464,891 research outputs found
Recommended from our members
Fabrication of a high sensitive Ag-nanoparticle substrate and its application to the detection of toxic substances
Surface Enhanced Raman Scattering (SERS) is typically observed with the substrate in a liquid medium and it has been proposed as a promising technique for detecting low levels of pollutants in liquids. A technique is presented for self-assembly to immobilize Ag nanoparticles (Ag-NPs), with diameters ranging from 100 to 800nm on a solid support. Experimental results have been obtained through experiments using Ag-NPs active substrates to detect Rhodamine 6G (R6G) and crystal violet in the deionized water. Further, the SERS spectrum and Raman spectrum of phoxim were also measured, showing the enhancement in the performance of the active substrate as a result
Dynamic responses of graphite/epoxy laminated beam to impact of elastic spheres
Wave propagation in 90/45/90/-45/902s and 0/45/0/-45/02s laminates of a graphite/epoxy composite due to impact of a steel ball was investigated experimentally and also by using a high order beam finite element. Dynamic strain responses at several locations were obtained using strain gages. The finite element program which incorporated statically determined contact laws was employed to calculate the contact force history as well as the target beam dynamic deformation. The comparison of the finite element solutions with the experimental data indicated that the static contact laws for loading and unloading (developed under this grant) are adequate for the dynamic impact analysis. It was found that for the 0/45/0/-45/02s laminate which has a much larger longitudinal bending rigidity, the use of beam finite elements is not suitable and plate finite element should be used instead
A k-space method for nonlinear wave propagation
A k-space method for nonlinear wave propagation in absorptive media is
presented. The Westervelt equation is first transferred into k-space via
Fourier transformation, and is solved by a modified wave-vector time-domain
scheme [Mast et al., IEEE Tran. Ultrason. Ferroelectr. Freq. Control 48,
341-354 (2001)]. The present approach is not limited to forward propagation or
parabolic approximation. One- and two-dimensional problems are investigated to
verify the method by comparing results to the finite element method. It is
found that, in order to obtain accurate results in homogeneous media, the grid
size can be as little as two points per wavelength, and for a moderately
nonlinear problem, the Courant-Friedrichs-Lewy number can be as small as 0.4.
As a result, the k-space method for nonlinear wave propagation is shown here to
be computationally more efficient than the conventional finite element method
or finite-difference time-domain method for the conditions studied here.
However, although the present method is highly accurate for weakly
inhomogeneous media, it is found to be less accurate for strongly inhomogeneous
media. A possible remedy to this limitation is discussed
Recommended from our members
TDLAS Detection of propane and butane gas over the near-infrared wavelength range from 1678nm to 1686nm
It is important in the petrochemical industry that there are high sensitivity, high accuracy, low-power consumption and intrinsically safe methods for the detection of propane, butane and their gas mixtures, to provide early warning of potential explosion hazards during both storage and transportation of oil and gas. This paper proposes a 'proof of principle' method for the detection of propane and butane using a Tunable Diode Laser Absorption Spectroscopy (TDLAS) technique over the near-infrared wavelength range from 1678nm to 1686nm. This method is relatively inexpensive to implement and is thus more practical, compared with detection methods using wavelengths further into the infra-red, near 3.3μm. The minimum detectable concentration was found to be low as 300ppm for propane or butane. Importantly, the relative measurement errors were all below 3% LEL, which meets the requirements from the petrochemical and oil-gas storage and transportation industries for a field-based system for monitoring of combustible gases
Recommended from our members
A Sensitive and Reliable Carbon Monoxide Monitor for Safety-Focused Applications in Coal Mine Using a 2.33- m Laser Diode
In this paper, a stable and reliable carbon monoxide (CO) monitoring system with high sensitivity (at sub-ppm level) was designed and demonstrated with particular reference to use in the mining industry, tailoring the design specifically for forecasting spontaneous combustion, a major hazard to miners. An appropriate strong CO absorption line was used to minimize the interferences expected from gases present in ambient air, with several preferred CO absorption lines selected and investigated, therefore choosing a distributed feedback (DFB) laser operating at a wavelength of 2330.18 nm as the excitation source. Through a detailed investigation, a minimum detection limit of ~0.2 ppm and a measurement precision of <50 ppb were achieved with a 1 s averaging time. Further in tests, a long-term continuous monitoring evaluation was carried out, demonstrated the excellent stability and reliability of the developed CO monitor. The results obtained have validated the potential of this design of a CO monitoring system for practical monitoring applications underground to enhance safety in the mining industry
B to tensor meson form factors in the perturbative QCD approach
We calculate the form factors within the framework of the
perturbative QCD approach, where denotes a light tensor meson with
. Due to the similarities between the wave functions of a vector and a
tensor meson, the factorization formulas of form factors can be
obtained from the transition through a replacement rule. As a
consequence, we find that these two sets of form factors have the same signs
and correlated -dependence behaviors. At point, the form
factors are smaller than the ones, in accordance with the experimental
data of radiative B decays. In addition, we use our results for the form
factors to explore semilteptonic decays and the branching
fractions can reach the order .Comment: 13 pages, 3 figures, 6 tables, published versio
Phase Transitions for the Brusselator Model
Dynamic phase transitions of the Brusselator model is carefully analyzed,
leading to a rigorous characterization of the types and structure of the phase
transitions of the model from basic homogeneous states. The study is based on
the dynamic transition theory developed recently by the authors
- …