DeepKSPD: Learning Kernel-matrix-based SPD Representation for Fine-grained Image Recognition

Being symmetric positive-definite (SPD), covariance matrix has traditionally been used to represent a set of local descriptors in visual recognition. Recent study shows that kernel matrix can give considerably better representation by modelling the nonlinearity in the local descriptor set. Nevertheless, neither the descriptors nor the kernel matrix is deeply learned. Worse, they are considered separately, hindering the pursuit of an optimal SPD representation. This work proposes a deep network that jointly learns local descriptors, kernel-matrix-based SPD representation, and the classifier via an end-to-end training process. We derive the derivatives for the mapping from a local descriptor set to the SPD representation to carry out backpropagation. Also, we exploit the Daleckii-Krein formula in operator theory to give a concise and unified result on differentiating SPD matrix functions, including the matrix logarithm to handle the Riemannian geometry of kernel matrix. Experiments not only show the superiority of kernel-matrix-based SPD representation with deep local descriptors, but also verify the advantage of the proposed deep network in pursuing better SPD representations for fine-grained image recognition tasks

An experimental investigation of structured roughness on heat transfer during single-phase liquid flow at microscale

This paper was presented at the 3rd Micro and Nano Flows Conference (MNF2011), which was held at the Makedonia Palace Hotel, Thessaloniki in Greece. The conference was organised by Brunel University and supported by the Italian Union of Thermofluiddynamics, Aristotle University of Thessaloniki, University of Thessaly, IPEM, the Process Intensification Network, the Institution of Mechanical Engineers, the Heat Transfer Society, HEXAG - the Heat Exchange Action Group, and the Energy Institute.The effect of structured roughness on the heat transfer of water flowing through minichannels was experimentally investigated in this study. The test channels were formed by two stainless steel plates, 4 mm thick, 12.7 mm tall, and 94.6 mm in length. The surfaces of the plates forming the channel walls were machined with structured roughness elements with height ranging from 18 μm to 96 μm, and pitch ranging from 250 μm to 400 μm. The hydraulic diameter of the channels range from 0.71 mm to 1.87 mm. After accounting for the heat loss from the edges and end sections, the heat transfer coefficient for smooth channels was calculated. The coefficient was found to be in good agreement with the conventional correlations in the laminar entry region and laminar fully developed region. Convective heat transfer was found to be enhanced by the roughness. In the ranges of tested parameters, the roughness element pitch was found to have almost no effect, while the heat transfer coefficient was significantly enhanced by increasing the roughness element height. An earlier transition from laminar to turbulent flow was observed with increasing relative roughness. Comparing with inserts, the highest relative roughness element provided the highest thermal performance factor in the Reynolds number in the range from about 400 to 2800

Investigating properties of the cardiovascular system using innovative analysis algorithms based on ensemble empirical mode decomposition

This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited - Copyright @ 2012 Jia-Rong Yeh et al.Cardiovascular system is known to be nonlinear and nonstationary. Traditional linear assessments algorithms of arterial stiffness and systemic resistance of cardiac system accompany the problem of nonstationary or inconvenience in practical applications. In this pilot study, two new assessment methods were developed: the first is ensemble empirical mode decomposition based reflection index (EEMD-RI) while the second is based on the phase shift between ECG and BP on cardiac oscillation. Both methods utilise the EEMD algorithm which is suitable for nonlinear and nonstationary systems. These methods were used to investigate the properties of arterial stiffness and systemic resistance for a pig's cardiovascular system via ECG and blood pressure (BP). This experiment simulated a sequence of continuous changes of blood pressure arising from steady condition to high blood pressure by clamping the artery and an inverse by relaxing the artery. As a hypothesis, the arterial stiffness and systemic resistance should vary with the blood pressure due to clamping and relaxing the artery. The results show statistically significant correlations between BP, EEMD-based RI, and the phase shift between ECG and BP on cardiac oscillation. The two assessments results demonstrate the merits of the EEMD for signal analysis.This work is supported by the National Science Council (NSC) of Taiwan (Grant number NSC 99-2221-E-155-046-MY3), Centre for Dynamical Biomarkers and Translational Medicine, National Central University, Taiwan which is sponsored by National Science Council (Grant number: NSC 100–2911-I-008-001) and the Chung-Shan Institute of Science & Technology in Taiwan (Grant numbers: CSIST-095-V101 and CSIST-095-V102)

Retrieval of interatomic separations of molecules from laser-induced high-order harmonic spectra

We illustrate an iterative method for retrieving the internuclear separations of N$_2$, O$_2$ and CO$_2$ molecules using the high-order harmonics generated from these molecules by intense infrared laser pulses. We show that accurate results can be retrieved with a small set of harmonics and with one or few alignment angles of the molecules. For linear molecules the internuclear separations can also be retrieved from harmonics generated using isotropically distributed molecules. By extracting the transition dipole moment from the high-order harmonic spectra, we further demonstrated that it is preferable to retrieve the interatomic separation iteratively by fitting the extracted dipole moment. Our results show that time-resolved chemical imaging of molecules using infrared laser pulses with femtosecond temporal resolutions is possible.Comment: 14 pages, 9 figure

An experimental investigation on friction characteristics of air flow in microtube with structured surface roughness

This paper was presented at the 3rd Micro and Nano Flows Conference (MNF2011), which was held at the Makedonia Palace Hotel, Thessaloniki in Greece. The conference was organised by Brunel University and supported by the Italian Union of Thermofluiddynamics, Aristotle University of Thessaloniki, University of Thessaly, IPEM, the Process Intensification Network, the Institution of Mechanical Engineers, the Heat Transfer Society, HEXAG - the Heat Exchange Action Group, and the Energy Institute.Experiments were conducted in this research to investigate roughness effect to flow characteristics and heat transfer coefficient of air and CO2 flow in circular micro-tubes. The internal surface of tested tube included smooth, structure helical fin surfaces and random roughness surfaces. Smooth tube is a commercial S. S. 304 tube with internal diameter of 962 μm and average roughness Ra=0.8 μm, while rough circular tubes were lab made Nickel tube with diameters ranging from 926 μm to 977 μm and roughness elements from 5.3 μm to 44.6 μm in height. The experimental results indicated that f and Nu in smooth tube was predicted very well by conventional correlations both for air and CO2. In rough tubes the friction factor was significant higher than the prediction of conventional correlations both in laminar and turbulent flow. Heat transfer enhancement in laminar flow is slightly, nevertheless, in turbulent flow the heat transfer enhancement was significant and the enhancement increases with the increasing of Re. The random rough tubes revealed a higher heat transfer enhancement than the structured helical fin tubes

Fuzzy Integral with Particle Swarm Optimization for a Motor-Imagery-Based Brain-Computer Interface

© 2016 IEEE. A brain-computer interface (BCI) system using electroencephalography signals provides a convenient means of communication between the human brain and a computer. Motor imagery (MI), in which motor actions are mentally rehearsed without engaging in actual physical execution, has been widely used as a major BCI approach. One robust algorithm that can successfully cope with the individual differences in MI-related rhythmic patterns is to create diverse ensemble classifiers using the subband common spatial pattern (SBCSP) method. To aggregate outputs of ensemble members, this study uses fuzzy integral with particle swarm optimization (PSO), which can regulate subject-specific parameters for the assignment of optimal confidence levels for classifiers. The proposed system combining SBCSP, fuzzy integral, and PSO exhibits robust performance for offline single-trial classification of MI and real-time control of a robotic arm using MI. This paper represents the first attempt to utilize fuzzy fusion technique to attack the individual differences problem of MI applications in real-world noisy environments. The results of this study demonstrate the practical feasibility of implementing the proposed method for real-world applications

ADVISE: Symbolism and External Knowledge for Decoding Advertisements

In order to convey the most content in their limited space, advertisements embed references to outside knowledge via symbolism. For example, a motorcycle stands for adventure (a positive property the ad wants associated with the product being sold), and a gun stands for danger (a negative property to dissuade viewers from undesirable behaviors). We show how to use symbolic references to better understand the meaning of an ad. We further show how anchoring ad understanding in general-purpose object recognition and image captioning improves results. We formulate the ad understanding task as matching the ad image to human-generated statements that describe the action that the ad prompts, and the rationale it provides for taking this action. Our proposed method outperforms the state of the art on this task, and on an alternative formulation of question-answering on ads. We show additional applications of our learned representations for matching ads to slogans, and clustering ads according to their topic, without extra training.Comment: To appear, Proceedings of the European Conference on Computer Vision (ECCV

Adaptive subspace sampling for class imbalance processing

© 2016 IEEE. This paper presents a novel oversampling technique that addresses highly imbalanced data distribution. At present, the imbalanced data that have anomalous class distribution and underrepresented data are difficult to deal with through a variety of conventional machine learning technologies. In order to balance class distributions, an adaptive subspace self-organizing map (ASSOM) that combines the local mapping scheme and globally competitive rule is proposed to artificially generate synthetic samples focusing on minority class samples. The ASSOM is conformed with feature-invariant characteristics, including translation, scaling and rotation, and it retains the independence of basis vectors in each module. Specifically, basis vectors generated via each ASSOM module can avoid generating repeated representative features that offer nothing but heavy computational load. Several experimental results demonstrate that the proposed ASSOM method with supervised learning manner is superior to other existing oversampling techniques