on vibrated concrete using Paris' law
The fatigue behaviour of concrete has become more important for the design of constructions due to the desire to build slimmer structures, which are more sensitive to fatigue loading. This article aims to evaluate and compare the fatigue crack propagation rate in vibrated concrete for four different stress ratios using the Paris-Erdogan law. The data evaluation in this article is based on crack mouth opening displacement (CMOD) measurements from cyclic three-point bending tests on single edge notched beams and from wedge splitting tests on notched cubes, obtained from experiments at Ghent University. For this study, finite element analysis is used to obtain a mathematical relationship between the CMOD and the relative crack length a/W, as well as a relationship between the stress intensity ratio ∆K and a/W. The obtained mathematical relationships were then combined with the measured CMOD values to correlate the test data to the Paris-Erdogan law. Herein, the crack propagation rate da/dN is plotted against the corresponding stress intensity range ∆K in a log-log graph. In a final step, the Paris-Erdogan law parameters C and m were obtained through linear curve fitting on the data points from the obtained graphs. The parameters C and m are then used to compare and evaluate the fatigue crack behavior in vibrated concrete, and the differences between the results from the three-point bend tests and wedge splitting tests
Phylogenetic relationships in Betula (Betulaceae) based on AFLP markers
The genus Betula comprises various species in boreal and temperate climate zones of the Northern Hemisphere. The taxonomy of Betula is controversial and complicated by parallel evolution of morphological traits, polyploidization events, and extensive hybridization and introgression among species. Multilocus molecular data from AFLPs were used to provide phylogenetic information. A large number of polymorphic markers (321 variable bands) were produced in 107 Betula accessions from 23 species and 11 hybrids. The AFLP results were largely congruent with the results from previously examined nuclear DNA markers. Four distinct subgenera were identified within the genus Betula. These subgenera were partly in disagreement with the traditional (but disputed) division of the genus. In addition, the results indicated several groups of conspecific taxa. The majority of the species fell within subgenus Betula and shared a high degree of similarity with B. pendula. All hybrids were associated with this group, and the AFLP data contained signals on putative parents for some of the interspecific hybrids. Subgenus Chamaebetula and part of the Neurobetula species should be merged with Betula. The subgenera Betulenta, Betulaster, and the remaining part of Neurobetula are distinct and well supported. Although our results indicate that four major taxonomic groups can be recognized within the genus Betula, the relationship between them remains unclear. This may be due to the occurrence of hybridization and introgression, which would have a homogenizing effect on the relationships between species. Naturally occurring Betula species of hybrid origin may explain the low bootstrap values within the Betula clade
Out-of-plane coupling structures for optical printed circuit boards
We present an integrated total internal reflection mirror and pluggable coupler that can be used for out-of-plane coupling in an optical PCB. The coupling efficiency of both mirror configurations is measured and compared
Cycle-accurate evaluation of reconfigurable photonic networks-on-chip
There is little doubt that the most important limiting factors of the performance of next-generation Chip Multiprocessors (CMPs) will be the power efficiency and the available communication speed between cores. Photonic Networks-on-Chip (NoCs) have been suggested as a viable route to relieve the off- and on-chip interconnection bottleneck. Low-loss integrated optical waveguides can transport very high-speed data signals over longer distances as compared to on-chip electrical signaling. In addition, with the development of silicon microrings, photonic switches can be integrated to route signals in a data-transparent way. Although several photonic NoC proposals exist, their use is often limited to the communication of large data messages due to a relatively long set-up time of the photonic channels. In this work, we evaluate a reconfigurable photonic NoC in which the topology is adapted automatically (on a microsecond scale) to the evolving traffic situation by use of silicon microrings. To evaluate this system's performance, the proposed architecture has been implemented in a detailed full-system cycle-accurate simulator which is capable of generating realistic workloads and traffic patterns. In addition, a model was developed to estimate the power consumption of the full interconnection network which was compared with other photonic and electrical NoC solutions. We find that our proposed network architecture significantly lowers the average memory access latency (35% reduction) while only generating a modest increase in power consumption (20%), compared to a conventional concentrated mesh electrical signaling approach. When comparing our solution to high-speed circuit-switched photonic NoCs, long photonic channel set-up times can be tolerated which makes our approach directly applicable to current shared-memory CMPs
The Empower project : a new way of assessing and monitoring test comparability and stability
Background: Manufacturers and laboratories might benefit from using a modern integrated tool for quality management/assurance. The tool should not be confounded by commutability issues and focus on the intrinsic analytical quality and comparability of assays as performed in routine laboratories. In addition, it should enable monitoring of long-term stability of performance, with the possibility to quasi "real-time" remedial action. Therefore, we developed the "Empower" project.
Methods: The project comprises four pillars: (i) master comparisons with panels of frozen single-donation samples, (ii) monitoring of patient percentiles and (iii) internal quality control data, and (iv) conceptual and statistical education about analytical quality. In the pillars described here (i and ii), state-of-the-art as well as biologically derived specifications are used.
Results: In the 2014 master comparisons survey, 125 laboratories forming 8 peer groups participated. It showed not only good intrinsic analytical quality of assays but also assay biases/non-comparability. Although laboratory performance was mostly satisfactory, sometimes huge between-laboratory differences were observed. In patient percentile monitoring, currently, 100 laboratories participate with 182 devices. Particularly, laboratories with a high daily throughput and low patient population variation show a stable moving median in time with good between-instrument concordance. Shifts/drifts due to lot changes are sometimes revealed. There is evidence that outpatient medians mirror the calibration set-points shown in the master comparisons.
Conclusions: The Empower project gives manufacturers and laboratories a realistic view on assay quality/comparability as well as stability of performance and/or the reasons for increased variation. Therefore, it is a modern tool for quality management/assurance toward improved patient care
Discrete out-of-plane coupling components for printed circuit board-level optical interconnections
- …