49 research outputs found
Methodology for Calculation of the Marginal Emission Rates from a ComplexCogeneration Facility compared with that of the co-located NY ISO Bus
Cogeneration facilities at commercial and institutional locations are significant emitters carbon dioxide. Many large universities, hospitals and large commercial complexes maintain combined heat and power facilities that are interfaced with wholesale power markets. These facilities both buy and sell electricity in the organized markets while maintaining what is their principle function of provision of thermal energy for heating and cooling. In this paper we provide the theoretical background to calculation of Marginal Emission Rates (MERs), provide an overview of the optimal operation of those facilities, and present the results of a detailed case analysis of the results of a comparison of the MER of an operating cogeneration facility at Cornell University compared with the MER for consumption of electricity at the closest wholesale bus of the New York Independent System Operator (NYISO)
A Wake-Up Call for the Utility Industry: Extreme Weather and Fundamental Lessons from 2021
We have examined the critical extreme weather events of 2021 that resulted in disruptions of normal power system operations, the loss of life, and multibillion dollar losses to the US economy. These impacts occurred due to extreme cold, extreme heat, drought, slower post-landfall dissipation of hurricanes, and more intense large-scale thunderstorm systems. We point to the causes but also argue for the changes in planning and operations required to be prepared for and have responses to these events. Specifically, we focus on recognizing the reality of extreme events and planning for their increasing frequency, intensity, duration, and geographic scope; modifying resource planning and adequacy metrics to incorporate common mode events; enabling the power system to depend on reliable natural gas fuel supplies; redesigning power markets to better compensate resources and flexible demand for reducing the probability of outages; and developing resilient systems
Photovoltaic power systems : review of current market studies : methodology for long term demand projection
Application of sector and location specific models of the "worth" of renewable energy technologies
Renewable energy sources such as solar and wind hold the potential
for providing a significant portion of the U.S. energy requirements in
the decades ahead. Unlike other energy sources their availability is
determined by nonrandom events beyond the control of the consumer. In
addition, macro-, meso-, and microclimatic conditions play a major role
in determining the worth of such renewable energy sources to their
owners. The worth of these new technologies will be a function of owner,
location, and application as well as the traditional capital and
operating cost, i.e., their worth to an owner in the southwest will be
different form that to an owner in the northeast or the southeast.
Dealing with energy sources, with geographic and sectorally specific
energy values and with energy technologies with which we have little or
no experience in the marketplace has created a set of challenges in
analysis and modeling of these new technologies in competition with
traditional energy technologies and with other emerging technologies.
This paper will look at one simulation methodology for estimating the
worth of renewable energy systems providing electricity, such as wind or
solar photovoltaic power systems, and will discuss the interaction
between such systems and traditional electric utilities with which they
may or may not be integrated, be owned or be co-located. The paper
concludes with a discussion of the issues associated with the
incorporation of econometric techniques into such a simulation modeling
structure
The economics of water lifting for small scale irrigation in the third world: |b traditional and photovoltaic technologies
Previously issued as MIT Energy Laboratory Working paper # MIT-EL-78-015wp, August 1978.Much of the non-traditional, irrigated, agricultural land in
developing nations utilizes pumping technologies which have been adapted
from the developed nations. These technologies are adaptable to the
medium and large scale farms (individual farms in excess of 2 hectares)
but are not adaptable to smaller farms. It has been these larger third
world farmers who have been able to take the fullest advantage of the
benefits of new seed varieties in wheat and rice combined with fertilizer
and water, the ingredients of the "green revolution." This short paper
summarizes the experience to date of developing water pumping systems for
small farms in selected deltaic areas of the 'third world,' those areas
in which irrigation water is available at depths between 1.5 and 4.5
meters (m). These areas include the Nile, Euphrates, Indus, Ganges,
Irrawaddy, and Mekong River Basins which combined encompass 50 million
hectares of the earth's surface (less than one percent of the earth's
land area) and contain roughly 250 million people (nearly 7 percent of
the world's population).
The analyses evaluate water supplied by traditional means--human and
animal--by conventional systems--diesel, gasoline and electric--and by
renewable resource systems, in particular photovoltaic powered systems.
A review of previous studies indicate that the value of water for
irrigation is in the range of two to three cents (U.S.) per cubic meter
(m3). The methods of lifting water, available to farmers on land areas
of one hectare or less, provide water at costs in excess of this two to
three cents (U.S.) per m3. Investigations of the Shadoof systems of
North Africa and Asia show costs of water as high as seven cents (U.S.)
per cubic meter. An evaluation of animal power used to operate a Persian
wheel resulted with water costs that varied with the amount of feed
required by the animal from 1 to 4/m3.
Four pumping systems were investigated using conventional power
systems: two diesel, one gasoline, and one electric. Since pumping
systems have relatively fixed sizes and prices, the costs generally
exceed the benefits for the small farmer. The cost per cubic meter for
irrigating one hectare averaged: 3.5¢ (U.S.) for diesel in Chad; 4.0¢
(U.S.) for gasoline in Chad; 3.5Q (U.S.) for diesel in India; and 3.0t
(U.S.) for electricity in India. In each of these instances, the cost of
supplying small scale farmers with water using conventional systems was
greater than the economic value of the water supplied. A fifth pumping
system investigated herein utilized a high technology power system,
photovoltaic cells combined with efficient electric motor and pump
devices. The cost of providing water utilizing the photovoltaic power
system resulted in costs of 2.8t/m3 (U.S.) to lift the water 1.5m and
5.44/m3 (U.S.) for lifting heads of 4.5m, at today's cell prices
(4.00 per
peak watt (Wp), the cost of irrigation water for a lift of 1.5m would be
1.2¢/m3, and for a lift of 4.5m would be 2.3*/m3
The Impact of Distributed Energy Resources on the Bulk Power System: A Deeper Dive
solar photovoltaics (PV), electric storage and electric \ vehicles, demand response, combined heat and \ power, wind, fuel cells, and micro-turbines are \ typically installed on the low or medium voltage \ distribution network. Changes on the distribution \ network can have rippling effects throughout the rest \ of the power system. In this paper, we have \ calculated both traditional locational marginal \ prices (LMPs) and distributed locational marginal \ prices (DLMPs) using an optimal power flow (DC \ OPF). This paper provides an analysis of the energy \ price impacts resulting from significant additions of \ Distributed Energy Resources (DER), namely solar \ PV, electric batteries and demand response, in a \ distribution feeder. The impact is measured in terms \ of nodal approximations to DLMPs, realistic \ calculation of LMPs in the transmission system and \ overall price suppression effects that trickle down to \ consumers on the feeder. Policy implications are \ drawn concerning the potential impacts of \ penetration of DER on future planning, and \ operation of the power system as well as on energy \ markets and the environment
Industrial interfuel substitution : Phase I report, model development and case study executive summary
The Impact of Extreme Weather Events on Planning for Resource Adequacy
Resource Adequacy in the electric power industry has historically focused on sufficient capacity (MW) to serve load on what was forecast to be the worst demand day of the year. The incorporation of intermittent resources both in front of and behind the meter, common mode events and the realization that the metric for reliability should focus on the loss to consumers is refocusing resource adequacy on probabilistic approaches to measurement and analysis. In this paper we focus on planning for resource adequacy given an increasingly stochastic environment in which extreme events caused in large part by changing weather patterns are having increasingly devastating impacts on consumers. These events can no longer be perceived and as being independent (the outage of a generating unit or a line) but are correlated, statistically in both space and time. We argue that there is a need for the definition of probabilistic metrics and methodologies that, over space and time can be used to incorporate the stochastics of common mode and high impact supply disruption