Low-Cost Dual-Band Circularly Polarized Switched-Beam Array for Global Navigation Satellite System

This paper presents the design and development of a dual-band switched-beam microstrip array for global navigation satellite system (GNSS) applications such as ocean reflectometry and remote sensing. In contrast to the traditional Butler matrix, a simple, low cost, broadband and low insertion loss beam switching feed network is proposed, designed and integrated with a dual band antenna array to achieve continuous beam coverage of ±25° around the boresight at the L1 (1.575 GHz) and L2 (1.227 GHz) bands. To reduce the cost, microstrip lines and PIN diode based switches are employed. The proposed switched-beam network is then integrated with dual-band step-shorted annular ring (S-SAR) antenna elements in order to produce a fully integrated compact-sized switched-beam array. Antenna simulation results show that the switched-beam array achieves a maximum gain of 12 dBic at the L1 band and 10 dBic at the L2 band. In order to validate the concept, a scaled down prototype of the simulated design is fabricated and measured. The prototype operates at twice of the original design frequency, i.e., 3.15 GHz and 2.454 GHz and the measured results confirm that the integrated array achieves beam switching and good performance at both bands

Ultra-Wideband Terahertz Channel Propagation Measurements from 500 to 750 GHz

This paper presents empirically based ultrawideband and directional channel measurements, performed in the Terahertz (THz) frequency range over 250 GHz bandwidth from 500 GHz to 750 GHz. Measurement setup calibration technique is presented for free-space measurements taken at Line-of-Sight (LoS) between the transmitter (Tx) and receiver(Rx) in an indoor environment. The atmospheric effects on signal propagation in terms of molecular absorption by oxygen and water molecules are calculated and normalized. Channel impulse responses (CIRs) are acquired for the LoS scenario for different antenna separation distances. From the CIRs the Power Delay Profile (PDP) is presented where multiple delay taps can be observed caused due to group delay products and reflections from the measurement bench

Exploring the cost-effectiveness of high versus low perioperative fraction of inspired oxygen in the prevention of surgical site infections among abdominal surgery patients in three low- and middle-income countries

Background: This study assessed the potential cost-effectiveness of high (80–100%) vs low (21–35%) fraction of inspired oxygen (FiO2) at preventing surgical site infections (SSIs) after abdominal surgery in Nigeria, India, and South Africa. Methods: Decision-analytic models were constructed using best available evidence sourced from unbundled data of an ongoing pilot trial assessing the effectiveness of high FiO2, published literature, and a cost survey in Nigeria, India, and South Africa. Effectiveness was measured as percentage of SSIs at 30 days after surgery, a healthcare perspective was adopted, and costs were reported in US dollars ($). Results: High FiO2 may be cost-effective (cheaper and effective). In Nigeria, the average cost for high FiO2 was$216 compared with $222 for low FiO2 leading to a −$6 (95% confidence interval [CI]: −$13 to −$1) difference in costs. In India, the average cost for high FiO2 was $184 compared with$195 for low FiO2 leading to a −$11 (95$15 to −$6) difference in costs. In South Africa, the average cost for high FiO2 was$1164 compared with $1257 for low FiO2 leading to a −$93 (95% CI: −$132 to −$65) difference in costs. The high FiO2 arm had few SSIs, 7.33% compared with 8.38% for low FiO2, leading to a −1.05 (95% CI: −1.14 to −0.90) percentage point reduction in SSIs. Conclusion: High FiO2 could be cost-effective at preventing SSIs in the three countries but further data from large clinical trials are required to confirm this